Chopsaw Posted May 20, 2017 Share Posted May 20, 2017 Is it time to have a 24/7 Tech Support help line or is there someone who can explain this. Here is my Video rant for Dermot if you are working again this weekend, which I do appreciate very much. Link to comment Share on other sites More sharing options...
glennw Posted May 20, 2017 Share Posted May 20, 2017 Chopsaw, Post the plan. Link to comment Share on other sites More sharing options...
Chopsaw Posted May 21, 2017 Author Share Posted May 21, 2017 Here is the error code that results when any attempt is made to select another layerset when this condition presents itself. Link to comment Share on other sites More sharing options...
DavidJPotter Posted May 21, 2017 Share Posted May 21, 2017 Even Microsoft does not have "24-7" Tech Support, get real. DJP Link to comment Share on other sites More sharing options...
dshall Posted May 21, 2017 Share Posted May 21, 2017 24/7 suport is right here, if the Americans are asleep, I bet the Aussies or the Kiwis will help. Link to comment Share on other sites More sharing options...
ShaneK Posted May 21, 2017 Share Posted May 21, 2017 Post the plan Chop, let us play in the sand box too. Link to comment Share on other sites More sharing options...
dshall Posted May 21, 2017 Share Posted May 21, 2017 2 hours ago, ShaneK said: Post the plan Chop, let us play in the sand box too. Chop, you know better than that, PTP. Link to comment Share on other sites More sharing options...
DRAWZILLA Posted May 21, 2017 Share Posted May 21, 2017 You also need to send it in to T.S. if you haven't already. Link to comment Share on other sites More sharing options...
Dermot Posted May 21, 2017 Share Posted May 21, 2017 As already mentioned, we don't have 24/7 tech support. We are just not that big of a company and we don't believe in outsourcing our tech support. If we did, you would probably get far worse tech support then you do now. Also, I don't work on weekends or respond to direct requests on Chieftalk. Of course, by posting this on a Sunday, you know that this is not entirely true. As far as your issue is concerned, what you are showing on your screen makes no sense to me. You are obviously in a bad state. The layer set drop down on your main toolbar should always match what shows in either the ALDO or the normal LDO. If exiting Chief and rebooting the computer does not magically fix the problem, then you will need to send your plan into technical support so that we can diagnose what is going on. It will probably take a developer working within the debugger to see what is really going on under the hood. Link to comment Share on other sites More sharing options...
Chopsaw Posted May 21, 2017 Author Share Posted May 21, 2017 Fortunately because I have dealt with this issue before and I am back up and running with minimal data loss, but still frustrated because I have no idea when this will strike again or how bad it will be and also believing that this had already been fixed and it has shown up again confuses me greatly. This is not a plan specific problem but I did save a copy of the plan file in the messed up state to send in to tech support and will continue to work with them in hopes of improving the software for everyone to enjoy. Thanks to all who have offered support and advice as this forum is the best source for help. I agree that outsourcing is not the solution but as the company grows maybe there is another way to provide more tech support hours for international users that could be considered. And Dermot, thank you again for your contribution of personal time. Link to comment Share on other sites More sharing options...
dshall Posted May 21, 2017 Share Posted May 21, 2017 2 hours ago, Dermot said: ...... We are just not that big of a company and we don't believe in outsourcing our tech support. ......... Oh yes you outsource your tech support, it is done by us poor schlubs who do not have a life..... Glenn, Perry, Joe, Chop, Michael et al...... 2 Link to comment Share on other sites More sharing options...
chief58 Posted May 21, 2017 Share Posted May 21, 2017 5 hours ago, dshall said: Oh yes you outsource your tech support, it is done by us poor schlubs who do not have a life..... Glenn, Perry, Joe, Chop, Michael et al...... Scott and others I along with others really do appreciate you guys doing this along with many more on here a lot of times we get better and quicker answers so thank you all Link to comment Share on other sites More sharing options...
johnny Posted May 22, 2017 Share Posted May 22, 2017 14 hours ago, DavidJPotter said: Even Microsoft does not have "24-7" Tech Support, get real. DJP It depends what product you're talking about. I can tell you Office 365 has 24-7 support since the calls are forwarded to somewhere in India as the support center. Myself, I find t he forums here to be better than any tech support i've seen. Link to comment Share on other sites More sharing options...
Smn842 Posted May 22, 2017 Share Posted May 22, 2017 Not sure if this is related but ever since I moved to x9 I've had a number of exceptions in Chief when working with active layer display options. Usually when I am just toggling layer visibility. Once an exception occurs they become more frequent until restarting Chief. Even with the latest 19.3.0.49 I still get this and although restarting Chief fixes it on a few occasions it has corrupted something in the plan. Link to comment Share on other sites More sharing options...
Dennis_Gavin Posted May 22, 2017 Share Posted May 22, 2017 11 hours ago, chief58 said: Scott and others I along with others really do appreciate you guys doing this along with many more on here a lot of times we get better and quicker answers so thank you all 2nd that! Link to comment Share on other sites More sharing options...
mrscott Posted May 22, 2017 Share Posted May 22, 2017 10 hours ago, johnny said: It depends what product you're talking about. I can tell you Office 365 has 24-7 support since the calls are forwarded to somewhere in India as the support center. Myself, I find t he forums here to be better than any tech support i've seen. I concur whole heartedly! I only wish I had more time spend on the forum. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now