zowie123 Posted August 27, 2019 Share Posted August 27, 2019 Hi All, Anyone else feeling this? I crashed while working with cabinets. All x11 Templates, not sure what's going on, also hard to replicate, just started noticing after last update. Thank you, Barry Link to comment Share on other sites More sharing options...
johnny Posted August 27, 2019 Share Posted August 27, 2019 Overall x11 to us seems to have severe performance issues - especially in legacy files. Link to comment Share on other sites More sharing options...
Designer1 Posted August 28, 2019 Share Posted August 28, 2019 Just wanted to add the link to the other post everyones talking about similar things... Link to comment Share on other sites More sharing options...
DavidJPotter Posted August 28, 2019 Share Posted August 28, 2019 Meaning no disrespect but on both of my PC's X11 rocks, I cannot but consider that it is your machines and personal habits that are at work here and NOT Chief Architect software. DJP Link to comment Share on other sites More sharing options...
tommy1 Posted August 28, 2019 Share Posted August 28, 2019 So far absolutely no issues with X11 after latest update. Measured a new job yesterday and will start putting it into Chief today. I'll see if I have any crashes. Link to comment Share on other sites More sharing options...
DG1949 Posted August 28, 2019 Share Posted August 28, 2019 No crashes, but everything seems a bit slower (barely noticeable) with the last (fix) update. Maybe a Mac/Chief thing? But no recent Mac update. Link to comment Share on other sites More sharing options...
tommy1 Posted August 28, 2019 Share Posted August 28, 2019 Don, I haven't noticed anything running slower or at least slow enough to catch my attention. Can you be a little more specific on what's going slower? As mentioned, I'll be watching the program a little closer today. Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted August 28, 2019 Share Posted August 28, 2019 Not having any issues here, no crashes and it seems to run speed wise the same as before the update. Link to comment Share on other sites More sharing options...
DG1949 Posted August 28, 2019 Share Posted August 28, 2019 2 minutes ago, tommy1 said: Don, I haven't noticed anything running slower or at least slow enough to catch my attention. Can you be a little more specific on what's going slower? As mentioned, I'll be watching the program a little closer today. Pretty much across the board with all DBXs and any kind of view other than plan view. It may have nothing to do with Chief, but whatever it might be, it coincided with the last update. No crashes or hangs; just some slowdown. I'll be interested to hear your observation. Link to comment Share on other sites More sharing options...
tommy1 Posted September 1, 2019 Share Posted September 1, 2019 On 8/28/2019 at 7:18 AM, DG1949 said: Pretty much across the board with all DBXs and any kind of view other than plan view. It may have nothing to do with Chief, but whatever it might be, it coincided with the last update. No crashes or hangs; just some slowdown. I'll be interested to hear your observation. The only slow down I've noticed is placing electrical items. There's about a 4 to 5 second delay when placing. Nothing else is slower. Link to comment Share on other sites More sharing options...
DRAWZILLA Posted September 1, 2019 Share Posted September 1, 2019 I was experiencing periodically slowdowns but only sometimes, and I'm sure it wasn't chief, and what do you know had a windows update this morning and it's gone.. 1 Link to comment Share on other sites More sharing options...
PamelaMellon Posted September 7, 2019 Share Posted September 7, 2019 X11 crashes when placing imported models for specific lighting fixtures ( mostly) and materials. Not often, but enough to keep me mindful to save save save files in the progress. 1 Link to comment Share on other sites More sharing options...
idesign7 Posted September 7, 2019 Share Posted September 7, 2019 I've had the same issues. Crashed every time I tried to place in imported light symbol fixture Link to comment Share on other sites More sharing options...
Chopsaw Posted September 7, 2019 Share Posted September 7, 2019 32 minutes ago, PamelaMellon said: X11 crashes when placing imported models for specific lighting fixtures ( mostly) and materials. 7 minutes ago, idesign7 said: I've had the same issues. Crashed every time I tried to place in imported light symbol fixture Please be sure to send those in to tech support so that they can figure out what the issue is and get it fixed. Link to comment Share on other sites More sharing options...
tommy1 Posted September 7, 2019 Share Posted September 7, 2019 Sounds like a lot of electrical issues. Thankfully no crashes. I probably shouldn't say that though. Link to comment Share on other sites More sharing options...
Michael_Gia Posted September 8, 2019 Share Posted September 8, 2019 Printing has become a real pain since the update. Program crashes midway during a print either PDF or printer. These are the only issues I have. I’ve resorted to snapping screenshots instead. On the plus side the “undo” function is much quicker. Anyone else experience this? Link to comment Share on other sites More sharing options...
Chopsaw Posted September 8, 2019 Share Posted September 8, 2019 1 minute ago, Michael_Gia said: Printing has become a real pain since the update. Program crashes midway during a print either PDF or printer. Any chance your scale got corrupted ? Link to comment Share on other sites More sharing options...
Michael_Gia Posted September 8, 2019 Share Posted September 8, 2019 11 minutes ago, Chopsaw said: Any chance your scale got corrupted ? What does that mean? Link to comment Share on other sites More sharing options...
Chopsaw Posted September 8, 2019 Share Posted September 8, 2019 1 hour ago, Michael_Gia said: What does that mean? If your scale is messed up like I have done by accident a few times when I have been in a rush. You will run out of memory trying to plot out several acres of paper or even worse maybe a multiple of the actual size. Link to comment Share on other sites More sharing options...
Chopsaw Posted September 8, 2019 Share Posted September 8, 2019 1 hour ago, Michael_Gia said: Program crashes midway during a print either PDF or printer. Does the program shut down or just hang in an unresponsive mode such that you need to shut it down with task manger ? Link to comment Share on other sites More sharing options...
Michael_Gia Posted September 9, 2019 Share Posted September 9, 2019 On 9/7/2019 at 10:01 PM, Chopsaw said: Does the program shut down or just hang in an unresponsive mode such that you need to shut it down with task manger ? The program shuts down completely. (Sorry for delayed response) Link to comment Share on other sites More sharing options...
Chopsaw Posted September 10, 2019 Share Posted September 10, 2019 6 hours ago, Michael_Gia said: The program shuts down completely. (Sorry for delayed response) Sounds like something tech support should know about but would be glad to try printing one of your files if you think that might help. 1 Link to comment Share on other sites More sharing options...
Michael_Gia Posted September 11, 2019 Share Posted September 11, 2019 Ok, the problem fixed itself. (for anyone having the same issues) It seems the recent MacOs update needed to get through a few days of rebooting to sort things out. I upgraded Chief on the same day as a MacOs update, so that apparently is a bad idea... Although I wasn't having printing issues with other programs. All good now, but I was sure cursing Chief over the last few days. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now