Michael_Gia

Are you guys not required to have a centre garage pit for drainage?

Chief should eventually develop a curtain wall tool. Parametric.

We had sneak peeks of X13 last May. Beginning of May, I think. So, you might have to wait a couple more weeks. If I think back it seems that the even numbered releases were more stable but underwhelming in new features.

Maybe oversimplifying but this is all you need…

What passes are you talking about? I don’t have a card to perform RTRT but it sounds like you are referring to a RayTrace. Correct me if I’m wrong.

Floor too shiny and counter not shiny enough. Otherwise, bravo.

What year is this?…

By going to Chief Architect website and entering in "stepped wall foundations" in the search bar... https://www.chiefarchitect.com/videos/watch/402/stepped-foundation.html?playlist=88

I think for driveways like this, another approach is needed. Use a terrain feature to cut a hole out for the space occupied by the driveway. Then, use a combination of ramps and solid tools to precisely create your sloping driveway. Your textures and fills will also behave as expected (which is actually the least of your problems based on the image) This will give you better information in a cross section for you to relate to the guys who will be doing the work.

Ah yes, the old section and elevation view blues. At this point someone should just write a song. …and it’s getting worse with each version.

Something looks a lot more wrong than just wall connection issue. Post the plan so someone smart can help. I’m also curious about your suggestion regarding putting all layers on main layer. Can’t be a good idea. But if it is then I’d like to know as well.

I’ll do it for 1.4M but hire Rob to do the work

Make 2 walls? One just for your 3” brick veneer which you could split into a pony wall showing your brick below and your siding above? Sounds scary but it does work. Just make sure your outer wall is “no room definition”.

Not sure exactly what you’re after, but do you know that you can create shapes with a polyline then convert those shapes into either roads or sidewalks and then use the union, intersection and subtraction tools to pretty much make and join anything you want out of your roads and sidewalks? Also try breaking your sidewalk at a point and then use the alternate behaviour, ctrl + click or right click and drag the end of your sidewalks to create the curve you want. I find it easier to make the intricate parts with polylines and then convert them to roads or sidewalks, and then join them with the main, “easier” sections of your roads etc…

Do yourself a favour and seek out some coaching from guys on this forum. You’d be surprised at how much you can learn in just a one hour session, especially if you’re focussing on something like rendering tips.

He’s appealing to French language users in his region, obviously. Why would you even respond if you don’t speak French? You Americans are too funny.

I thoroughly enjoyed that. I hope to see more. Great channel, by the way.

Why isn’t this Q&A the de facto feature request? We don’t have that many posts per day. Whoever’s job it is at Chief to look at the “feature request” should just simply come here. Alternatively I could name 5 guys on this forum that could streamline the feature request and give you the greatest insight as to the program’s deficiencies. They’re good guys and willing to help. Just give them SSA for free or something? Unless the feature request at Chief is just a big waste of time and there just so we can vent our frustrations and simple give the illusion that Chief is actually considering any of the requests?

Below is a screen shot of a plan I'm working on that has a lot of 45 degree angle sections. I can rotate the plan view by 45 degrees so now It's more comfortable to look at an orthogonal drawing but my selection (yellow rectangle) is still at the original angle of 0 degrees. (the room labels are in the default plan orientation, that's why they appear at 45 degree angles to my rotated plan view) Does this tool still not work as intended? I mean, I would think that if I rotate a plan view I might also want to drawn and select objects in that new orientation, wouldn't I?

I thought the 3060 did not support real-time ray tracing? Don’t you need at least the 3070? Apple guy, so I’m confused. I’ve been a lurker though, ever since rtrt came out in X13 and TwinMotion.

Not a software engineer, but I assume the relationship between a Layout File and a Publishing Set would be a two-way street, where the layout file sends the most current and up to date sheet to the publishing set and the publishing set sends back info as to what page those sheets are on. end loop?…haha. There, I just wrote the sub program.

Yes that was a great post, to which I gave an upvote to as well as all your other posts on this topic… Another solution could be a “temporarily hide/show layer” button. This option would not change the layer set. This is what I was always hoping the little “Object Layer Properties” on the bottom toolbar button would morph into.

Actually, there should be a separate “Publishing Set” in the project browser. You would drag the pages you want to print into a Publishing Set, give it a name like “Engineers Copy” and print that set. This way you can have multiple sets going out to different people that all pull from you Layout Set and be updated live as you make changes. Then you could batch print different sets at the same time. Example, Engineer Sets, Client Set, City Set. (I stole this from another software which I will not mention because it annoys people]

This is my point, the 3 options of “prompt to save, always save, never save” are not adding much to our workflow. There’s really only 2 options in effect. If you turn off windows, for example, in any one of these modes the result is the same. You close the SPV and reopen it with no warning and your windows are turned off. What is the point of these 3 modes with regard to layer sets? By the way, I pretty much have the same workflow as you described, that is, different layer sets per SPV that go to the layout. That’s from when Anno Sets ruled the roost.

I use %numpages% this gives number of printed pages. example: %page% of %numpages% (but check “use as page template” in the Layout Page Specification DBX for whatever pages you don’t want to print. Not sure if it’s the best way but it works. As for Layout Page Table just check or uncheck that option for the page in question while you’re in the same Layout Page Specification DBX.