Kbird1

Just like in the Real world --- build the curved Walls 1st - those you can set the Radius for in Chief, (no curved wall in your plan? then just delete it when done) , as the curved Stairs will snap to the curved Wall , they also snap pretty well to a CAD ARC

Did you try the Clone ( not Image) using the MR Rescue Disk/USB ? ( no windows 10 running then ) make sure you run the FixBoot off the menu when Clone is done and make sure it picks the 980 Drive not the 850. Then reboot , power off Computer immediately, unplug power cable too 850 SSD, reboot, go into Bios and make sure the Boot option is set to Windows Manager and it says 980 Pro ( or similar ) , save and reboot,..... into Windows..... Once up and running again you can close it down and plug the 850 power back in, and reboot , then you can go ahead and Format the 850 and use it as a Data Drive to run MR backups too for example ( much quicker than to a HDD backup). Always nice to do a Clean Install but can be a bit of Work...... but the holidays are coming.... Mick.

No Problem you could try Samsung's own Software but I've always had more luck with MR https://www.samsung.com/semiconductor/minisite/ssd/download/consumer/ If you are on Win 11 try MR 8 instead of a MR7 version.... Mick.

Also see if this tech article helps...3rd Section shows how to make your own Toolbar : https://www.chiefarchitect.com/support/article/KB-00811/customizing-toolbars.html

It appears you have the Gamepad enabled in CA , but maybe don't have one attached?

David is right it is the Brick Ledge , do a Floor Overview Camera while on level 0 and you should be able to see it. M.

Thanks Yusef, you seem to have a way to make CA do things it thinks it can't M.

I'd need more details Larry perhaps PM me..... M.

Without the plan , the only suggestion I can think of is make sure the Front Wall ( red scribbly line in pic) is not 1 wall break it at the Garage if needed and set it to Hip. M.

It sounds like you were not in the Plot Plan Saved Plan View (SPV) when you drew the SB Line, as it would of been placed on CAD, Plot Plan automatically... remember to switch Disciplines' as needed on the SPV Menu, same as you would switch to the Electrical SPV before doing Electrical Work

Nice find .............that is a looong way from home..... So the issue maybe a really big Plan Area, rather than just a Large Terrain Perimeter then.... Probably worth Reporting to Tech Support still as that still shouldn't happen.... M.

That thread may explain it as I just about always "Clip to Sides" as Robert suggested, not 100% sure this is Scott's issue though? though it maybe also that I don't frequently send Color to layout. I have not seen a lot of Posts on this issue which is a bit surprising and maybe why Chief hasn't fixed it (not enough reports to get high on the list) https://chieftalk.chiefarchitect.com/topic/32422-color-fill-issue-in-layout/?do=findComment&comment=254794 M.

Isn't that always? maybe I am missing something? as I have not seen this issue , and was thinking it was a MAC thing but I guess not if you see it? M.

Yep nice Image as usual , but perhaps they lost something in the latest Update last week? ( I assume second pic is from an earlier version? ) Mick

True, it just another of those Time wasting things, that I personally think we should have control of in the Premier product..... I understand it in the Consumer software which is used mostly by HomeOwners, but not in Professional Software, with Users world wide, with Different Codes being applicable everywhere. Personally I would never want a 6 3/4" Riser so I am not sure why we are hardcoded to 17 treads ...or where Chief got 17 from for the hardcoding? M.

It is my experience that the 17 treads is hard coded too , I tried changing it to 16 ( to get 7 1/4" +/- Risers default ) but the Program always switches it back to 17, so I have to open and change it anyway.... not sure if this is related to no default Riser being able to be spec'd.....the Tread Depth seems to hold though..... Default New stair in Plan Mick.

Well this is a new one , I shot a backclipped camera , whole screen went black as Elev. opened and has stayed black, moving the camera did not help, so I saved the camera as a test and finally the elevation view came up..... This was in a clean plan from the default residential Template.... M.

My guess is your HD ARCH. Software does not have full editing rights in a full CA Premier file..... still strange you can't delete something. M.

Using you iPhone were you Are you saying stuff is shifting when you print to PDF? , ( going from Chopsaw's post....) I do see the shift now in the PDF..... yesterday I was looking for "Shadows" , not CAD Lines with a 3' offset.... One for TS for sure ...I have not seen that personally but am on a PC. M.

Not sure what you are seeing I am not Scott ? Tech. Support is done through your Digital Locker.... https://www.chiefarchitect.com/

Could be a bad something in the Library , you could test it by backing up your User Library ( Export it ) , then remove the User Library File and and let Chief remake the user library , next time it starts and see if it helps..... more info on User Library backups here : https://www.chiefarchitect.com/support/article/KB-00001/backing-up-chief-architect-content.html I am still getting the odd crash in 3D in Old Plans brought FWD into X13 , but am now mostly working on X13 Files. M.

Note that I am aware of , you can use Paint though.... short tutorial I made for tile last year: https://chieftalk.chiefarchitect.com/topic/24813-how-to-make-a-screen-grab-of-a-tile-into-a-tile-material-in-chief /?tab=comments#comment-200824

Not sure about the Warranties these days, (one reason to go Pro - 5 vs 3yr ) but I have not had any issues with any of my Samsung Evo 970's or 970 Evo+ models (500,1TB and 2TB) over the last 5-6 years. Might be some good deals on a 2TB if you wait for B.Friday? Amazon had a big sale on them last yr for BF or Xmas , so I grabbed a 2TB. M.

I switched to 472.47 Studio Drivers but the Issue persists for me 462.35 is a release from Windows Update? or perhaps your Laptop ManF. issued a OEM version with it ? I don't see it at Nvidia even for Laptops https://www.nvidia.com/Download/Find.aspx?lang=en-us M.

No , once Cloned everything is on the NVME instead , you then wipe the SSD and start using it for a DATA Drive for things not accessed often or need the speed of the NVME , which is pretty simple by relocating the Windows "Libraries" , which also removes most of the "hassle" you envision as Windows places the Files on D:\ but links to them just like before. Of course if budget is not an issue get the 2TB and still use the SSD as a DATA Drive, for example all things Chief/Biz. or put it in an enclosure to use as a fast USB3 external, I like and use the MediaSonic HDR-SU3 enclosure , all aluminum and up and running 5 mins after you open the box. I also highly recommend Macrium , I also use it to make Full image backups every 3 days to an Internal HDD. M.