robdyck Posted April 25, 2020 Share Posted April 25, 2020 Has anyone figured out the secret sauce to smear on a flush eave? What the heck is up with these things? The roof produces soffit material and wall surface material in the same place. And I was gonna go the whole day without cussin...it's every single one on every house. Link to comment Share on other sites More sharing options...
DzinEye Posted April 25, 2020 Share Posted April 25, 2020 You're throwing me for a loop Robert... you're saying 'flush eave', but you're showing an overhang? 1 Link to comment Share on other sites More sharing options...
Ridge_Runner Posted April 25, 2020 Share Posted April 25, 2020 The flush eave back at the gable wall intersection. Link to comment Share on other sites More sharing options...
DzinEye Posted April 25, 2020 Share Posted April 25, 2020 7 hours ago, Ridge_Runner said: The flush eave back at the gable wall intersection. Flush eave? There's a gable overhang and an eave overhang. It seems it's finishing the end of the soffit that's being talked about? This... ? I guess they do call it a flush eave on the dbx setting, but that just seems odd to me. To me a flush eave means no overhang. Anyway... I've got no problems with it. Link to comment Share on other sites More sharing options...
Ridge_Runner Posted April 26, 2020 Share Posted April 26, 2020 10 hours ago, robdyck said: The roof produces soffit material and wall surface material in the same place. Robert says his is producing two materials, not just the siding. Hard to tell from his camera angle. Link to comment Share on other sites More sharing options...
robdyck Posted April 26, 2020 Author Share Posted April 26, 2020 10 hours ago, Ridge_Runner said: Robert says his is producing two materials, not just the siding. Hard to tell from his camera angle. Wall siding material: White board&batten siding Soffit material: black aluminum soffit These 2 material are in the same place so they're z-fighting. Messes up the 3d views and the elevation views. In elevation view it displays patterns for both materials: the vertical pattern of the siding and the horizontal pattern of the soffit. So that creates a lot of clean up in layout or a cad mask in elevation. The same happens in 3d...patterns and material colors z-fighting Link to comment Share on other sites More sharing options...
DavidJPotter Posted April 26, 2020 Share Posted April 26, 2020 What settings are you using in the "Build Roof" dialog "Overhang"? I am not getting the results you are getting in my X12. DJP Link to comment Share on other sites More sharing options...
joey_martin Posted April 26, 2020 Share Posted April 26, 2020 I also can't replicate it. Do you have Autoroofs on? I do for this. Link to comment Share on other sites More sharing options...
rgardner Posted April 26, 2020 Share Posted April 26, 2020 It almost looks like the Frieze board trim may be causing the issue in the first pic... Is the settings for it normal? Link to comment Share on other sites More sharing options...
robdyck Posted April 27, 2020 Author Share Posted April 27, 2020 21 hours ago, joey_martin said: I also can't replicate it. Do you have Autoroofs on? I do for this. No to Autoroofs. Link to comment Share on other sites More sharing options...
robdyck Posted April 27, 2020 Author Share Posted April 27, 2020 21 hours ago, rgardner said: It almost looks like the Frieze board trim may be causing the issue in the first pic... Is the settings for it normal? It's just a 1x4 molding, eave & gable, no offsets Link to comment Share on other sites More sharing options...
robdyck Posted April 27, 2020 Author Share Posted April 27, 2020 22 hours ago, DavidJPotter said: What settings are you using in the "Build Roof" dialog "Overhang"? I am not getting the results you are getting in my X12. 24" & 24". That matches with what's been used on most of the building. There are a few sections with shorter overhangs, like shed dormers. The flush eaves wouldn't work on those either. I got a flush eave on one side, and a boxed eave on the other so I just turned off boxed eaves for those roof planes. Link to comment Share on other sites More sharing options...
DzinEye Posted April 27, 2020 Share Posted April 27, 2020 You got me.. I messed around a bit. Interestingly after toggling boxed eaves on and off and futzing around a bit the z-fighting problem went away on the left side of the roof (main structure)... but it finished the flush eave with the soffit material instead of the wall material. Then undoing and redoing a few steps and the problem came back. Some weird behavior. Sorry.. beyond my ability Link to comment Share on other sites More sharing options...
DzinEye Posted April 27, 2020 Share Posted April 27, 2020 FWIW, This is what I got... Link to comment Share on other sites More sharing options...
robdyck Posted April 27, 2020 Author Share Posted April 27, 2020 58 minutes ago, DzinEye said: FWIW, This is what I got... Thanks for taking a stab at it! I don't think I can say I've ever had these generate reliably. Often, I've used a triangle p-solid drawn in elevation view, because it blends with the wall surface material and doesn't generate any BS lines to remove in layout. And then another solid for the soffit. Link to comment Share on other sites More sharing options...
LevisL Posted April 27, 2020 Share Posted April 27, 2020 Rob, The problem stems from your wall definition. You don't have a sheathing layer, just a single exterior layer. If you split up the 1 1/2" board and batten layer into 2 layers, say, 1 1/8" board & batten and 3/8" OSB, the z-fighting disappears. Seems odd that those 2 things would be related though... might want to report that to Chief. 1 1 Link to comment Share on other sites More sharing options...
robdyck Posted April 27, 2020 Author Share Posted April 27, 2020 1 hour ago, LevisL said: Rob, The problem stems from your wall definition. You don't have a sheathing layer, just a single exterior layer. If you split up the 1 1/2" board and batten layer into 2 layers, say, 1 1/8" board & batten and 3/8" OSB, the z-fighting disappears. Seems odd that those 2 things would be related though... might want to report that to Chief. Well that seems messed up but apparently the secret sauce for a flush eave needs to be spread on at least 2 layers thick to be sweet and tasty! I added a 2nd exterior layer (housewrap / 0 thickness) and that did the trick. I was working on another plan and I was thinking about trying the same thing...adding a sheathing layer. I bet that weird wall assembly must have had you wondering...It's an existing building that has the 2nd floor balloon framed against a 15' tall fir wall. So the plan is to add a knee wall on top of the existing fir wall and, for vertical reinforcement of the hinge connection, a new framed wall inside of that at 97 1/8" tall. All engineer verified, of course. Link to comment Share on other sites More sharing options...
DzinEye Posted April 28, 2020 Share Posted April 28, 2020 2 hours ago, LevisL said: Rob, The problem stems from your wall definition. You don't have a sheathing layer, just a single exterior layer. If you split up the 1 1/2" board and batten layer into 2 layers, say, 1 1/8" board & batten and 3/8" OSB, the z-fighting disappears. Seems odd that those 2 things would be related though... might want to report that to Chief. Nice catch Levis. I tried changing the wall material thinking it might be something to do with the wall, but didn't think number of layers would be the issue. Very interesting. Link to comment Share on other sites More sharing options...
LevisL Posted April 28, 2020 Share Posted April 28, 2020 2 hours ago, robdyck said: I bet that weird wall assembly must have had you wondering...It's an existing building that has the 2nd floor balloon framed against a 15' tall fir wall. So the plan is to add a knee wall on top of the existing fir wall and, for vertical reinforcement of the hinge connection, a new framed wall inside of that at 97 1/8" tall. All engineer verified, of course. At first glance I found it odd that you had double walls on the second floor, but not the main floor. I figured it out pretty quick when I checked the wall type definition! No further questions... you do what you have to do with renos. There’s some weird stuff built out there, especially some of those farmer builds!!! 1 hour ago, DzinEye said: Nice catch Levis. I tried changing the wall material thinking it might be something to do with the wall, but didn't think number of layers would be the issue. Very interesting. When I was first looking for the issue, I was comparing roof settings with one of my own plans. Nothing stood out there. Then I checked attic walls. Still no fix. Then raising the roof. Nothing. Then I focused on the double walls on the second floor. At first, I moved the outer framing layer up to make it an exterior layer. That solved the flush eaves problem, but created a whole bunch of other issues! So I just split the exterior layer into sheathing and siding and that was the trick. Link to comment Share on other sites More sharing options...
AvoyeDesign Posted April 28, 2020 Share Posted April 28, 2020 I've always found this feature to be buggy. There are times I get no wall fill or times where chief generates a porkchop when it is clearly selected as flush eave. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now