DRAWZILLA

got a picture or post the plan with the camera in question labeled.

I say Scott is correct and just leave it at that

remember you can cut the section line and move it to wherever you want

plot lines-no color fill

It really is all about the money isn't it. sad but true. learned that many many years ago and everything is about the money.

It's a wall, use the back clipped cross section and do not locate through the wall

I never use view to cad for elevations, try sending it live from the section elevation view. This way when you have changes it's automatic. You can also use line weights to make it pop.

I haven't had that problem in X8 or X9. Could be a model problem, and can't be your computer unless Chief doesn't like Zeon's.

From lib. straight to the layout, but no scale, which is ok for me, I really don't want anyone scaling the details anyway. I have most of my typical details already on my layout template so send it once , never do it again. Any oddball details are in the lib ready to go or revise. If a detail needs to change permanently I just open it on a new plan, change it and re-save it, and delete the plan. This way it doesn't globally change the detail on every plan you have done in the past.

As for the delay or fading, I have turned off "Edge smoothing when idol" and I now don't get that anymore. I think it depends on your system weather you need it or not.

My lib. saved details are very easy to locate b/c I have them sorted in folders like Joe but they are not in any Cad detail windows.

I have been trying Room Planner and the problem is "Notes" I need to make lots of notes and room planner just doesn't cut it, they make it too hard for noting. First you have to paste a note then change it, too many steps. It's just not good for that. Room Planner will also take you longer than pencil and paper, instead of hand drawing a door or window, you have to paste it in then adjust the sizes of them. For the measuring part it works great, it's just all the other stuff that goes along with measuring it. For now, I'll keep trying maybe I'll get better at it. Ps Room Planner doesn't have anything for outside measurements, that's another problem.

I never put any cad details in the plan file, they should be put on a Cad detail box, separate plan file or the layout. I keep mine in the lib. and have hundreds there. Cad in the plan file will slow it down.

if you turn off the layer "Ceiling break lines" they won't show, it a line automatically created when the roof plane goes lower than the ceiling plate line. Because you have soffits at the ceiling , you won't see it in 3d.

Yep Michael is correct, if you print in grayscale the lighter colors will print light, so keep your colors on the darker side. You will have to experiment for yourself to see what works for you. If you print in black and white then color doesn't matter. I print in grayscale and always have, I like the different gray types. Plan looks good especially when using different line widths for window, doors wall fills, roofs, etc.

I always print to PDF, then to the print service, never had that problem. I use the 1/100mm as standard but I have all my line weights set in the layer-set that is sent to the layout. I use line-weights from 12 to 200 depending on what it is. I set up my line-weights many many years ago and haven't touched them ever since.

We have been wanting this for a zillion years, and the materials list just won't be correct until it is.

I never turn off auto floor and ceiling framing unless I have to make any manual framing changes, then I will turn it off, but hate doing it. I try to keep all framing live if possible.

There you go Scott Hall, let them pay your taxes.

Good luck with whatever you ,do but always come back and see us.

open the DBX and set its top height or just drag it in elevation view and make sure the layer is on for that object.

The jokester is at it again.

If you use the SAM method, it's already there for you.

Manually, conventional framed areas will not build over or under a truss roof automatically. Even the overhang won't frame where the 1st floor is trusses and the 2nd is stick build. trusses below causes it not to frame.

I have heard of lots of others using Chief on the surface