BlissBunny Posted December 10, 2022 Share Posted December 10, 2022 Hello! as tiles are going very large format, and you let me know the solution for not having huge grout lines when going up to 24x48? It wasn't clear how to do this. Thank you! Link to comment Share on other sites More sharing options...
CADustin Posted December 13, 2022 Share Posted December 13, 2022 On 12/9/2022 at 5:15 PM, BlissBunny said: Hello! as tiles are going very large format, and you let me know the solution for not having huge grout lines when going up to 24x48? It wasn't clear how to do this. Thank you! Sure thing, the secret to get thinner grout lines is to increase the image resolution from 512x512 to something larger. As you can see, the grout gets smaller and smaller as I increase the resolution on the image. 1 1 Link to comment Share on other sites More sharing options...
JeffFlansburg Posted December 19, 2022 Share Posted December 19, 2022 I'd like to be able to have a wood pattern with 1.5" cuts - for simulation of glu lam beams. What would be the possibilities of having a Douglas Fir Wood Species and 1.5" Strip for the cut in the Wood Builder Beta? Link to comment Share on other sites More sharing options...
CADustin Posted December 20, 2022 Share Posted December 20, 2022 Morning Jeff, I'll make sure Douglas Fir is on the todo list but until then, you can get your 1.5" cuts with the builder by adjusting your scale in Chief. Since it's just an image getting spat out of the builders, there's no real way for me to control the size you make your boards so to get your 1.5" cut glulam... -Make your wood pattern using the 1" strip the color and species you want, I'd bump it to 1024x1024 as well. -Just export the "Base Color" image since we won't need any maps since we want the glulam to look like it's been sanded smooth. -Make a material with your image in Chief and count the number of boards in the image (it's 36 for the 1" strip) and set your scale in chief to be the number of boards * 1.5" (36*1.5= 54") -Rotate Material if necessary... Hit me up if you run into any snags. 1 1 Link to comment Share on other sites More sharing options...
RobUSMC Posted February 25, 2023 Share Posted February 25, 2023 It would be nice for all of use to create a thread to share any tile, wood, etc.. materials we've made in SP. I'm sure a lot of users could use and benefit from those materials and it only takes a few seconds to export and upload here. Absolutely some will be better than others but that with anything in life. I will create a new thread now in the Symbols forum titled Shared Substance Player Materials. 1 Link to comment Share on other sites More sharing options...
BloomingDaisy Posted March 14, 2023 Share Posted March 14, 2023 Can't find the tile builder anymore to use with Substance Player. Found a video that shows making different tiles would be pretty easy, except the tile builder is no longer available. Any help with this would be appreciated. Thanks! Link to comment Share on other sites More sharing options...
gelbuilding Posted March 14, 2023 Share Posted March 14, 2023 Everything is on the first page of this thread. Link to comment Share on other sites More sharing options...
BloomingDaisy Posted March 14, 2023 Share Posted March 14, 2023 Okay, I am definitely not one to ask for help w/o researching myself to death... and I can honestly say at first it said no file available, even when trying to click on it, went to a blank screen and said no longer available... ovey! Well, at least I have it now... THANKS! Link to comment Share on other sites More sharing options...
Renerabbitt Posted March 16, 2023 Share Posted March 16, 2023 @CADustin Requesting a way to rotate image inputs in your builders...otherwise we have to rotate them in a 3rd party which most beginners won't do Link to comment Share on other sites More sharing options...
CADustin Posted March 20, 2023 Share Posted March 20, 2023 Sure thing. The wood builder already has one, I'll add it to the list for the other ones. Link to comment Share on other sites More sharing options...
Ange822 Posted March 31, 2023 Share Posted March 31, 2023 Good afternoon - Just coming across this thread now! Wow I have really been missing out on this great feature / program!! Any chance their will ever be be "builder" for stone façade / cultured stone type of materials? I know Chief already has some manufacturer catalogs with quite a variety but sometimes it is hard to find exactly is needed for a project. Link to comment Share on other sites More sharing options...
CADustin Posted April 4, 2023 Share Posted April 4, 2023 On 3/31/2023 at 11:34 AM, Ange822 said: Good afternoon - Just coming across this thread now! Wow I have really been missing out on this great feature / program!! Any chance their will ever be be "builder" for stone façade / cultured stone type of materials? I know Chief already has some manufacturer catalogs with quite a variety but sometimes it is hard to find exactly is needed for a project. There is a very good chance this will happen eventually, it's high on my personal list. The builders are just collections of materials I've made for other Chief catalogs, all bundled up together after I have enough of one type. So, eventually, after I've made enough stone materials, I'll be able to plug them into a builder and we'll be good to go. Glad you enjoy the tool! 1 Link to comment Share on other sites More sharing options...
Joe_Carrick Posted April 4, 2023 Share Posted April 4, 2023 Is there a set of materials for "System Pavers"? There's a variety of shapes, colors and arrangements of the shapes. Link to comment Share on other sites More sharing options...
CADustin Posted April 4, 2023 Share Posted April 4, 2023 Hey Joe, I'm pretty sure we reached out to these guys a couple times but still no bites yet. I'll put them back on the request list for you though. If it helps at all, I did add a Masonry and Stone builder recently at the top of this ChiefTalk thread. It's not specific to the system paver products but it IS a generic collection of paver options that might help you out. Link to comment Share on other sites More sharing options...
Kbird1 Posted April 5, 2023 Share Posted April 5, 2023 4 hours ago, CADustin said: Hey Joe, I'm pretty sure we reached out to there guys a couple times but still no bites yet. I'll put them back on the request list for you though. If it helps at all, I did add a Masonry and Stone builder recently at the top of this ChiefTalk thread. It's not specific to the system paver products but it IS a generic collection of paver options that might help you out. Techo Bloc already has a good SketchUp Texture Library and Patterns (AutoCad Hatches) available of their Products like Pavers, you should add them to your list to do a Full Chief Library with too, they already work with AutoCad, Dynascape, Pro Landscape and Structure Studios etc. It's just a suggestion of course https://www.techo-bloc.com/support/resources/technical-resources/designers-toolbox Mick. Link to comment Share on other sites More sharing options...
CADustin Posted April 5, 2023 Share Posted April 5, 2023 These guys are also on the list but we'll shoot them another e-mail as well. Also, as always, users asking for Chief-able catalogs carries a lot more weight than if we reach out so don't be shy about telling them what you want. Link to comment Share on other sites More sharing options...
SusanC Posted April 5, 2023 Share Posted April 5, 2023 22 minutes ago, CADustin said: These guys are also on the list but we'll shoot them another e-mail as well. Also, as always, users asking for Chief-able catalogs carries a lot more weight than if we reach out so don't be shy about telling them what you want. Thanks Dustin! Yes, the only way manufacturers get on board is to have many users contacting them for a 3d catalog to use in Chief and it can be a slow process to get their attention. However the reward is a catalog in Chief with models that work correctly, have all of the info embedded for schedules/material lists, and is updated and maintained by Chief. The link posted above discusses a few strategies for contacting manufacturers. There is also a new thread called New Manufacturer Catalogs for Chief: Email Contacts. Chief users can help out by sending a quick email or sharing an email contact for others to use. Susan 1 Link to comment Share on other sites More sharing options...
CADustin Posted June 22, 2023 Share Posted June 22, 2023 Small update to the tile builder, gang. You can get latest at the top of this thread, as per usual. -Added a new material selection "~Image Input RAW" that bypasses the color picker so you get the true color of whatever image you drop in. -All controls should work with this material type normally EXCEPT the color picker and the inverter control. -Feel free to post any problems you find here or e-mail me at dustin@chiefarchitect.com, this update is small but it has a lot of capability to get into a weird state. I think I got most of the oddballs but just in case, don't be shy if you find anything that needs fixin'. -Also tinkered with 1:1 Large Tile for better checkered tiling. -Various under the hood clean ups. 1 Link to comment Share on other sites More sharing options...
dskogg Posted September 28, 2023 Share Posted September 28, 2023 I am looking to do a terrazzo tile like this, any thoughts? when i import texture it spreads it across the entire tile view so it looses all detail. also do not want white grout, but blended to tile a bit. Link to comment Share on other sites More sharing options...
CADustin Posted October 2, 2023 Share Posted October 2, 2023 Yeah, the image input takes the image you give it and slices it up into the tile layout you select. I'm unable to make it remove the grout or add more surface area though so your best bet is to either find a better continuous image (counter tops work great for this kind of stuff) or edit the image via photoshop or something else to take out the grout. I'll also add "Terrazo Material" type to the todo list for next time. Link to comment Share on other sites More sharing options...
ericepv Posted October 12, 2023 Share Posted October 12, 2023 I've used Substance Player many times to produce high quality tile, stone and other images. I'd love to se a brick builder added to the mix. Link to comment Share on other sites More sharing options...
CADustin Posted October 26, 2023 Share Posted October 26, 2023 Glad to hear you use it, a brick builder is very much on my list of things to get done. The second I get a manufacturer catalog or a material update with brick assigned to me, I'll flesh one out and get it posted. 1 Link to comment Share on other sites More sharing options...
juliarias Posted February 28 Share Posted February 28 On 3/1/2019 at 1:55 PM, Chief_Content said: Our Content Development Team has been churning out new PBR friendly materials over the past few releases. These are materials that include a combination of Normal Maps, AO Maps, Roughness Maps, and Metal Maps. We use a software specifically designed to generate custom materials for 3D Rendering called Substance Designer. The program leverages parametric values to control sizing, colors, pattern, and other elements to generate unique tile-able texture maps along with automatically producing the other relevant maps need to create the effects that you expect to see in PBR (GPU Ray Trace) and CPU Ray Trace views. Our process includes generating individual materials then importing them into Chief Architect and distributing the catalogs that you download and use. This converts the parametric materials into static images that aren't as flexible as those that are created in the Substance Designer Program. Much like the Client Viewer and 3D Viewer products that are available for use with Chief Architect, Substance offers a product that allows others to leverage the parametric files to create their own custom materials... without needing to be an expert of the full-fledged program. We would like to invite you to try it out and create your own custom materials from the file we've set up for Tile. How does it work? First of all, a healthy understanding of how materials work inside of Chief Architect is a good starting point, and we just happen to have a couple primer videos ready for you here. Advanced Materials Creating Custom Materials and Colors Once you understand how Chief Architect behaves with different properties and maps, you can dig right in and make your own maps using Substance Player (a free download) and these source files we've set up to generate materials. Just download the Substance player from the link below and use it to open the builder SBSAR files you wish to work with. To assist, we have a quick video showing how to use Substance Player to get your custom maps into Chief Architect: How to use Substance Player in Chief Substance Player (Download) Chief_Architect_Tile_Builder.sbsar 97.32 kB · 312 downloads Chief_Architect_Wood_Builder.sbsar 237.12 kB · 125 downloads Chief_Architect_Masonry_and_Stone_Builder.sbsar 106.4 kB · 122 downloads Chief_Architect_Single_Color_Fabric.sbsar 486.23 kB · 86 downloads Chief_Architect_Multi_Color_Fabric.sbsar 474.49 kB · 91 downloads Chief_Architect_Ornament_Builder.sbsar 35.82 kB · 16 downloads We'd love to hear what you think. Is this useful? Are there other material types you'd like to try with the Substance Player tool? Voice any requests or questions here, or via e-mail to content@chiefarchitect.com . Chief Architect is not affiliated in any way with the Substance Designer or Substance Player software programs. Chief Architect will not be able to offer any support for the Substance software products or files. Using the program and files is completely voluntary. Substance compatible files are provided simply as a gesture, with no guarantees, extended to give access to more material options for those who are interested. Are these files available somewhere else? I need the tile builder but can not find it anywhere. Help Link to comment Share on other sites More sharing options...
Kbird1 Posted March 2 Share Posted March 2 On 2/28/2024 at 9:49 AM, juliarias said: Are these files available somewhere else? I need the tile builder but can not find it anywhere. Help Everything is in 1st post of this thread......... @CADustin M. Link to comment Share on other sites More sharing options...
CADustin Posted March 4 Share Posted March 4 Yup yup! Thanks for the heads up KBird. All the files should be on the first post of the thread. For the tile builder, you're looking for... Chief_Architect_Tile_Builder.sbsar If you see it and it says "Unavaiable" then you need to sign into ChiefTalk to enable file download. If you still can't find it, let me know and I'll investigate further. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now