Kbird1

Michael was just asking cos' They work on "Fixes" based on the number of bug reports , so the more reports the higher it goes on the List....

Good to know , not sure I have run into that issue.... I know there is an issue in elevation for cabinet hardware for example , unless it is somehow related to that? I have had to that recently myself to get outlines of Symbols properly in elevation.... M.

I think it is just that you have such long names for some Layers , annotations etc which caused all the drop downs to changes sizes as my Toolbars weren't locked, I just haven't seen it so dramatic before M.

you skim reading again Perhaps try a "Repair" from Control Panel>Programs and Features............. KB running the .msi file again will sometimes make the same offer too

a "Repair" didn't help then? M.

I would say report it , looks like a bug ...that wall layer is just an exact match to the main wall layer.... but should be 3/4" thick M.

same layerset in both views? backclipped view? M.

See if a Repair can fix it ...otherwise a full reinstall perhaps.... Folders all have Folders within? not empty eg

no corruption here CS. However there is more info ( Log) in your User Folder > AppData > Roaming CA X13 Help...and it looks like mine is having issues with Translations Info: HelpViewer log: "Wed Jul 14 19:16:47 2021" Debug: Application args: ("C:\\Program Files\\Chief Architect\\Chief Architect Premier X13\\Chief Architect Premier X13 Help.exe", "127.0.0.1", "61131", "file:///C:/ProgramData/Chief Architect Premier X13/Help/Default.htm", "-id=0") Warning: Installed Qt WebEngine locales directory not found at location C:/Program Files/Chief Architect/Chief Architect Premier X13/translations\qtwebengine_locales. Trying application directory... Warning: Qt WebEngine locales directory not found at location C:/Program Files/Chief Architect/Chief Architect Premier X13\qtwebengine_locales. Trying fallback directory... Translations MAY NOT not be correct. Info: Loading of URL ' QUrl("file:///C:/ProgramData/Chief Architect Premier X13/Help/Default.htm#cshid=0") ' finished successfully. *** Folder and File Do not exist , hence the logged error in my case --- only using english though.... Also more info in User Folder > AppData > Local > CA Inc > CA X13 Help > User Folder > AppData > Local > CA X13> CA X13 Help > Perhaps try a "Repair" from Control Panel>Programs and Features............. KB

I thought "Allow Low Roof Plans" was given to use to stop these Interactions with lower Roof planes but it is on in your Plan. I am not sure what is up with your Toolbars ( long custom names?) or why they effect my Toolbars in this Plan but this is weird too.... guess I forgot to lock my toolbars again sometime recently , thanks for the reminder Normal Your Plan

Someone Mentioned doing a Cad Detail from View and Copying it back into the Elevation , until it is fixed..... *found it finally but doesn't say much more.... https://chieftalk.chiefarchitect.com/topic/31321-new-computer-questions/?do=findComment&comment=246908

I think it is a Bug Larry , it seems like 2 different things depending...... (1) short trusses > is related to the wall on the lower level in the Garage that the Truss just happens to line up with it seems...... Draw a new truss 12' up or down in the plan and it seems to build ok for me....Playing a bit more and the truss either builds to the Ridge (1) or stops at the end of the Wall (2) ----used REF layer to see the wall below... (2) Playing a bit more again and the "Weird truss" seems to be trying to snap onto the front Entry wall it just happens to line up with, neither is right , so you should probably put it in.

www.pugetsystems.com I believe MarkMc just got a new Desktop from AXADirect - contact Kyle he told me he recommends them, and has ordered a 2nd system from them too....... but I built my Own. M.

You don't see 2 images in the post above yours with the RED Cylinder ? try this: https://chieftalk.chiefarchitect.com/topic/31348-pbr-w-realtime-ray-tracing-questions-in-x13/?do=findComment&comment=247266

You can see the Chevron wallpaper I used on the Wall, reflected on the Glass wall Camera side

yes used new file , see last post for pics it wouldn't let me add a few minutes ago.... Mick.

I think that Hack is working , the Red Hue reflected on the Wall Glass , just made it look like it wasn't there , similar to the Chevron I used here , but rasing the ceiling and looking over the glass ( 1/2 / 1/2 ) confirms it..... looks a bit strange though.... and it is "fuzzy" unlike the real mirror being Metal reflection.

Nope , I just didn't see any red in the Mirror , so swapped it back to Default and it went "grey" not beige as expected..... maybe I had wrong plan ? you have posted a few , I'll try again with Glass02..... Nope I don't have the Damask texture apparently let me try something else. Mick.

Not me personally , I think Rene is the only person I have seen here mention a EGPU but he is not using macOS AFAIK. @Renerabbitt

It's just a Shed Type Roof correct ? single slope? overframed on the old Roof, so build the Roof Plane 1st , then a Roof Beam should automatically follow the Slope of that plane. Mick.

For some reason the Wall behind the Camera is RED ? hence the "tint" in the Pics ..... Changing it back to default I still do not see a reflection as such ...of the Room like a Mirror ...... in fact the Mirror goes "gray" like in your bathroom once the Wall is the default material again - cam moved to side incase I was missing the room reflection with Refraction OFF in the RTRT technique DBX there is a reflection.....

I am not so sure about Shiny metal working ? I placed 2 normal mirror from my library either Side here Normal Mirror in your mirror ---- not work Either in your Frame or my Mirrors I made your Polyline Glass Wall material have Mirror Properties and look what happens...wasn't expecting that..... I changed your Mirror back to mirror BTW not Shiny Metal.... but you can hardly see you "Glass Wall" now. Any chance you have a really old Mirror Material of Chief's? there is one that doesn't work in PBR at all or is you Mirror Material one of your Own too perhaps?

That's what I did above last night and it didn't work ? which is why I was wonder what you did or didn't do.... https://chieftalk.chiefarchitect.com/topic/31348-pbr-w-realtime-ray-tracing-questions-in-x13/?do=findComment&comment=247137 M.

This has been an ISSUE since we got PBR , 3 years ago? , so why do we still not have dedicated PBR Assets to Work with if that is the Type of Camera you know you will be working with ? I am not sure why the CPU Render was not removed in the Windows Version to be honest , there is no longer a need for it . It is also unfortunate that Chief will no longer work with outside Rendering Teams such as D5 who told me Chief won't allow them access to make a Plugin. M.

Yep exactly what I have done now too , now I know the Cause...... and also set the Background intensity to 500 in all Cameras. Did I miss you posting your original plan where is works for you ? as I can't make it work without one of the workarounds mentioned here same as Kevin. Or did I miss another Point ?