glennw

d dot, You can't be wrong if I agree with you! And in this case I agree with you. I may as well give you a reputation point.

You should be able to select the cabinet and change it's type from Angle Front to Left Radius End for the bottom one and Right Radius End for the top one. Your radiused custom counter top then needs adjustment. Is this what you are after?

Are you holding down the Alt key as you drag the end of the stairs around? Looks to me like you are dragging without the Alt key - the Alt+ drag curves the stairs instead of just rotating them. Or, you can select the stair and hold the right button down as you drag from the end of the stair.without using the Alt key.

Ah...Ron, you want the quick way. In that case use the Auto Shadow Line Joint tool which will divide up the panels to the exterior walls in one go.

Jared, 3D...3D View Defaults... Options panel...General Options...Auto Rebuild Walls/Floors/Ceilings

Yup, that's the one.

I did post a while back about using the Wall Material Region to do this. I have tried searching, but can't find the thread. There is a slim chance it may have been on the old forum. From memory, the method used the Wall Material Region with one No Material Layer set to Cut Finish Layers from Parent Object. Your main wall definition should have the outside layer set to the hardi-panel material. The Wall Material Region was then sized to the size of the recessed joints where it then cut away the hardi-panel.

Cait, The bad connections should be indicated by a circle, but you need to be on the correct floor. Have you checked all floors in your plan? You can fix ALL the connections in the plan by going Build...Walls...Fix Wall Connections. The Fix Wall Connections on the Edit toolbar only does one individual connection at a time.

My opinion is that the reputation points thing should be turned of. They are meaningless and of no value. This forum is to foster communication and help other users. I can see no purpose for "reputation" points. It especially erks me when I see users offering help and at the same time touting for reputation points for offering that help. We seemed to get by OK on the old forum without reputation points.

Bill, Room Planner can save to the cloud. Ray, For your client to save to the cloud for you to download it, I guess you need to give him your Chief account details (email and password). Or I guess you can just create a new account. Either way, I think you both need to use the same email address and password.

That is a threshold line automatically drawn with an external door. The only way I know of removing it would be to have an internal room type built outside the door. That could mean having a room defined with invisible walls, no floor, etc.

Ray, File...Import...Import Room Planner File. Login, select and download.

I think you two may be talking about different versions. It appears that Jim is using X5 , where the current cad layer displayed in the Layer Display dbx was not tied to that Layer Set - we were able to set the current cad layer in that dbx, but the current cad layer was not tied to that layer set. In X6, the auto detailing goes on the current cad layer, which can be any layer chosen before auto detailing. The Current Cad Layer for that annoset is used unless changed manually, in which case the annoset is changed to "Using Active Defaults" in lieu of the chosen or default annoset.

Have you had a play with the Link function in a text box. This would allow you to link to an external file from a text box. The way it works is that you could have a text box that says "NOTES" or something similar which links to an external spread sheet, or text document that stores all your information. When you select the text box and click the Follow Hyperlink icon on the Edit toolbar, the external document opens. .

Do you mean that you want zero degrees to be up and angles measured clockwise? If so, click the Number Style button at the bottom of a lot of dbx's. Select Quadrant Bearing or Azimith Bearing. Note that this setting only changes the appearance of the angles in dbx's - no angles displayed in the drawing.. If you want to change the angle format for a line with Show Length checked, you need to change the default setting at Defaults...Cad...General Cad...Display Line Angle As. Angular dimensions have their own setting in their dbx.

By default, the Esc key will cancel the current command and selection and make the previous command current. Another Esc will go back one more previous command...etc, up to 100 previous commands (is that enough?) If you look at the status bar it will indicate the current tool as you press Esc and cycle back through the command list There are separate tools for Next Command that cycles forward through the command list (default shortcut is Shift+Esc), and you can have separate commands for Cancel Selection and Previous Command by assigning hotkeys to those commands. These commands aren't on a menu and don't have toolbar buttons - they can only be used with hotkeys and the only commands that come with hotkeys already assigned are Cancel Selection/Previous command (Esc) and Next Command (Shift+Esc). For the others (Previous Command and Cancel Selection) you will have to assign your own hotkeys. I think you are out of luck with "select previous objects".

If you are using something like a Coronado stone that doesn't have a pattern associated with it, you can be a bit naughty and use a pattern from the Cultured Stone catalogue. You aren't restricted to the Chief patterns. I mean that you can use a Coronado texture and assign just the Cultured Stone pattern to that Coronado texture. Assign a Coronado stone material to your wall. You will get a stone texture in a Standard view, but just a plain color in vector view. In a 3D view, select the stone texture with the Adjust Material Definition tool (rainbow tool). Go to the Pattern panel...Pattern Source. Select Use Custom Pattern File. In the box below, Custom Pattern Options, Browse to the Cultured Stone folder in the Patterns folder and open it. You can now choose a Cultured Stone pattern and assign it to your Coronado stone texture.

I just had a play with this and you can do a lot with the Watercolor with Line Drawing on top. I assume that the watercolor mode uses the rendered (standard) view to start Generate a 3D rendered (standard) view. Open up the Rendering Technique Options dbx and turn ALL the options to zero and OK out. This means that you will essentially get a rendered view with straight lines, no overlap, etc. While still in the 3D view (or go back to an elevation if you prefer), you can use Adjust Material Definition (the rainbow tool) to change the Pattern size and Offset (or angle if you want) so that it coincides with the Texture. Or, you can go the other way and edit the Texture X&Y scale, Angle and Offset, so that it coincides with the Pattern. Either way, with a bit of trial and error, you can get the pattern and texture to match up as I did for the bricks in the attached pic. The first pic is a normal rendered view (Standard). The second one is a Watercolor with Line Drawing where I matched up the brick pattern with the texture. The third one I changed the roofing definition from an Area material (which doesn't have a pattern) to a Strip material and rotated it 90deg to get the lines on the roof to run the correct way. This is all very flexible and you can display the materials any way you want. You can even delete the brick texture and just have the pattern and brick color, as shown in the fourth picture. The fifth picture I thickened up the Line Thickness to 10. You should be able to get close to what you want using the above.

Gerry, I gotta agree with that. I can't see the problem with Chief's handling of the building pad. It allows flexibility. I know d dot gripes about the lack of auto conversion between the methods, but I find that once you decide which method to use, I never need to convert to another method. The auto pad option is just a down and dirty method of relating the structure to the terrain so that the structure isn't buried underground or floating in the stratosphere. Does it really matter where on the structure height is calculated - it is an approximation only - if you want more accuracy, don't use auto pad elevation. It only takes a few seconds to add a manual pad elevation and an elevation height. FYI in Oz, all levels are related to AHD (Australian Height Data) which is mean sea level in 1996. All my building pads and height information relate to AHD - this allows seamless comparison with situations like adjoining sites, etc. It would be easier to use manual heights in stead of auto pad height than to use multiple plans and symbols. I don't get the logic in that one.

The pad elevation is very flexible and can be used in 3 ways, but you need to pick a method before you start: 1. All levels relative to sea level (or absolute elevations). 2. All levels relative to zero floor level 3. All levels relative to an assumed datum. I think what d dot is asking for is an automatic conversion between the various methods.

So Lew, with your experience and in your opinion, is the topic of this thread a "workaround"?

No need for any workarounds or invisible walls. This can all be done with the Edit Wall Layer Intersections - that's what it's for. Lew, you need to be aware that even though a post claims to be a bug or workaround, it is not always the case.

JG, I am not sure from your diagram, what intersection you are talking about. Do you mean like this? Use the new Edit Wall Layer Intersections tool. It is made for this situation.

Kathleen, Try having a play with Preferences...Render...General Options...Zoom Using Field of View. You probably want to have that unchecked.

Gene, Are you talking about something like this? You can do thisby opening the window dbx. Treatments panel...Exterior Millwork Above Casing and picking a keystone from the library.