stevenyhof Posted April 3 Author Share Posted April 3 13 minutes ago, Kbird1 said: Auto framing can slow things down (especially if a Schedule is used?) as can Fills with huge numbers of CAD lines too. I do not have auto framing on, and rarely use framing. I think I did use framing on this house though if I remember correctly. Link to comment Share on other sites More sharing options...
stevenyhof Posted April 3 Author Share Posted April 3 10 minutes ago, Renerabbitt said: just had to use zoom and shared my screen..abysmal performance..glad I dont use that anymore, haha I checked out streamyard, but is it simple for non video conferencing people to connect on their end? Seems it needs to be done in a browser and depending on their devise, what browser is best to use. Have you run into any issues with that? Link to comment Share on other sites More sharing options...
Renerabbitt Posted April 3 Share Posted April 3 32 minutes ago, stevenyhof said: I checked out streamyard, but is it simple for non video conferencing people to connect on their end? Seems it needs to be done in a browser and depending on their devise, what browser is best to use. Have you run into any issues with that? it doesnt have some features of zom, but easy to work with and yes just runs through a browser and they keep adding features Link to comment Share on other sites More sharing options...
stevenyhof Posted April 3 Author Share Posted April 3 3 minutes ago, Renerabbitt said: it doesnt have some features of zom, but easy to work with and yes just runs through a browser and they keep adding features I don't use features. The client and I are talking and watching my screen and I point things out. I did get "Region to Share" - a small piece of software so you can show only a part of my screen - that is very nice. Zoom has that built in, but most do not. Outside of that, I do not use drawing tools, etc. So it can be a very simple system. Link to comment Share on other sites More sharing options...
stevenyhof Posted April 4 Author Share Posted April 4 On 4/1/2024 at 10:02 AM, robdyck said: All the window panes are intact...shouldn't some be broken and others very dirty?! Just kidding of course, what you've done with that image is pretty amazing! So, what you think of this broken glass? About 10 mins work just to see how it may look Link to comment Share on other sites More sharing options...
SHCanada2 Posted April 4 Share Posted April 4 need it on a non covered wall to see it better Link to comment Share on other sites More sharing options...
stevenyhof Posted April 4 Author Share Posted April 4 On 4/4/2024 at 6:11 PM, SHCanada2 said: need it on a non covered wall to see it better Its not very nice in the window. I just wanted to figure it out. The window is insulated air to blank out the glass and the broken glass are solids turned into glass. If you put the sunlight on the floor the glass turns black and unimpressive. Link to comment Share on other sites More sharing options...
Rich_Winsor Posted April 6 Share Posted April 6 On 4/4/2024 at 1:55 PM, stevenyhof said: So, what you think of this broken glass? Like Jason said it's a little hard to see what's going on. The glass on the porch floor looks better than the glass that is/is not in the window. I think it will look better if the individual panes are broken rather than a big section of the glass missing across multiple panes. Be sure to add some spiderwebs and cobwebs in the corners of some of the panes. Your textures are looking great except that the grain is running the wrong way on the horizontal window muntins. (hate when that happens) Keep up the good work! Really like what you are doing by trying to get the best possible output from the tools Chief supplies instead of just telling everyone to use some different software programs for renderings. I had to go back to X6 to find this broken window I had a play with. As I recall I set the window glass to no material and made the broken pane from a thin 3D solid set to the standard glass material. Link to comment Share on other sites More sharing options...
stevenyhof Posted April 6 Author Share Posted April 6 6 hours ago, Rich_Winsor said: Keep up the good work! Thank you, Rich! I could make everything flawless if I wanted, but I mainly wanted to prove to myself and others that Chief has the tools to do a great job with rendering. Here is a modern home I drew and just completed the construction docs. Then I spent two hours making a rendering. Spent an hour just messing with backdrops, and lighting inside and out. One thing I am learning, and that is that with the simple method I am proposing at the start of this forum thread, a nice looking rendering can be done quit fast. But when you start to mess with photo backgrounds to attempt to make the whole image look real, the lighting and backdrop hue causes a very individualized camera experience. House designed by BD/DSGN Years old fake plants by Chief 1 Link to comment Share on other sites More sharing options...
para-CAD Posted April 9 Share Posted April 9 Amazing work, Steve. Thanks for all the work you have into this and for sharing! 1 2 Link to comment Share on other sites More sharing options...
stevenyhof Posted April 9 Author Share Posted April 9 29 minutes ago, para-CAD said: Amazing work, Steve. Thanks for all the work you have into this and for sharing! Thank you, Sir! It's been a lot of fun to learn rendering and now being able to do it within Chief. Link to comment Share on other sites More sharing options...
stevenyhof Posted May 30 Author Share Posted May 30 Rendering Materials and Libraries Update for X16... I am putting together the floor plans and now renderings for a condo project. I am posting this here because this is a continuation of the rendering method I proposed in the beginning of this thread. I am using this method to render some of my projects. I needed to put together 5 renderings, and while the first took about 90 minutes, the last two renderings were done in under 45 minutes. As you learn more about Terrain Features, using them to make driveways, sidewalks and landscaping beds, you can begin to set up defaults or parts that can be brought into your model that already have the materials and properties you end up using over and over. The Landscape Library has a few new trees (not Chief) and are larger in file size (Tree01 and Tree02). There are also a number of Hosta plants that are now available to use in X16. The library also has a number of the objects like Grunge, Grade (lawn plants and leaves) and Shadow trees (which I do not use. But if you have a smaller graphics card, they can help with rendering speed.) X16 now supports HDRi backdrop images. I am including a library of some images I put together. HDR08 is what I use now for the "Backdrop" image vs one I made for X15. HDRi images do a better job of creating tree and sky reflections in your windows. X16 Drawing Template I am also including my Template as it includes a number of cameras that you can copy and paste into your templates. https://drive.google.com/file/d/1YAeQKPG87YFoMC9O5Y0-QKWe5EWF_1tT/view?usp=sharing X16 Landscape Library https://drive.google.com/file/d/111cmp7Qe5UIKMqgmQ9rJ_fLWURjj_4eQ/view?usp=sharing X16 HDRi Backdrop Library (used for more realistic backdrops, or for window reflection as I am using them) https://drive.google.com/file/d/1EuUVvrhFGBC4eX5VG54TbrqtAF3dndk9/view?usp=sharing X16 Background Image Library (used for the background images you see in the rendering) https://drive.google.com/file/d/1UIMoHnTTF5t9gnd0F_OjR7d0rfcs5Pbl/view?usp=sharing See the beginning of this thread for rendering method... Thank you, Steve 2 4 Link to comment Share on other sites More sharing options...
MoeGia Posted July 9 Share Posted July 9 Steve, thank you for sharing your time and knowledge. Your work is beautiful and inspiring! Looks like I'll be spending some time on rendering today. Thanks to everyone else too! Lots of good information here. 1 Link to comment Share on other sites More sharing options...
CARMELHILL Posted July 15 Share Posted July 15 On 3/22/2024 at 11:43 AM, Kbird1 said: Xfrog has always had good vegetation but prices seem up these days......... https://www.xfrog.com/ What is the best format to order for importing into Chief so you don't spend hours remapping textures onto the imported tree? 1 Link to comment Share on other sites More sharing options...
Renerabbitt Posted July 15 Share Posted July 15 1 hour ago, CARMELHILL said: What is the best format to order for importing into Chief so you don't spend hours remapping textures onto the imported tree? man if youre trying to get better trees I'm gonna go ahead and mention my stuff as its optimized for chief:https://www.rabbittdesign.net/shop/p/low-poly-realistic-tree-and-plant-package-chief-architect-x-16-pre-order Link to comment Share on other sites More sharing options...
Kbird1 Posted July 16 Share Posted July 16 3 hours ago, CARMELHILL said: What is the best format to order for importing into Chief so you don't spend hours remapping textures onto the imported tree? I would ask them before buying, as I thought at one point they supported Chief directly, but that is likely quite a while ago now but I'd have thought .obj or .3ds should work other wise, but they may not support Chief new 3D Engine anymore? M. Link to comment Share on other sites More sharing options...
CARMELHILL Posted July 16 Share Posted July 16 16 hours ago, Renerabbitt said: man if youre trying to get better trees I'm gonna go ahead and mention my stuff as its optimized for chief:https://www.rabbittdesign.net/shop/p/low-poly-realistic-tree-and-plant-package-chief-architect-x-16-pre-order Thank you for the comment for buying Chief optimized trees. I don't have a clue, or the time, to buy and import trees from Xfrog that require mapping of textures....etc.... As soon as I clear some crap off my desk I'm going to check out your store, which I just looked at and it's amazing, and I'll be making some inquiries or immediate purchases. I don't get separately compensated for client renderings but I want to keep up with everyone else and provide some higher quality eye candy to the clients and it looks like your User Library is the way to go. I didn't know you have a virtual store until I hit your "Shop Link". Holy crap......very cool. 1 Link to comment Share on other sites More sharing options...
Renerabbitt Posted July 24 Share Posted July 24 On 7/16/2024 at 8:36 AM, CARMELHILL said: Thank you for the comment for buying Chief optimized trees. I don't have a clue, or the time, to buy and import trees from Xfrog that require mapping of textures....etc.... As soon as I clear some crap off my desk I'm going to check out your store, which I just looked at and it's amazing, and I'll be making some inquiries or immediate purchases. I don't get separately compensated for client renderings but I want to keep up with everyone else and provide some higher quality eye candy to the clients and it looks like your User Library is the way to go. I didn't know you have a virtual store until I hit your "Shop Link". Holy crap......very cool. Thanks again for this reaction. (I screen clipped and sent to my mom, she gets a kick out of reactions:)) here is Chief's "Timber Ridge" after I replaced materials and added my own plants and trees in the foreground. This is also an example of what @stevenyhofis talking about with the backdrop continuing the horizon line Link to comment Share on other sites More sharing options...
stevenyhof Posted July 24 Author Share Posted July 24 Beautiful house, Rene!! Link to comment Share on other sites More sharing options...
decorators3 Posted July 24 Share Posted July 24 On 5/30/2024 at 9:54 AM, stevenyhof said: Rendering Materials and Libraries Update for X16... I am putting together the floor plans and now renderings for a condo project. I am posting this here because this is a continuation of the rendering method I proposed in the beginning of this thread. I am using this method to render some of my projects. I needed to put together 5 renderings, and while the first took about 90 minutes, the last two renderings were done in under 45 minutes. As you learn more about Terrain Features, using them to make driveways, sidewalks and landscaping beds, you can begin to set up defaults or parts that can be brought into your model that already have the materials and properties you end up using over and over. The Landscape Library has a few new trees (not Chief) and are larger in file size (Tree01 and Tree02). There are also a number of Hosta plants that are now available to use in X16. The library also has a number of the objects like Grunge, Grade (lawn plants and leaves) and Shadow trees (which I do not use. But if you have a smaller graphics card, they can help with rendering speed.) X16 now supports HDRi backdrop images. I am including a library of some images I put together. HDR08 is what I use now for the "Backdrop" image vs one I made for X15. HDRi images do a better job of creating tree and sky reflections in your windows. X16 Drawing Template I am also including my Template as it includes a number of cameras that you can copy and paste into your templates. https://drive.google.com/file/d/1YAeQKPG87YFoMC9O5Y0-QKWe5EWF_1tT/view?usp=sharing X16 Landscape Library https://drive.google.com/file/d/111cmp7Qe5UIKMqgmQ9rJ_fLWURjj_4eQ/view?usp=sharing X16 HDRi Backdrop Library (used for more realistic backdrops, or for window reflection as I am using them) https://drive.google.com/file/d/1EuUVvrhFGBC4eX5VG54TbrqtAF3dndk9/view?usp=sharing X16 Background Image Library (used for the background images you see in the rendering) https://drive.google.com/file/d/1UIMoHnTTF5t9gnd0F_OjR7d0rfcs5Pbl/view?usp=sharing See the beginning of this thread for rendering method... Thank you, Steve Thank you for all the information you have provided. I have printed all your details and downloaded your library images,etc. Still trying to gauge sizing of images as opposed to backdrops. Most of my renders are exterior and I really didn't want to go to an outside software when I know I can learn from your info. I was doing ok til I upgraded to X16 then all my settings had to change so it is a learning curve. thanks again! Link to comment Share on other sites More sharing options...
stevenyhof Posted July 24 Author Share Posted July 24 10 minutes ago, decorators3 said: Thank you for all the information you have provided. I have printed all your details and downloaded your library images,etc. Still trying to gauge sizing of images as opposed to backdrops. Most of my renders are exterior and I really didn't want to go to an outside software when I know I can learn from your info. I was doing ok til I upgraded to X16 then all my settings had to change so it is a learning curve. thanks again! The one thing I am learning with X16 is to use the HDRI backdrops. I have included some I liked. This makes the house look more real. I still use the X15 background images for some work as you can see above, but there are times on my computer that some kind of light washes them out, makes vertical light strips on it But I like to use the HDRI backdrop with the background images because I can get nice window reflections with it. Big thing is to find a process and reproduce it. With each rendering there is always some tweaking. I also use a few of Chiefs 3d trees to cast shadows vs the 2d trees I include. 2D trees just do not give a good result. Link to comment Share on other sites More sharing options...
Renerabbitt Posted August 7 Share Posted August 7 Another Example of a backdrop and foreground blend Link to comment Share on other sites More sharing options...
stevenyhof Posted August 7 Author Share Posted August 7 Very nice, Rene! What caught my eye are the two piles of mulch in the landscaping. Is that something you are selling? I'm not doing much with rendering at the moment, but I am always looking at 3D objects. For that matter, it is hard to drive down the road without looing at the trees and wonder if they are 3D objects, or what in them look fake - LOL Link to comment Share on other sites More sharing options...
Renerabbitt Posted August 7 Share Posted August 7 4 hours ago, stevenyhof said: Very nice, Rene! What caught my eye are the two piles of mulch in the landscaping. Is that something you are selling? I'm not doing much with rendering at the moment, but I am always looking at 3D objects. For that matter, it is hard to drive down the road without looing at the trees and wonder if they are 3D objects, or what in them look fake - LOL My first few years of rendering I would walk into places and just stare. I was just looking at how light bounces. I would geek out on it. One of the funniest things to try and explain to someone what you’re even looking at. yes I’m seeking a tree and plant package that’s pretty extensive now. Hard scaling and landscaping materials, mounds, tons of bushes, climbers, architectural blocks for distribution regions, potted plants, trees. All with custom CAD blocks 1 Link to comment Share on other sites More sharing options...
blueriver Posted August 8 Share Posted August 8 Stevenyhof, i came across this thread looking for brick downloads - thank you for posting this - beautiful renderings and super helpful!! i am looking for more realistic light colored brick downloads (i do a terrible job importing!) do you by chance have any? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now