Joe_Carrick

Wall Detail is the place to do it.

You will need to edit the "Wall Detail". I do that for Garage Door Openings using Simpson StrongWall. Personally, I might also include that pdf in the Layout. Chief is not going to do everything exactly as you want - or per code. We have to use our talents to do that when Chief isn't quite up to the task.

Just hi-lite the text you want to reply to and select "quote selection"

I actually have a macro that does that for Jack Studs. King Studs would be fairly easy to add. However, you must note that the code rules (table) for King Studs is limited to walls that are less than 10'. Anything more than that would require engineering calculations for wind loading.

Thanks Bob. I'll add that to my boiler plate for Braced Wall Lines.

You might also try using a WALL TYPE that has a layer of 2x1 framing on the outside. It will actually add a level of realism.

Thanks Perry. I'm pretty sure it could be circumvented by structural calcs - but not worth the time. Do you know of any sources for such square washers? I haven't been able to find them in HD or Lowes.

On Page 0

The IRC R602.11.1 requires 3"x3"x1/4" square washers in addition to the standard washers for anchor bolts with "Braced Wall Lines" in Seismic zones "D" This seems to be a new requirement in the 2019 IRC. Actually, I'm using the CRC (California Version of the IRC). Has anyone found an exception to this code requirement?

Yep, it's always 2 separate schedules.

If you just want to eliminate the baseboard but keep any other moldings you would need to create a Room Molding Polyline for that molding and then select the Edit Toolbar Icon "No Molding on Selected Edge"

Display Order > Move to Back -or- Set Fill Transparency

Alan, Normally I use the worst case. But if there's a substantial difference (more than 4" of depth I'll customize. Using I-Joists is a better solution than dimensional lumber for anything more than 2x8's

Assuming that you mean you saved the plan file with a new name ---- you need to open the layout file and "relink" to the new plan.

If you save it as a separate plan, you should be able to copy and paste it to any other plan.

Why are you building them as "framed"?

X9 is almost 5 years old. Even if you post the plan it may be difficult for anyone to diagnose.

The other possibility would have been to make sure the "main" layer was also "foundation" layer.

Without having a complete list of all equipment (with loads) as well as the number and amperage of circuits this wouldn't be possible. It could be done - but only with customized electrical symbols, etc. I find it's easier to let the Electrician or Electrical Engineer work it out. For most residential projects I just specify the appropriate panel size.

Don't forget to set the Default Set (Including Layer Set) for the Cross Section View. This will allow for text, dimensions, line weights, etc to be automatically controlled. In most cases I'm using a 1"=1'-0" scale, but other scales might be used for those conditions where more or less fineness is required.

Some things can be labeled by using macros ( framing cut in cross section for example ) Most other things you will need to manually label. I have some text labels with arrows in my library (simple "NOTE") that I just place and edit the text. Generally, my details are smaller and don't need as much annotation. Using Notes and a Note Schedule is another way to make it simpler when you have multiple notes on a Layout Sheet. Wall Schedules is another way to minimize the amount of annotation. BTW, with this system I am not using CAD Details - just Cross Sections clipped in both directions. It's possible to create CAD Details from these Cross Section Views to store in the Library - but then the Camera Callout automatic labeling is lost.

Glass Doors with Lites ? You should be able to do it in the Door DBX The other option is to create Symbols for Doors and/or Panels

Here's a link to another method of creating details that I find is really nice.

I've been experimenting with Cameras to create Details that can be sent to Layout. One of the benefits is that the below the line text can be set as %page_label% so that it coordinates with wherever the detail is located in the Layout. There are a few tricks: The Section View needs to be clipped both horizontally and vertically to contain just the desired detail The Drawing Sheet of the Section View needs to be set to the appropriate size for the Layout. Generally I find that about 6x6 or 6x8 is appropriate for details. The Drawing Sheet should be set to the desired Scale. The Drawing Sheet should be centered on the Cross Section Additional CAD objects, Dimensions and Text should be added to the Cross Section. I'm still experimenting to see if I can coordinate the Detail Number with the Camera and the position on the Layout Page. Essentially, this method has the advantage of greatly reducing the amount of 2D CAD required to create a fully annotated Detail. The Details more accurately reflect the model (including foundation and framing). If the Drawing Sheet is properly sized, the details sent to layout will fit nicely in the available drawing area. If anyone has additional thoughts and/or suggestions, please post them.

I use some of their detail sheets for deck railings, shear wall panels, etc I just insert the pdf's directly into my Layouts. In fact, it's a part of my Default Layout Template.