Kbird1

Many 16" screens are pretty close in size to the Older Style 17" models due to the much smaller bezels and the screen resolution is higher now so real estate wise I don't think you'd loss anything. My 17" diag. screen (1980 res) in my Sig is 15"w x 8 1/2"h...... and it runs Chief fine though not as fast as my desktop of course. M.

Rene is right above about the Lenovo 7 Series, a Client got one last Month and is very happy, ( I told Her to get 32GB Ram and the extra 1TB NVME for RAID ) but the pricing and availability in Canada is not the same as in the US by a long shot usually but it might be worth a look as I think the "Back to School Sales" just started this week. This is the one My Client got in July and it's on sale , ( you'll need to configure it I think) though you'd need an additional $1000-1200 for the 13900H, 4070 model and 32GB ( Lenovo is one of the few who don't scam you on Ram and Drive Upgrades) though it appears in Canada, they don't offer the Extra 1TB Drive as an addon like in the US. The 1TB in Canada is the upgrade from 512 GB but I think I'd still be happy with it https://www.lenovo.com/ca/en/configurator/cto/index.html?bundleId=82Y3CTO1WWCA1 Of course they Have Models in the Higher Ranges like you may want for Xmas too Jason Mick.

I don't disagree, but the Laptops She is looking at are pre-configured, and most come with 16GB Ram , sometimes it is even soldered to the MoBo these days, but most modern laptops have easy access to the Ram and Drives for User Upgrades in the future, and extra Ram can be gotten on Sale Cheaper usually than through the ManF. Website for example eg at Dell or HP etc. Mick.

I get this on almost every install of a catalogue, and think it is an erroneous error message as the Catalogues install just fine since I did the Laborious Fix in this Thread. Read from Here Down........ https://chieftalk.chiefarchitect.com/topic/39045-x15-catalog-update-error-catalog-could-not-be-found-on-the-server/?do=findComment&comment=295429 5FT-20 is correct above ......... https://chieftalk.chiefarchitect.com/topic/39045-x15-catalog-update-error-catalog-could-not-be-found-on-the-server/?do=findComment&comment=295444 The Fix with the Help of Support https://chieftalk.chiefarchitect.com/topic/39045-x15-catalog-update-error-catalog-could-not-be-found-on-the-server/?do=findComment&comment=295586 Mick

Has your Boss given your a budget Number $$$ wise for the Purchase? as CC also has some options on Clearance I see...... one has a RTX 3080 which is a stronger Video card that the 4060 even though from the 3000 Series (3rd from top) vs the newer 4060 ( 2nd from bottom) , and is only $50 more https://www.canadacomputers.com/product_info.php?cPath=710_4419&item_id=187823 There is also this Gigabyte Laptop with a 4070 GPU which is stronger than the 3080 but is $300 more than the one suggested, but I think would be worth the extra especially longterm. https://www.canadacomputers.com/product_info.php?cPath=710_4419&item_id=236109 or for the same price if an Intel CPU is preferred this one https://www.canadacomputers.com/product_info.php?cPath=710_4419&item_id=236109 or this 17" model if you like a bigger screen for the same price as those above https://www.canadacomputers.com/product_info.php?cPath=710_4419&item_id=235071 Mick

Or in the Default Window before placing them or in your Template if you always use the same Manufacturer. And it shows up in Layout only if you send the Window Schedule to Layout, same as the Door and other Schedules... I personally prefer to do that from a Schedule in a Cad Detail, rather than Plan View. M.

as an aside to this issue.....Make the Plotter your default Printer ( or a PDF Printer ) and delete Microsoft XPS ...at least I am not aware of anyone who uses it or the M$ PDf Printer for that matter.... CP>Hardware and Sound>Devices and Printers> Printers , right click (RC) and make one the Default instead of M$ XPS > RC M$ XPS and delete/remove M.

I would advise you to call Sales and get something in writing ( email confirmation) of what is discussed..... I believe going forward you would need to pay the annual subscription currently of $2000 .... I also believe you can use X13 with no Issues but am unsure of the situation if you go to the subscription Model and the stop paying again. https://chieftalk.chiefarchitect.com/topic/37322-chief-architect-software-licensing-changes-beginning-january-10-2023/ https://www.chiefarchitect.com/licensing/*** *** Chief has changed the link above to lead to the Upgrade Page now M.

It's all about the Video Card with Chief and why they suggest a 4GB Nvidia or AMD Graphics card ( 2GB minimum ) as Chief has always had various Issues with Intel Graphics cards over the years, and there is currently a Known Incompatibility with Intel Arc GPUs for example and previous Intel Xe / Iris cards as well, which maybe your Issue if only running X12. My thread is here: https://chieftalk.chiefarchitect.com/topic/31335-known-incompatibilities-with chief-architect-software/?tab=comments#comment-260441 Chief KB Articles https://www.chiefarchitect.com/support/article/KB-02761/chief-architect-minimum-system-requirements.html https://www.chiefarchitect.com/products/known-incompatibilities.html https://www.chiefarchitect.com/support/article/KB-03146/identifying-the-shader-model-of-your-graphics-card-in-windows.html https://www.chiefarchitect.com/support/article/KB-00106/troubleshooting-3d-camera-view-display-problems-in-chief-architect.html M.

I was just pointing out, in case Kathy is not aware that the SSA Model is no longer available, even to those with existing SSA Licenses. My client has fully switched to X15, so I don't have info on whether they can Install Versions Older than the Version the License was Purchased with as well. M.

AFAIK that function is Automatic and can't be disabled , but perhaps if you save a Single switch to your Library as a new symbol as another non Electrical Symbol ( interior fixture perhaps ) it may allow what you want, but may have some side effects such as Auto Wire connections not working. M.

Yes , one of my Clients just got this one.........82Y30021US there is also the slightly less expensive 82Y30018US Model She was able to get it with 32GB Ram and the Extra 1TB NVME Drive for a good sale Price and Coupon. (GAMINGCTO15) M.

Additional Licences are now added on the Subscription Model according to one of my clients who got another Seat for a new In-House Designer M.

I meant the Fix had broken your symbol , I thought you were already on .X15.xxxx.77 PDF linked above now......... M.

Check the Latest Updates PDF, I am sure there was mention of a Mirror Reflection Issue that was "Fixed" which may mean it has broken you symbol ? Rob posted a link here to the PDF......... https://chieftalk.chiefarchitect.com/topic/39624-new-update-to-x15/?do=findComment&comment=298450 Mick

I think there was a fix for Mirrors in the last update? and you can see the LED, if you turn off Reflections in the Camera Settings, it seems to be work here with Reflections OFF anyway so it might need to goto support for a Fix ? On....... Off....... Mick.

Depending on your Version there is now a Setting in the Railing Wall that lets you "offset from Wall" now. Mick.

Don't know for sure as I am not a Plant / Tree Guy but @Chief_Content might. M.

As TT said they can be moved around once the Toolbars are unlocked, it is best NOT to try and drag it to the very bottom/end though, or they tend to disappear as he said, best to drop the Icon between the last two and then drag the bottom/end one up/back one.... Not sure I understand the Library Browser part, do you not have it on a 2nd monitor already? M.

I was having issues with the latest Nvidia Drivers Crashing myself in different plans this week so went back to the Driver in My Forum Signature below... Mick.

Jared is in Washington, Tacoma maybe? https://chieftalk.chiefarchitect.com/profile/314-jbaehmer/ M.

This only happens ONCE and only if you follow the in Program Update Notice , it is not in your Digital Locker with The Migration and Install PDFs ( no idea Why?) Mick.

The Structure TAB CS is NOT a true representation of the actual Model , it is used to Reference Heights only as a general rule, it is best to cut your own Back clipped Section through the Foundation Wall , which I think you have done.... M.

I'm not a Mac Person but some of my clients are, have you check the Mouse Settings under "System" . I think it was? also I think it was the Magic Mouse for 1 client that had the 2nd button disabled in settings, he didn't even know the mouse had 2 buttons if you use scrollbars in Chief you will also need to enable them in Settings as well , then enable in Chief too. M.

There is a Materials - Wire And Lattice Bonus Library , which has Chainlink which might work? I know it is use for the Net on a Soccer Goal in another Library too. M.