CharlesVolz

Members
  • Posts

    553
  • Joined

  • Last visited

Everything posted by CharlesVolz

  1. Hang in there Jim! We have all missed something while learning this software. You will see basic tips posted on here all the time that one of us long-term users will reply "Thank you" because they did not know that. Yes, you are missing an important one but get a little training and you will be back on track and so thankful! Best, Charles
  2. Adjustable TV Stand I upgraded to a Sony 50" 4k. The larger size is great but you have to decide on your physical setup. You have to keep the monitor low enough not to hurt your neck from too high of a sight angle. I moved my toolbars to the bottom of the screen which helped a lot. Then, I moved the new 50" monitor just off of my desk and mounted on an adjustable floor stand which works really great. I highly recommend this stand. I lowered the tv to just above the desk and do not use the shelf.
  3. I also use WeTransfer.com. Works great.
  4. I already have 2 new drives (and my cost) that I was going to use to build a new rig: Hard Drive 1: Samsung 970 EVO Plus 2 TB M.2-2280 NVME Solid State Drive $297 Hard Drive 2: Seagate Exos 16TB Enterprise HDD X16 SATA 6Gb/s 512e/4Kn 7200 RPM 256MB Cache 3.5" Internal Hard Drive ST16000NM001G $340 Charles
  5. Yea, I bought all of the parts for a new rig minus the video card....got tired of this waiting bs.... and bought a Dell Alienware also. They knocked 10% off when I asked via quote. I hope some of my extra parts will fit :). $3,118 before tax and free shipping. I hope this helps.
  6. Howdy Tom, I can help you! Give me a call tonight. Regards, Charles 210 744-7489
  7. Howdy Jake, I can help you and I am right here in North San Antonio! Regards, Charles
  8. Here is how I used to do it in 2012. Adobe Reader is all you need to open the 3D PDF. I think this may not work anymore with the elimination of Adobe Flash. Creating 3D Pdf Files.pdf
  9. It seems that this is a residential project.
  10. IRC2018 R311.7.6 Landings for stairways. . . The width perpendicular to the direction of travel shall be not less than the width of the flight served. . . Where the stairway has a straight run, the depth in the direction of travel shall be not less than 36 inches. Yes it is allowed so long as the landing is at least 36" deep.

  11. Howdy Justin,

    I can help you! Just email me or give me a call at 210 744-7489. I am in north San Antonio with a daughter at UT Austin (so trips to Austin are cool). BTW, David Potter (512 518-3161) is another local knowledgeable designer/trainer who is in Austin.

    Here is some information about me and how I work:

    I am a creative designer who has acquired unique experiences and perspectives from my collection of work as a designer and builder. I have degrees in structural engineering (BS Rice University) and architectural engineering (MS University of Texas at Austin) and have planned, designed, developed and built various, diverse projects over my 30-year career. 

    I am a member of the American Institute of Building Design ("AIBD"), which provides quality continuing education to ensure its members remain current with technology, materials and building codes. AIBD holds its members to the highest standards of ethics and professionalism.

    I utilize the latest technology like GoToMeeting to work with customers live online and OBS Live to record "how-to" videos for builders, designers and DIYers, instructing home design using Chief Architect.

    I have worked with owners, builders, designers and architects from all over the U.S., Canada, New Zealand and England. I offer time-saving design assistance as well as expert training in Chief Architect. I am available to design your home from concept to working drawings, assist you in learning Chief Architect and/or improve your existing home design.

    Whether you need a home designer or just a few hours of training, I can accommodate you.

    I work in prepaid blocks of time (20-hour minimum for design work and 3-hour minimum for training). Once I receive payment, I schedule the time. (Training students can use the time in 1-hour minimum blocks of time.) When I complete the time, I will send you the plan or you can purchase another block of time. You keep any time credit left over for future help for up to six months after purchase. This method gives you the flexibility to hire me for the work you desire without a long-term commitment. There is no obligation for you to pay for additional blocks of time. My current hourly rate is $95. I am very fair with my billable hours and do not charge for nonproductive time. I invoice via PayPal with the accounting and design agreement attached. I add a 3% technical service fee (rounded) to pay for online meetings, online file sharing and storage, online 3D viewer, etc. and charge a flat 30 minutes for initial calls, discussions and emails; setting up job file folders, accounting, organizing emails and to do list; sharing Dropbox folder, etc.

    I will send you a 20-hour invoice, if that is acceptable, so we can get started. Just let me know.

    Regards,
    Charles

    Charles K. Volz
    Castlerock Designer Homes
    947 Cheyenne Creek
    San Antonio, Texas 78258
    Phone:  210 744-7489
    Email:   CVRE@sbcglobal.net
    Skype:   CharlesVolz
    Web:     CastlerockDesignerHomes.com
     

  12. Remember that a sheet 5/8" Type X drywall in not 1-hour rated. An often-used 1-hour fire wall assembly consists of 2x4 studs @ 16 inches covered by 5/8" Type X drywall on each side.
  13. It could be your layerset has the roof included.?
  14. That is what I do. Every main annoset and layerset has a working version (that I can temporarily add construction lines, etc.) and a final version (that stays the same and goes to layout). That way you do not leave the wrong layers on or off by mistake in layout. Regarding Saved Plan Views: If you go to a layout plan and open a view, that will give you that view with the correct floor, camera, zoom, reference floor, annosets, layersets, etc., the same as a Saved Plan View. That helped me understand what a Saved Plan View is.