scottharris

I have an I9, MSI Laptop w/ a 3070 GPU and Windows 11. I too frequently see the 3D ‘device removed’ error. In working with our testing & engineering groups, we believe this is a video driver issue from NVIDIA on the 3xxx GPUs in Windows 11. NVIDIA is working on it (maybe too slowly). I finally moved my laptop to Windows 10 and so far have not seen the issue. Moving to Windows 10 was not ideal, but I also had other performance issues that appear to be solved with Windows 10.

I have both a Mac and PC laptop that I have damaged the batteries by CPU ray tracing overnight. Typically, I would setup the scene and then ray trace at a higher pixel count overnight. My first experience was when the Mac was very, very hot one morning. Later I found the case was warped and the battery was the cause. The PC laptop seemed to manage the heat better, so I continued (?). Recently its battery stopped taking a charge and I ordered a new one. In replacing it, the battery had mushroomed (see photo). It should be flat. I’m sharing the story to perhaps save you a battery replacement or possibly worse. CPU ray trace on laptops in short periods, and/or reduce the CPU utilization, or use a desktop, or use real-time GPU ray tracing. Happy New Year!

Here you go. This is using an auto roof. The left side of the house has a +6' higher ceiling. The plan is posted if you want to investigate the wall settings to build it. 1463105307_ShedRoof.plan

Greg, if it's not in your digital locker and you cannot do it online, please call us Monday. We will be open at 7am. Your SSA should still be valid thru year end.

Bob, it looks like you are using X12? We made a number of framing changes in X13. When I open your plan – since it is set for auto framing – does this look like you would expect ? (see the attached image). Here’s a related video for more info: chiefarchitect.com/videos/watch/316/designating-platform-or-balloon-framing-conditions.htm

You can set that default in the Ceiling Finish Definition. In the attached screen shot, it’s using ‘storm’. Change it here to what you want for the initial material.

You might find this video helpful to learn about PBR rendering chiefarchitect.com/videos/watch/10251/real-time-ray-tracing-setup-optimization.html

Also, we do offer 1-1 personal training where we can screen share. chiefarchitect.com/training/

You might find this video helpful to create a hung foundation https://www.chiefarchitect.com/videos/watch/5202/creating-floor-platforms-that-hang-inside-walls.html

Here's an example of a detail with ibeam / post connections. You can find a few in the Lake Point sample plan.

These are the tips I use when creating a 3D walk through -

To push the fireplace into the wall – you can override bumping/pushing by holding the control key (PC) / command key (Mac) and sliding it in with your left mouse button.

Style Palettes can allow you to change the cabinet door types – you may need to dial in the scoping settings to limit just the door type. This Style Palettes video may help.

See if this helps in the Symbol Dialog.

There’s a video that shows a few different ways you can place the apron / farm sink depending on your design https://www.chiefarchitect.com/videos/watch/1552/placing-an-apron-sink.html

The ‘lower wall type if split by butting roof’ tool you mention is available in Home Designer Pro and Chief Architect Premier/Interiors. For your work around, you might try a section view, use the backsplash tool, reshape, and paint it.

Some background and information you may already know. The Mac M1 is an integrated processor that contains the CPU & GPU. Intel has similar integrated processors like the IRIS. Typically, the integrated processors will not have the graphics performance of the machines that have both a dedicated CPU and GPU. Real-Time GPU raytracing is not supported on them (CPU raytracing is supported). In addition, Chief Architect X13 does not currently support real-time GPU raytracing on the Mac because its graphics are not at the same level of the high-end graphic cards (NVIDIA / AMD). I run Chief Architect on both the Mac & PC and seem to work equally as well, with the exception noted above: 2019 15” MacBook Pro 32GB, I9, AMD Pro 555X 2019 15” Lenovo Laptop 16GB, I7, NVIDIA 2060

Chief Architect works with both Apple & Intel.

Be sure to click on the ‘top rail’ in the dialog panel. Then you should be able to check the ‘extend’ option.

Are you looking for this setting on the ‘Rails’ panel?