DRAWZILLA

(b) If three 90-degree elbows are used in the vent system, then the maximum vent capacity listed in the tables must be reduced by 10 percent (see Section 504.2.3 for single appliance vents). This implies that the 5- inch-diameter vent has an adjusted capacity of only 110,000 Btu per hour. In this case, the vent system must be increased to 6 inches in diameter (see calculations below). 122,000 (0.90) = 110,000 for 5-inch vent From Table 504.2(2), Select 6-inch vent 186,000 (0.90) = 167,000; This is greater than the required 120,000. Therefore, use a 6-inch vent and connector where three elbows are used.

I always leave MS updates on, and have the latest from NVidia also, without any problems like that with window labels which I have macro's for..

They can have a longer length but you need a 6" vent.

Dropbox works for a lot here

upgrade to X10 , you'll love it.

I always put a big circle on the pages that have nothin on them until I get to that point so they register.

Yes, I was just talking about the blue color.

you can adjust the color in those same settings

try adjusting the PBR settings in the camera settings, same place as "rendering technic options"

Don't use "use generated sky" and "sun follows camera" at the same time. It will slow you down so much. unusable.

It is silly to have to turn off the casing and change the number, I really don't like to use the ignore the casing option, or you will see the casing imbedded into the wall in floor view. I always like it the way it's built, you can always widen the hallways to accommodate whatever casing you might have. Your contractors will scream at you if it's not correct.. If your plan calls for 6" or larger casing, you need to plan for that. Real world conditions rules. I realize in the condition you stated it doesn't matter b/c it's an opening without any casing.

set your casing to 0 and you can move it closer to the wall

Listen to that young man, he is the master of all Chief.

try to remove the gable end wall on the attic level of the 2nd floor and let it rebuild automatically or manually.

Thanks Michael, didn't know that, I guess I should dig in and revamp my plan notes since I don't think Chief is adding them anytime soon.

OK JOE, THANKS ,I CAN DEAL WITH THAT. Never thought of using macros in the plan notes.

Nice use of plan notes and spec's, are they all automatic or did you have to fake them?

Thanks Mr. bird, have you seen your brother Larry around.?

You might also state where you are

don't see any attachment.

I think Chief is trying to put everyone on Auto pay, I had to call and take me off that b//c I don't even have the same card I used last year (changed banks) and there is no way to change it online.. I still haven't got any renewal notices and I usually pay early. Remember, if you have drawn any jobs in X10 as a beta tester, you must pay or you will not be able to access those new jobs.

I thought it is 495.00 am I wrong

I always get the one with the built-in camera for those long distance measuring. You just can't see the little red dot in light situations, like daylight. The camera gives you an exact placement of the dot at long distances. I just couldn't be without that option and yes you will pay more but worth it.

now that is something we all need.

yep it's a very nice set of brick textures over 200 of them. thanks Dan