Kbird1

Thanks G. that's my learning for today

Do your forum signature and Fill in your system hardware , then make a post about the video Issue and I am sure Others will help if they can.... *** to fill in your Signature .... go up to the top RH Corner above ^^^^ and click on your UserName > Account Settings> Signature.... and enable Signature (will Turn Green) then add your Hardware Details and Chief Software Version, as different Versions require different Answers. M.

I am not surprise Nvidia says the last Driver was from 2009 for the 7 Series Cards.....but there seems to be support of Win7 32bit and Win7 64bit... and Vista. https://www.geforce.com/drivers/results/8972

I thought that snip was from the Video he mentioned?

Thanks , well I guess I am out of Ideas then , I thought this was why they suggested a Clean Install each version , so you didn't miss any of the new Icons or Tools. M.

You are right, it would need the Old Toolbars ie if the Toolbars were migrated when the newer version is install, rather than a Clean install done, then I didn't think we'd see the new Icons perhaps.

I think that is the Original one Joe , the Chromium one is version 74.xxxx , if it doesn't remind you of Chrome then it's the old version that came with Win10 Originally.

If you used an old plan as a template it may not be available eg from X9 , as that Icon we got new in X10 I think.... M.

I beleive Joe is referring to the new Chromium Based Edge, I know I am.....currently available as a Developer (weekly build) or Canary Version (Daily build) even if you are on th eWindows Insider Track. https://www.microsoftedgeinsider.com/en-us/download/ https://www.tenforums.com/windows-10-news/130424-microsoft-edge-insider-preview-builds-now-ready-you-try.html

the change Defaults Button? ( or Save As Default Button) ... should be on the Edit Toolbar if it applies to the Object Selected. M.

I am just trying the new Edge too and it it much like Chrome or FF. I added an AD Blocker though.... (ABP) Thanks for the Page link BT .... in Edge it is there but no link in Edge Options>System , but put...... edge://settings/content/notifications in the address bar and it is there, and you can add Websites that way too , to the ADD or Block lists.

Just watch the polygon count of each model or Chief will get Very Slow.....

There are a few Plants when I filter for Interiors X9..... not all are 3D though..... https://www.chiefarchitect.com/3d-library/index.php?r=site/detail/787 https://www.chiefarchitect.com/3d-library/index.php?r=site/detail/786 https://www.chiefarchitect.com/3d-library/index.php?r=site/detail/788 https://www.chiefarchitect.com/3d-library/index.php?r=site/detail/975 Filtered library.....

Usually a website will ask and you can choose NEVER ( or Block) if desired, but you may get this if you clicked "Not Now" previously , until you set Never then it should stop bothering you. M.

No, actually to the slow downs , they were getting worse and worse , then I noticed it was X10 as well as X11 , so I looked elsewhere for the issue. I had read some ( not Chief Users) where having issues last month after installing certain KBs , so in the end I tried uninstalling last month's Cumulative Update too.

Perhaps use one plan for CDs , and use a Save As Version for Client presentations with all the plants and other stuff needed , so you don't need to "work" in it everyday. many SU models are done by Students and tend to be very high polygon count , so keep an eye on that too and anything with alot of curves will slow Chief down too, an example of that was a Multi Family someone posted on the Forum with a similar issue , the solution was to swap out the 30+ round vanity sinks for rectangular ones. I was having issues in X10 and X11 due to certain Windows 10 Updates , I un-installed them and did a repair install of Win10 with the latest .iso from Microsoft and all has been good the last two weeks... M.

thanks again for your time and Efforts Joe.... M.

I have never seen it done like that , but I sometimes use a Full tread at the Top and I think a 1/2 can be done the same way. Set the Treads and heights to Manual,( uncheck both auto), lock the top Height Reference to the top Tread not the landing and then ADD 1 tread ( or Riser or increase Riser ) and set the Top Height equal to the 2nd storey Floor Height. When you Open the Staircase DBX again the Reference height seems to go back to Floor Landing.....see pic.... I set it to 133 3/4 originally per the Structure pic from the 2nd floor. you could then drag the floor 1/2 way through the top tread if needed?

Personally I think you need to submit this plan so they can see what is going on with these walls....that ain't right , but I am not sure why the Recessed Cans are finding the Roof Sheathing other than they are ignoring the main room Ceiling for some reason?. In my Plan I found the Lights above the main room ceiling and had to drop them 30-40 inches but they are sloped per the Roof slope so not much good , usually I want them sloped and they don't want to do it though Some Potlights I made a while back set to insert on the Floor work though ...just raise them to 119 3/4" in this case after dropping them in the Room. use the 4 or 5" labelled Flr-Mt. MHD_Potlights_X11.calibz

There is Crown in the shower using the Shelf Ceiling , check both pics.... the main Room Crown continues around , which is what I thought was desired? I should of left the plan last night but figured you didn't need it.... but here you go.... Crown Molding Test_MHD.plan

the Glass is cutting the Crown , that's why it is not in the Closet as those are standard 1/2 Walls. I had a play and The Trick is to make a Shelf Ceiling in Both Showers at 110" ( or whatever height you want glass too), uncheck Room has Flat Ceiling and remove the moulding from both Shower Rooms. ie no Crown or Base. Ps....there's no wall hatch cos you haven't hatched it ? or do you mean the Fill? * I think it was cos you set the Hatch in the Fill to 4" ...ie wider than the wall's main layer, and the angle was wrong? try 90° M.

This is the technique.....follow the Tutorial , then you'll know how to do your Fascia Board too. https://www.chiefarchitect.com/support/article/KB-02925/using-polyline-solids.html M.

It's telling you the Terrain is not Upto Date , so I assume you haven't got it set to Auto Rebuild? have a look on the the Terrain Menu, you will see the same Icon.... M.

Break the Wall where it crosses under the staircase and mark the Wall "No room Definition" so you still get the drywall on the end of the full height wall. The down side is you need to use a Room Moulding Polyline to get the Base when you mark it "no room def." I use a different method than Steve but I think it should work just fine....

Rename the Old Library and Import it as usual......the renaming stops CA from AutoUpdating the Folder , the downside is you have two folder of the same name most likely. I am currently doing this with the Certainteed Library as the Fiber Cement Siding is gone in X11. https://chieftalk.chiefarchitect.com/topic/21994-oh-boymisunderstanding-on-my-part/?do=findComment&comment=179929 M.