Kbird1

Turn the soffit off, ( boxed eave) it wont match the ceiling due to the slope on the roof plane.... see how it shows on edge at one end? Is the Room ( deck) Ceiling high as well? ie not at top of columns etc. that maybe the bottom of the roof plane I am seeing though?

You can make the Railing any Railing type you want, it doesn't need to be solid as in the example by CA, it can even be a pony wall and it doesn't need to be around the Perimeter of the building either. ( similar to what Eric is showing I think they can be pulled in) Chief doesn't do Sloped Floors , but that can be fixed in a Section View >CAD Detail ..... or for the more adventurous put a manual roof plane inside the "parapet walls" . Or post the plan , so those with time can have a "play" M.

You need to post the CA .plan file not export a dwg and post it

X13 PBR looks more like Vector View now ......did you adjust the sun intensity ? as I noticed the nice Mountain scene is washed out in X13 too. Mick

NO , CA uses it's own AO, not Nvidia's , unless that has changed in x13 but I don't think so? @Dermot feel free to correct me ...... M.

The Disappearing Crash ( no warning , no save function) is not new, and is apparently not resolved I saw it numerous time in X12 https://www.chiefarchitect.com/support/article/KB-03049/troubleshooting-chief-architect-software-closing-unexpectedly-on-windows.html

Use a 3rd Floor, Roof and flat Ceiling Off, exterior walls become the 42" railings, make Floor Finish black asphalt etc basically how Chief suggests you do a flat Parapet Roof. https://www.chiefarchitect.com/support/article/KB-00295/creating-a-flat-parapet-roof.html

sounds like they have one of the Home Designer Products, for which you need to enable the editing capability ( will vary depending on version of HD.) The How To : https://www.chiefarchitect.com/support/article/KB-00516/sharing-a-plan-file-with-a-home-designer-user.html Mick.

No taller building in the drawing? Scroll out and click one of the two dimension lines and look for the diamond on the end of the extension line.....grab it and pull it back to the ridge seen in the pic...use CTRL key as you pull it back / down if needed. There will be one diamond for each dimension line.....

Thanks for the laugh Larry And to Allan for a reminder to add V.I.F to As-Built Drawings.... Mick.

I usually Rotate the Layout Box , but sometimes even that is not enough if the local jurisdiction requires 1/4" scale as many do.......then ARCH_E1 is needed

2.) ALT+Q uncheck Auto Attic Walls > delete walls not needed > Re-enable with ALT+Q again..... Mick

More like 65-100% ------ 100% if you have a square box , no porches or deck etc..... I didn't understand by Overbuilt you meant a California Frame Over , as it is called in some areas, Chief has never Over-Framed Auto AFAIK ...... However the two Pitch Roof should give you what you need as far as roof planes if not the way it is built ( framing) in the realworld at which point a Truss Base can be used to overframe I think.... https://www.chiefarchitect.com/videos/watch/350/using-a-truss-base-to-truss-intersecting-roofs.html

assuming I understand the situation ....... The Porch Wall should have the Upper Pitch enabled ( input main house pitch) and the Baseline distance set to the width of the Porch so the pitch change happens over the Exterior Wall This is useful only with Auto Roofs I think...... Mick.

In Older Versions of Chief you couldn't Copy Cameras AFAIR, so maybe that is the issue? M.

SSA comes with the license the 1st year so you will both get X13 but if you both don't get SSA in the future and thus do not have the same version you will not be able to exchange plans from higher to lower versions ( no backwards compatibility) To separate the Licenses you have to pay the going price difference at the time AFAIK , so about $900 today?

Yes , because it was a System Builder, local to me, they agreed to let me reuse my old case, Power supply and CPU Fan to save some money. At the time I did not think about the 32GB RAM in the old machine which I could of reused too as it was DDR4 already. But then it doesn't hurt to have a second PC in the house for others to use either, or as a backup, I would of looked at Mark's build from AXA if I could of. ( they don't ship here) , I agree with his other comments on PCIe4 etc , my Z590 board was the same price as the Z490 though but I did not go High End (mid) like Mark, some boards need an 11th gen Chip to enable the extra .m2 slot(s) though , but most have 2 or 3 .m2 slot these days , one for OS and 1 for a Data Drive. M.

It should , is it maybe older than 7 years though? more like 17 ?........ the date on the bios says 2004 ....maybe that is a typo? hmmmm if model no# is right there is no V1.8 Bios ......at least not online https://www.msi.com/Motherboard/support/Z97-GAMING-5#down-bios https://www.msi.com/Motherboard/Z97-GAMING-5/Specification To be honest as Rene said they are very hard to find ( or have you found one? ) , many including myself have bought a prebuilt to get one @MarkMc has several posts about his Prebuilt (3070) on here too. M.

1st Off you need to run a library update yourself once a week say, so it can refresh any installed libraries. this week for example Chief was working on Paint Libraries apparently The answer to your question is that Chief requires Manufacturers to update their libraries once per year, ( see Sticky at top about digital Content), or here : https://www.chiefarchitect.com/partners/catalog-partner-program.html whether they all do it I am not sure about though, however Cambria was updated just last week, I seem to remember. ( Yes.... 5-19-21 ) https://www.chiefarchitect.com/3d-library/index.php?r=site/detail/887 *Note: that not all libraries have a Full Manufacturers Catalogue included, but taking a screen grab on a Manufacturers Website is very easy and then making a New Material out of it if needed. https://www.chiefarchitect.com/support/article/KB-00767/creating-a-new-material.html

I'm still having Issues with this , and though not a "Chief Problem" since it effects ALL installs and uninstalls, but today it was Chief in particular, but I found that Microsoft has a Tool / Troubleshooter for helping with this Issue too, which did the uninstall off the Old Computer fine today https://support.microsoft.com/en-us/topic/fix-problems-that-block-programs-from-being-installed-or-removed-cca7d1b6-65a9-3d98-426b-e9f927e1eb4d M.

Well I tried a few things that did not help, so I decided to try a Driver from before the 460 series, the same driver as my old computer is using and have found Nvidia Driver 457.51 ( links below) has thankfully worked for me. Link to DCH GR Driver https://www.nvidia.com/download/driverResults.aspx/167108/en-us Link to Standard GR Driver https://www.nvidia.com/download/driverResults.aspx/167106/en-us Nvidia's Advanced Driver Download Page ...personally I do not use Geforce Experience. https://www.nvidia.com/Download/Find.aspx?lang=en-us Mick.

Huawei devices are still available in CANADA too thanks for the Tip Renee , it something I expected the Pixels to have actually

I am using DP cables on all 3 monitors same as on the old computer, which I have now hooked up, to the same monitors, via the monitors hdmi ports instead and I don't see the issue there. Both computers are using Win10 125% scale on my 32" Benq monitors, that has changed old to new either. I only get the test issue with other's plans I open but then again I don't play with scaling on my own setup as that totally messes with the Desktop Icon layout...and I have many --- I'm old school that way I reinstalled Win10 this week ( lots of weirdness from Store install so did a Clean re-install) but have done some "tweaking" as normal, so it's possible, I have accidently done something, but I use the same settings on the old computer too. Their was a Windows Update on Tues. ( the usual 2nd tues. of every month they do) which seems to have messed with the Wireless mouse, so I have gone back to my Wired mouse for now, but I hadn't gotten Chief installed at that point , so can't say if that update had anything to do with it too. M.

It seems it is Side Window related...... if I double click the ALDO or PB so they rejoin the main window in the default position , the issue goes away again........ Opening a Schedule and putting/pulling it on to the LH screen for eg. ( I wish it would not go full screen Auto) does not make this happen...at least not yet .... It's like the Side Windows are now causing Chief to think it is wider than it really is....... but I have no idea why it happens on this computer and not the old one....same monitors and cables , same version of windows 10 too I think ... video cards as diff. ( see Sig.) a GTX 1070Ti vs a newer RTX 3080 Card. M.

Reset everything except toolbars and turned off the side monitors and Chief was okay again ...... Until......I put my Active Layer DBX back on the second screen and bam menu issue came back , so apparently me thinking this is not related to the other Menu Bug which seems to effect Toolbars only was wrong.... Only for me it means X12 is unusable on this computer currently..... M