glennw

Roger Make sure your Active Library Filter is "Not Filtered". To double check, make sure all the libraries in the core library are unchecked in the Manage Library Filters dbx.

Joe, And hence, no area! You can't have a room on the A floor. End of storey.

The simplest way to draw a down stair is to Alt drag the stair - it goes down instead of up.

Nicinus, What Mode are you using to paint the wall? This will make a difference. Is it a single layer wall or a multilayer wall - sounds like it may be a single layer wall? Or if it's a multilayered wall, it has the same material both sides?

I will email you.

Georgina, I'll put my hand up. I could do a Skype and share screen or a GTM.

Mick, I believe that setting only applies to the generated terrain - not the elevation lines themselves. ...if I get your meaning.

Ah...you need to uncheck Ceiling Over This Room - everyone knows that!! . It is the ceiling joists that are forcing the wall top down. I'm off to bed now so will have a play in the morning and see if I can figure a way to do it with the flat ceiling.

Alan, It can be done - but it's not very logical. Delete your blocking. Open the roof dbx and set the Gable Sub Fascia to zero - it will probably default back to 1/16". This moves the top of the walls up to the roof.

Under normal circumstances (OOB) the label is controlled by the Text Style (should be Truss Label Style) associated with the Framing, Labels layer.

Larry, Try turning on On Object snaps and use End to End dimension.. It looks like your snaps are toggled off. Note that Michael has On Object snaps toggled on.

For those of us who aren't familiar with Acad, can you explain in more detail what you mean.

Larry, You got it - that's exactly what I was going to suggest. A couple of tips. 1. You can set the default Height Above Floor to offset the height of the footings in relation to the foundation floor level. No need to move the foundation floor height to place the post/footing. 2. You can use the Hide Terrain Intersected by Building to turn off the display of the terrain within the foundation walls.

Perry & Joey, The grade line is controlled by the Terrain Specification, not the floor heights - which makes sense to me. You can set the grade line to whatever you want using the terrain tools. The Elevation Region is the one to use if you want a level building pad at a set height.

Joey, This may help with the confusion regarding top of footing height. http://screencast.com/t/MQLFXlaE

Joey, I think what is happening is this: If you have a level zero (foundation) with Floor Under This Room checked (ie, the foundation has a floor) - Chief measures Height Above Floor from top of footing to top of foundation floor. If you have level zero with Floor Under This Room unchecked (ie, no foundation floor) - Chief measures Height Above Floor from top of footing to bottom of foundation floor - even though there is no visible floor.

No problems Scott, but I did suggest that solution way back in post #19, which you must have missed. Seems like a no brainer to me! Too simple for a vid.

Jeff, Chief does not do structural analysis. I doubt that it the roof baseline preventing the window placement - although I could be wrong. I have no trouble placing a window under a baseline. I suspect that there is something else going on. My best guess is that you have broken the wall at that point. Best to post the plan.

Can I go to bed now?

Scott, Joe is using the Ruby Console which you can find under Tools...Ruby Console. Type owner.referenced_full_filename in the input box at the bottom of the dbx.

Scott, If all you want is a layer with the filename in it, use the label with the %referenced_filename% macro for the label. But I guess you are going to say you already use the label for something else. So..easy way, just select the layout box and use Match Properties tool. It will tell you the filename and path, select one and all the layout boxes on that layout sheet that use that same plan file will be selected for editing or deletion.

Scott, Isn't that the file name up in the title bar of the dbx? The windows one looks like the attached where the file name is in the title bar and down the bottom in the File Name dropdown box. Edit: I just had another look at your dbx. Is that the Filename box below the title bar that also has the filename in it?

Joe, Isn't it great that there is nearly always another way of achieving something in Chief. Mainly, I wanted to point out the beauty of using Match Properties to select all the particular matching layout boxes on that sheet and be able to edit them (including deleting) all in one go, without having to edit each one individually.

Or you could try View...Toolbars

Joe, This way may be easier. It's not perfect and can only do 1 layout page at a time. So, although not perfect, it may help. If you know a layout box on a page is from a plan file you need to match, click on the layout box and then click Match Properties. The dbx has Referenced Filename and a Referenced Full Filename properties that you can use to select all the layout boxes on that layout page that match that criteria. Or you can just use the Match Properties to quickly find out the file name and path.