Renerabbitt

Members
 View Profile  See their activity

  • Posts

    4619

  • Joined

  • Last visited

 Content Type 

Everything posted by Renerabbitt

  1. Renerabbitt
    please post your .plan file so we can take a look. Can't tell about the railing without seeing the plan though I have some guesses. For your stairs, draw the stairs using alternate draw mode(right mouse click) This will draw the stairs down, thus changing the reference elevation
  2. Renerabbitt
    best if you post your plan file. The return roof plane has been moved so the baseline is not snapped to your main wall layer. There are some other things a bit off as well possibly. try posting the .plan
  3. Renerabbitt
    post spacing, newel positioning, architectural software, deck railing design, construction detailing, beam to post setup, architectural adjustments, dimension setting, railing customization, partition wall setup, construction software tutorial
  4. Renerabbitt
    Use the auto detail function. this is correct as you this is a cross section view and the cutting plane goes through your foundation walls. Auto detail will poulate a CAD polyline with fill that matches your settings for those walls.
  5. Renerabbitt
    didn't quite understand the question, can you explain the problem further?
  6. Renerabbitt
    Certainly, although you might post your plan here so everyone could benefit from the guidance. Sometimes if a roof is simple enough we will do it and demonstrate the methods used in a video and share it back
  7. Renerabbitt
    you should share these..as a community we come up with some pretty cool solutions but we have to know the problem I always love a good challenge
  8. Renerabbitt
    Happy to take care of any of your Chief Macro needs. Custom conditional macros that drive custom schedules and much more. Automatic and user configurable pricing systems, custom schedules, callout linking systems, external file based macros and much more.
  9. Renerabbitt
    would need to know more about this, a floor material region should work just fine or split your room with a room divider
  10. Renerabbitt
    you are either using a rendering mode or camera that is vector based or you have textures turned off. I am guessing the former. Which camera are you using?
  11. Renerabbitt
    That script wasnt quite all the way there, it was missing a lot of calcs. The following script is far more accurate but still wont work for shaped windows or custom muntins:
  12. Renerabbitt
    well since you are making the argument, arguably if your substrate or insulation is not a combustible issue then the vulcan vent is your fire stop and should suffice as that is the "vent" to the building envelope
  13. Renerabbitt
    You simply need a non-combustable non-corrosive mesh which you can just draw in with a cad line and add a note
  14. Renerabbitt
    Same methods apply
  15. Renerabbitt
    Fillers and partitions are there own category, so just remove them from the cabinet schedule and include them in another schedule but remove base/full/wall cabinets
  16. Renerabbitt
    it doesnt have some features of zom, but easy to work with and yes just runs through a browser and they keep adding features
  17. Renerabbitt
    just had to use zoom and shared my screen..abysmal performance..glad I dont use that anymore, haha
  18. Renerabbitt
    you can make anything that reports to a schedule report to a custom schedule.
  19. Renerabbitt
    not a fan of meet either. I use streamyard which is for more than just video conf calls. Also loom does a great job I hear and transcribes the entire meeting along with downloadable transcribed content with chapterization
  20. Renerabbitt
    There is a Ramshead in the door trim catalogs that is close to this but it does come with fluted pilasters
  21. Renerabbitt
    do you have a photo of what you are looking for? There are some in the White River Hardwoods Catalog
  22. Renerabbitt
    That's because zoom is using hardware acceleration and heavily fights the encoder as it isnt very optimized. Also the reason I do not use Zoom
  23. Renerabbitt
    I responded on my YouTube but you can simply cut the object (ctrl+x) and paste hold it on another floor. thats 3 hotkeys that can be performed in under 2 seconds...modal windows take longer than that to open so its the fastest way
  24. Renerabbitt
    Nothing wrong with your current computer system..not worth the money IMO. My ten year old mobo and cpu on the Evil Dead machine in my sig is only 20% slower than triptych top of the line computer when it comes to raytracing. We are talking just a second or two
  25. Renerabbitt
    you could probably report that, but I don't think it will get very far. Truth of the matter is that this isnt a spherical image, and chief knows it, you would get warping as it was stretching around a globe. It didnt used to work this way but it works in a way that benefits more beginners because they just want to load in an image and have it show in the background. So instead of a planer projection chief is doing something else to make it easier for you. Instead...make a true spherical image in photoshop and load it up and use that instead, it will work as I showed in the video since those are backdrops I created