rgardner Posted January 27, 2020 Share Posted January 27, 2020 16 minutes ago, Renerabbitt said: POST 26 Using your iPad as a toolbar touchscreen the easy way: CLICK ME TO GO BACK TO THE INDEX!!! How about for OSX? Link to comment Share on other sites More sharing options...
Renerabbitt Posted January 27, 2020 Author Share Posted January 27, 2020 1 minute ago, rgardner said: How about for OSX? Duet Display is available for Mac and Windows, or you can use the built in Sidecar app Link to comment Share on other sites More sharing options...
rgardner Posted January 27, 2020 Share Posted January 27, 2020 6 minutes ago, Renerabbitt said: Duet Display is available for Mac and Windows, or you can use the built in Sidecar app Unfortunately sidecar has limitations to the newest hardware and my Mac Pro 6.1 doesn’t support it. But I willcheck into duet for Mac. thanks I might give this a ahot Link to comment Share on other sites More sharing options...
Renerabbitt Posted January 31, 2020 Author Share Posted January 31, 2020 POST 27 We're you as excited about the Cafe line of GE appliances at IBS this year? I sure was!! so I stuffed it into my first project back in the office. I did not model these, they are from the manufacturer, I simply fixed a lot of mistakes and cleaned up a lot of geometry, then imported and covered in custom materials. I did not have time to clean these up and reduces faces so be warned, these are 30-50K face count which will slow your computer down. Download: RABS CAFE APPLIANCES.calibz CLICK ME TO GO BACK TO THE INDEX!!! 3 Link to comment Share on other sites More sharing options...
kwhitt Posted January 31, 2020 Share Posted January 31, 2020 Thanks for sharing the GE Cafe appliances. They're quite popular with my clients too. Link to comment Share on other sites More sharing options...
Donco15 Posted February 1, 2020 Share Posted February 1, 2020 Simply Amazing.. Thanks for sharing this.. Yes I was truly impressed with this Café Line at IBS this year. Great show overall... Love the New Video x12 and the Ipad - @Renerabbitt - Thanks for all your contributions on the Forum Link to comment Share on other sites More sharing options...
Renerabbitt Posted March 22, 2020 Author Share Posted March 22, 2020 POST 28 Sometimes you want to show the housing. Here you go. Halo 4 inch new construction with LED. Download: RABS NC HALO 4 INCH WITH HOUSING CLICK ME TO GO BACK TO THE INDEX!!! Link to comment Share on other sites More sharing options...
Renerabbitt Posted March 26, 2020 Author Share Posted March 26, 2020 POST 29 Place this sink into your cabinet and paint it the same color as your countertop to create an integrated sink top. Download: RABS INTEGRATED SINK CLICK ME TO GO BACK TO THE INDEX!!! 1 Link to comment Share on other sites More sharing options...
dskogg Posted March 26, 2020 Share Posted March 26, 2020 2 hours ago, Renerabbitt said: POST 29 Place this sink into your cabinet and paint it the same color as your countertop to create an integrated sink top. Download: RABS INTEGRATED SINK CLICK ME TO GO BACK TO THE INDEX!!! Thanks rene... Link to comment Share on other sites More sharing options...
Renerabbitt Posted March 26, 2020 Author Share Posted March 26, 2020 2 minutes ago, dskogg said: Thanks rene... Guess I should be more careful about my vector lines, doesn't look as great in watercolor :/ Link to comment Share on other sites More sharing options...
Renerabbitt Posted March 31, 2020 Author Share Posted March 31, 2020 POST 30 New tutorial for building showers efficiently in Chief X-12: CLICK ME TO GO BACK TO THE INDEX!!! 1 1 Link to comment Share on other sites More sharing options...
kMoquin Posted March 31, 2020 Share Posted March 31, 2020 Rene - good technique - thanks for sharing ! Link to comment Share on other sites More sharing options...
Kbird1 Posted April 1, 2020 Share Posted April 1, 2020 On 3/30/2020 at 6:46 PM, Renerabbitt said: POST 30 New tutorial for building showers efficiently in Chief X-12: Thanks Rene -- one new feature in X12 you could of also used it the ability to remove Room Moldings from any wall now , you could also set that in the defaults for the Shower Curb Wall in your Template. I'm also wondering which Glass or how you altered the material to get it to show better in Camera Views thanks. Link to comment Share on other sites More sharing options...
Renerabbitt Posted April 1, 2020 Author Share Posted April 1, 2020 24 minutes ago, Kbird1 said: Thanks Rene -- one new feature in X12 you could of also used it the ability to remove Room Moldings from any wall now , you could also set that in the defaults for the Shower Curb Wall in your Template. I'm also wondering which Glass or how you altered the material to get it to show better in Camera Views thanks. Thanks Kbird- I forgot to address this but my SHWR room in the style pallette did not have room moldings so they were removed when I applied it to the room. You can see it in the video..there were a few tricks I didn't mention..oops I'll try and upload the shower glass texture tomorrow Link to comment Share on other sites More sharing options...
Kbird1 Posted April 1, 2020 Share Posted April 1, 2020 2 minutes ago, Renerabbitt said: Thanks Kbird- I forgot to address this but my SHWR room in the style pallette did not have room moldings so they were removed when I applied it to the room. You can see it in the video..there were a few tricks I didn't mention..oops I'll try and upload the shower glass texture tomorrow Thanks , if you would mind sharing the Glass texture that would be great. at the start of the Video you used the Room Molding Polyline to remove the Shower Curb base, with the new No Room Molding set in the Wall Defaults in X12 that wouldn't be need to be done. ......especially if using the Pallet is needed or desired. Mick. Link to comment Share on other sites More sharing options...
Renerabbitt Posted April 1, 2020 Author Share Posted April 1, 2020 2 hours ago, Kbird1 said: Thanks , if you would mind sharing the Glass texture that would be great. at the start of the Video you used the Room Molding Polyline to remove the Shower Curb base, with the new No Room Molding set in the Wall Defaults in X12 that wouldn't be need to be done. ......especially if using the Pallet is needed or desired. Mick. Maybe I’m missing something. I did want baseboard in the bathroom, just not against the curb. Is that what you’re saying we can do now? Edit: ah I see it now. Nice! Link to comment Share on other sites More sharing options...
Kbird1 Posted April 1, 2020 Share Posted April 1, 2020 5 hours ago, Renerabbitt said: Maybe I’m missing something. I did want baseboard in the bathroom, just not against the curb. Is that what you’re saying we can do now? Edit: ah I see it now. Nice! Yep ....... I guess my Pic wasn't as clear as I thought, I really like it , much easier to use that the Room Polyline when needed. Mick. Link to comment Share on other sites More sharing options...
Renerabbitt Posted April 2, 2020 Author Share Posted April 2, 2020 POST 31 Free Vanity Symbols, download from YouTube Description!!: CLICK ME TO GO BACK TO THE INDEX!!! 1 Link to comment Share on other sites More sharing options...
rgardner Posted April 2, 2020 Share Posted April 2, 2020 On 3/30/2020 at 8:46 PM, Renerabbitt said: POST 30 New tutorial for building showers efficiently in Chief X-12: CLICK ME TO GO BACK TO THE INDEX!!! Great explanation. I picked up a couple of tricks. BTW I do the same thing with my shower curb wall, and you can set it as a default to remove that base molding so you don't have to remove it from the room. Also I like your idea of making it a set room and am thinking you probably can remove the default molding in that room the same as setting your mud bed floor and changing your floor tile. Thanks Rene! Link to comment Share on other sites More sharing options...
Renerabbitt Posted April 6, 2020 Author Share Posted April 6, 2020 POST 32 Free CB2 Symbols, download from YouTube Description and please subscribe! CLICK ME TO GO BACK TO THE INDEX!!! Link to comment Share on other sites More sharing options...
shonaull1972 Posted April 12, 2020 Share Posted April 12, 2020 Thanks so much!!!!!! 1 Link to comment Share on other sites More sharing options...
Renerabbitt Posted April 20, 2020 Author Share Posted April 20, 2020 POST 33 Twinmotion is getting so popular that I had to dive in: CLICK ME TO GO BACK TO THE INDEX!!! 2 Link to comment Share on other sites More sharing options...
Michael_Gia Posted April 20, 2020 Share Posted April 20, 2020 3 hours ago, Renerabbitt said: POST 33 Twinmotion is getting so popular that I had to dive in: CLICK ME TO GO BACK TO THE INDEX!!! I’ve been enjoying your recent YouTube videos on TwinMotion. It’s great to see someone as well versed in Chief as you are, go through a discovery mode exploring this awesome tool. Keep up the great work! Link to comment Share on other sites More sharing options...
Renerabbitt Posted April 20, 2020 Author Share Posted April 20, 2020 3 hours ago, Michael_Gia said: I’ve been enjoying your recent YouTube videos on TwinMotion. It’s great to see someone as well versed in Chief as you are, go through a discovery mode exploring this awesome tool. Keep up the great work! Appreciate it, more to come hopefully by the end of the week. LOVE hearing this feedback, thank you 1 Link to comment Share on other sites More sharing options...
parkwest Posted April 20, 2020 Share Posted April 20, 2020 1 hour ago, Renerabbitt said: Appreciate it, more to come hopefully by the end of the week. LOVE hearing this feedback, thank you Always fun to watch a professional at work! ps. How did you get to be so smart? ;-) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now