dshall

Add 7/16" to the first wall between the brick and concrete

Sorry I did not answer the specific question very well, maybe somebody else with more knowledge will pipe in.

Ha! Thanks P., I thought that is what I read. I can have open risers if I pass the sphere test. It is so important to read and understand the ifs ands or buts.

Let me be clearer. Any word document goes in drop box, any spread sheet document goes into drop box, every CA LAYOUT goes in drop box, every CA PLAN FILE goes into drop box. My libraries do not go into drop box, program files do not go into drop box. Program files do not go into drop box because I ain't smart enough to figure out how to do it. Documents go into drop box because I know how to save a file and I know how to save it in drop box. I hope that is clearer. What is surprising is when I explain to my colleagues what a great system I have saving into drop box they say, "why of course, that is what I do" Again I was late to the party.

I keep all of MY DOCUMENTS on drop box. I do not keep the CA program files on drop box. I no experience keeping user library etc on drop box.

That's what I thought, but I was just reading the code, and it said they were allowed as long as a 4" sphere could not pass thru. I will double check.

Three interesting layers to play with, FLOORS, ROOMS, FOUNDATION......... they are the mystery layers

Back to the original question, it depends on whom is making the decision on whether it is a bedroom or not. Whether it is considered a bedroom will dictate: -Is egress required (building dept.) -is natural light required (building dept.) -is ventilation required (building dept.) -size of septic tank (health dept) -whether a real estate person can call it a bedroom (real estate board) -number of garage spaces (planning dept.) -number of parking spaces for apartment projects (planning dept.) -are smoke alarms required (fire dept.) -FHA loan requirements (FHA dept.) -property taxes (per Lew, did not think of this one) WOW, what an education, thanks guys.

Alan L. Posted a question about why he needs to post pics. I guess you did not read it.

Maybe you don't get it. I have had situations where I have had 10 points very close together and I only need two points. I used the area subtraction tool. Another way is the filet tool. BTW, how does acad do it?

Think about using the UNION,INTERSECT, and SUBTRACT tools to quickly eliminate excess points.

Thanks KT, something is amiss.

Yep, separate cabs is what I use. Are you on X6? I do not want to have to start a new plan from scratch so I am trying to find out if has truly been fixed with X6.

KBird, GW may disagree, but I think the easiest way to build these railings is with a 2D molding drawn in plan. You can attach top rails, bottom rails, and balusters/pickets. Build this molding one time, and then use it on your next job. Very easy to manipulate. You can move it further away from deck edge or closer in. It also typically will give the lines in plan that represent said railing. The only tedious part is putting on the newels, they are psolids. And once you have done that once or twice, it becomes second nature putting the newels in and again you have all the control you need. There is a vid on the method somewhere out there. I think it is on the old forum.

I don't think you need to have a closet to call it a bedroom. The health dept. looks at almost any room as a bedroom when it comes to septic requirements. Real estate people do their own thing. Think back a few years, hutches and chests were more common than closets yet they were still considered bedrooms. A bedroom does not need a closet to be called a bedroom.

Thanks for checking D. It must be unique to my legacy plans. I guess one day I will have to start a new plan from scratch.

I have an exterior set of stairs in front yard going up to a second floor deck. This is a private residence. Minimum tread is 10" if that includes a 1" nosing, if no nosing the minimum tread depth is 11"......... for stairs inside the house For public stairs the minimum tread depth is 11"... period, cannot be 10" even with nosing. Would you consider my stairs public or private, and if private, should I be able to get away with a 10" tread if I have a 1" nosing. The stairs will be open riser so I get the nosing by default. Thanks for the help guys. (CALIFORNIA RESIDENTIAL CODE)

Nuts, I may have to apologize, can not do it in a new oob plan......

Why don't triple face book shelves still not work? I don't get it. This has now been reported in several beta testing years and it is still not fixed. Isn't this an easy fix? Note that when cabinet is up against wall, there are no shelves in the two openings on the right.

My tool bar was doing something funny the other day...... And I don't touch it, OOB setting. Seems okay of late.

Ron, I had that problem this morning. I had to try about 6 different times before I got on. Seriously CA, the website seems slow, always having to log on, the website not recognizing me, getting frustrating. Getting closer to the tipping point when it's not worth messing with.

I appreciate the contribution, thanks Brinkbart.

No, what I do is the CEILING FINISH is enclosed in a room, where I have an opening, I use a doorway with casing suppressed, I do not use invisible wall.

Here is the plan where the ceiling joists for the DROPPED ceiling will not frame in 3d. The joists are there in plan, but not in 3d, this is weird. Take a look at the house on the right. clg jst wont frame.plan.zip

Here is a vid. Maybe you already figured it out. The mystery to me in this vid is why the ceiling framing for the FINISHED CEILING sometimes frames and sometimes not. Run into this before, had not notice the problem recently, but in this vid it resurfaces. Again my issue is trying to get the ceiling framing for a CEILING FINISH to frame. Another one of those elusive mysteries that we should not even have to discuss. http://youtu.be/dWrChSbf0U4 not a great vid by any means.