Joe_Carrick

I would just add a Molding Polyline along the exposed edges of the "Soffit-Roof" and specify the Crown Molding of your choice. Note that the Crown Molding may be on the wrong side but you can just toggle that. It may also be at the wrong elevation - just set the Vertical Offset.

I just use Ctrl-C to copy the text I want. Then in the RTB I just use Ctrl-V Works as expected. No Problem.

I have tried 1-1/2" Jamb Width and 1-1/2" Trimmers. Jambs are shown inside the 60" Window dimension Trimmers don't exist in CMU Walls Window shows in Schedule as 60" width Dimension to RO is also 60" Evidently Chief just doesn't know how to deal with a rough buck (trimmer) in a masonry wall.

I'm having trouble getting dimensions of my CMU walls to comply with my window sizes. Example: 64" wide CMU opening (8" Block Module) 1.5" trimmers .5" RO each side 60" Nail-on Vinyl Window I want the wall opening to dimension as 5'-4" and the Window Schedule to indicate the width as 60" What settings do I use in the window dbx to get the walls to dimension correctly?

It has to be done by using a single schedule and a custom field. I know it can be done because I've done something similar using the floor-number and simple_schedule_number attributes.

I can write the macros for you (for a fee) but I'm pretty sure you would need to upgrade to X11 for it to work. X10 might work but X9 doesn't have the required attributes. The windows would need to have a custom field which would then be used as a column in the window schedule.

The only way to do that is to use a custom macro.

There are attributes: floor_number simple_schedule_number that you can use in macros in your schedules and in labels. This works for Doors, Windows, Cabinets, Appliances, Fixtures and even to a certain extent for Rooms.

You can create your own Garage Door Panels to use. They are just Symbols Here's one I created some time ago. Glass Garage Door Panel.calibz

I make my wall layer line weights as follows: Both sides of framing = 18-25 All other layers = 2-5 This works well for me both when the Line Weights are ON or OFF

Scott, I don't know if this will work, but try putting the note schedule in a CAD Detail. That way you should be able to control the scale independently from the plan. You will have to send the schedule to Layout separately from the plan.

Any Molding can be used as a casing on an opening, a baseboard, a crown molding, etc. 2D Molding Profiles act as extrusion shapes. 3D Moldings represent a repeated 3D geometric object rather than an extruded shape. A 3D Molding Polyline is a totally different animal in that it describes a path that is in more than one plane.

The "Plan Check" tool isn't a "Code Check". It flags a lot of things that have nothing to do with building codes. Wall alignment floor to floor Telephone Outlets Television Jacks Wall Layers - inside vs outside etc. Have you noticed that handrails and guardrails are not required for stairs in some countries? Even in California there are many residences that don't comply with current codes: Railing Heights Baluster Spacing Egress Windows Insulation etc. The codes evolve and older structures are simply ignored even when a home is remodeled or sold it's not required to meet current codes. The best thing is to know the codes you need to comply with and make sure you design to those standards. The "Plan Check" tool isn't a "Code Check".

I would probably have used some reflectivity - maybe 30% - just for more realism.

Change material reflectance.

Please post your plan - or at least a picture. Generally the hardware is set to be attached to the doors or drawers at the thickest part. If you are putting them on a recessed panel you will need to offset the hardware origin.

Here's my Wall Schedule. It's mostly custom macros it custom fields. The macros actually examine and report the wall layers.

You will have to build the pool out of solids using the Boolean operations. Then make it a symbol that creates a hole in the terrain. The water can be a thin semi-transparent surface with a water texture.

Ask your questions in the Q&A Forum. Tips and Techniques is where you share your methods.

Just create a CAD Block of the existing Site Plan [ CAD Detail From View ] and place that in the plan for the new home. - or - Go the opposite and just superimpose a CAD Block of the new home on the existing's Site Plan. Either of these will work - I would personally opt for the second.

I had created a 3D Molding Symbol but it only worked for a specific soffit size.

You really need to add a Ceiling Finish. Click on the Edit button and add 1/2" drywall or whatever your ceiling will be. You can even add a second material such as a paint color if you want.

OK, I understand. It's the same with Windows. IMO this is a bug in the software but it may be there to prevent execution of the macro while in edit mode.

I can edit with or without that box checked. Maybe it's just a bug in the MAC version.

Please don't use the "Tips & Techniques" forum for these Symbols. The correct forum to use is "Symbols & Content".