Joe_Carrick

OK, so here's the trick: 1. Place a Door in a Plan 2. Select it and open the Components Dialog 3. In the Comments Field enter (Existing to Remain) or whatever information you want. 4. Add the Door to your Library and Name it so you can recognize it Any time you place that door in a Plan, that comment will come along and be a part of the Schedule information.

Zowie, Sorry, I misunderstood what you were wanting "(E) = existing". I sometimes use different Schedules for Interior vs exterior doors but there's no real designation in the Schedule of Existing vs New so I either suppress the Labels and/or Exclude the existing from the Schedule. Perhaps a comment could be added in the components of a door stored in the library.

Kevin, It's a little different - it only clips thraming members so you still get all the architectural stuff beyond but no framing members beyond the clip distance.

Since I didn't know it was there, I hadn't used it. Thanks for pointing this out to me - now I will definitely use it. It's a great way to eliminate a lot of annoying detail in Cross Sections. I like a setting of about 24 so that I pick up just 1 set of framing members from the Camera location. Now that I know about it - don't you dare take it away.

Edit the information in the Schedule dbx - even better, set it all up in the Shedule Defaults and in the Door Defaults.

Pretty simple. Just delete the perimeter walls that Chief created for the new floor of the existing house. You will still have the "Floor", but the Roof will be where it was. It works the same way if you have a 2 story house and a 1 story detached garage or guest house.

Barton, I reported this to Tech Support and also to Scott Harris and others at KBIS/IBIS last February. I think I also reported it during Beta to Brian and I'm pretty sure I got a confirmation from him. Unfortunately, confirmation from Tech Support doesn't always mean that it'll get fixed.

Post the Plan

Larry, Try snipping a bit of the Siding (without the lap lines) and save that as a texture. Then apply that to the trim. It should be pretty close.

Most Likely you have two Door Schedules and two Window Schedules in your Plan. The other possibility is that each schedule has both Doors and Windows included.

Sorry Guys, you miss the point. Generating a new 2D Block doesn't solve the problem of matching the x/y 3D origin and hte x/y origin of the 2D Block. Try this simple exercise: 1. Create a 12"x12"x12" cube 2. Convert it to a Symbol (fixture, hangs on wall) and set the 3D origin to y=-6 3. Create a Room and place the Symbol against one of the walls In 3D the symbol will be 6" away from the wall, but in Plan View, the 2D Block will be right up against the wall. Generating a new 2D Block will not change that and I've not been able to find anything that will. Even editing the 2D Block and modifying it's x/y values doesn't make any difference.

No problem Scott - I love you too

If you are using X6..... It's real easy.

Kirk, I LOVE YOU!!!!!!

I just got a new laptop and after installing Chief I synced my other computers. Unfortunately, the new laptop user library had a later date than the one on the other computers. So now my user library is empty. I don't have a backup that I can find. Does anyone have any idea how to recover this?

I avoid editing in Layout as much as possible. Positioning and cropping & maybe a small amout of masking out unwanted items that get thru. But ingeneral, I do everything in the Plan - notes, reference callouts, etc. mostly in the Camera Views.

That window in the OPs original post is an Andersen Unit Bay Window. It's a pre-manufactured unit. I have developed Symbols for these and they should be able to be used in Chief as "Projection Windows". Unfortunately, X6 didn't quite get it right and there are problems with the opening being properly sized and finished. Currently the method that works best is to apply one of the Symbols as an exterior furniture or fixture item and create the opening behind it using a "Pass Thru Window". -Joe

I found that by converting a straight section to curved - I can then snap additional straight sections and they snap together. Interestingly, creating a "Clck Curved Stair" - I can't get it to join to a straight stair section. IAE, I have a solution.

What's the trick to get a curved stair section to connect to a straight section? I know that with landings we need to build the landing attached to a stair section - but I can't figure out how to force the curved section to link.

I don't know if it would work, but you could try making the center cabinet counter top 1/6" thicker.

1. Place the Symbol in a blank plan. 2. Dispaly it in 3D and use Transform Replicate to resize it. 3. Convert it to a new Symbol (Electrical, Ligtht, Hangs on Wall, Set height from Floor) That should handle everything. As mick said, it was probably a scale problem with the original symbol. If the above doesn't take care of the 2D Block then you can resize that as Perry indicated.

Nana will object......

Sorry, you can't delete them once they are in the plan. Chief comes with certain line types that are in all plans. If you just want to have the most common that you use: 1. Create your own and place a "_" at the beginning of the name. Those should all show up at the top of the list.

Lew, As long as the drive me home after drinking - it's OK!

I think you can solve that by using a different Wall Type for the railing (a different wall thickness should do it). Another possibility would be a different height wall (shorter) on the left - run it to "C" from the left - then run the wall on the right up to the one on the left..