BrownTiger

Just .02. 1) Have you tried exporting as rxl (rescheck) and importing into Rescheck to get the building envelop. 2) If this is for HVAC, heatcad "30 days" can import and calculate quick load based on ACCA MJ8 free. I am not an architect and this is my hobby.

>Windows XP is still the third most used operating system worldwide but I would NEVER use it for internet browsing as it has way too many security weaknesses for that these days. The weaknesses were not just in a browser, but network drivers (SMBv1). If you use file shares XP can only do v1s. But there are also countless security issues. I would not recommend.

First lock the pitch and set you fascia height to 110 7/16". Now lock the fascia height and set your pitch to 4:12. Practice, practice, practice.

In theory you could get a hasp driver from http://www3.safenet-inc.com/support/ and create shortcut and set compatibility mode. But I do not have a slightest clue what 9.5 version is...

> Fit to paper locks the computer up DavidJPotter is exactly right. Fit to paper in order to Print to Scale makes no sense. I suppose it is complicated layout with plan and your hardware can not handle it, or may be it is an outdated driver. My advice would be to switch to Print to PDF, and see if this works. Do not use FIT to paper. Your printer should be able to handle A3, and your layout page size should be set to A3. Fit to paper is designed for images.

Mine had a different issue that took at most 2 minutes to fix after nearly 4 hours installing tha Windows Creators Update. Due to WannaCry ransomware had to run update assistant to get latest patches. It upgraded Windows 10 to 10.0.15063. No problem there. ChiefArchitect would not open complaining about two DLLs: vcomp140.dll and msvcp140.dll claiming c:\windows\system32\vcomp140.dll image is invalid or corrupt. This issue was related to update assistant upgraded these 64 bit DLLs with 32 bit versions. To solve place 64bit versions into your C:\Program Files\Chief Architect\Chief Architect Premier X* (64 bit)\ folder. BT

Randy, this is not a difficult task. Open your plan 1) Turn the "Roof, Planes " layer on. 2) Connect roof planes 3) Select each plane of this porch gable and set same height as a fascia height of your main roof. In this case it is 110 7/16" 4) Select planes at the ridge and use "2" to connect them. I am not 100% sure what ceiling you intend to put. If you check with the room porch DBX. You ceiling height is set at 169". That will create a nice exposed vault. If you want a flat ceiling you need to set it to something like 96" BT

Edit > Preferences > General > Folders > "Show ..." Manufacturer Library Folder

Why does moving a door label, fixture label, etc. in an elevation view force a rebuild? I would think a label could be treated like CAD objects - they simply "overlay" the model and only require a screen refresh - not an entire model rebuild. Because sometimes it is too difficult to figure-out an impact on view when generic multi-facet -object moved from place A to place B. It is much easier to invalidate the area and call repaint. The trick is normally to minimize the impacted area of repaint. CA ( Dermot?) previously stated that they already use numerous optimizations of this process.

CA Material List is not very good. I posted countless times. Saying this... You probably can define multiple materials "Concrete-300psi - 2- #5rebar - cont" material types.. Go into components Uncheck "use" existing rebars, create [add] general category accessories your own rebars set measurements per ft.

It works in RichText, but painful. 1) I suggest enable EnableHexNumpad in the registry, so you can use ALT+x 2) Try in the wordpad type: C0<ALT-X>. Result can be pasted into ChiefArchitect rich text field. 3) Here is UTF table with al the values. http://www.utf8-chartable.de/ ---- I agree with what Alaskan_Son said. There is also the suggestion forum here, ask for standard Text fields to support Unicode. ÀÆ

I think the discussion was about Ruby not compiled with the proper Unicode Support. I believe QtTextEditor control supports unicode by default.

They think you would use Alt+2104 or past it from wordpad.

File >> Backup Entire plan >> attach the plan to your post. Most of the times Auto-roof does not adjust correctly, some small manual intervention is required. However building/fixing roofs in CA is not that complicated...

If this is multi floor plan create schedule per floor and place each section into different cad detail.

Insert them in the plan and change the scale factor. So instead of 1/4" - 1' , specify 1/8" - 1' (and half the size).

First have you experienced same crashes with x8? Verify Windows, I would run repairs 1) sfc /ScanNow 2) DISM /Online /Cleanup-Image /RestoreHealth /Source:repairSource\install.wim I would also check the video drivers... If you have accelerator card and not Intel built-in a) Make sure that the drivers are updated b ) You are set to use accelerated hardware

Select framed wall, Hit "Open Wall Detail", when details opened turn framing Labels layer on. Do you see T* labels. Now check the framing schedule.

Good catch, but I think it will work since: It is an existing door ( I doubt that he needs an existing door in the schedule. And if he does place it some place else offscreen). My suggestion turning door off, and door header on

What is wrong with turning door off, and door header on? Make door header solid line?

you can not upgrade x2

It is all in the eyes of beholder. Some people love partial / half pitch, some hate it. It adds a little cost and wind resistance. Partial hip is created by specifying on the gable wall / roof upper pitch. Dutch hip, I create them by adding opening (hole in the ceiling platform ), adding attic wall to go threw the hole and fixing / adding roof planes. 40 seconds tops.

> I want to do an enlarged plan of the kitchen. I do not know what that means... Your plans are always in the live scale, when you send data to layout, in the layout you "enlarge" by specifying 1/2" - 1' or 1" - 1'. If you want elevation cameras to show a wall or kitchen island - you create them.

DSH spent a bit of time on the subject.... https://www.youtube.com/results?search_query=dsh+chimney

Not everyone has ESSET antivirus, so I do not know if Mark suggestions will work for you... But if your windows 10 behaves weird [other than normal weird], run from the elevated command prompt DISM /Online /Cleanup-Image /RestoreHealth