Kbird1

As Allan mentioned Larry for P's trick to work the Soffits must be ON.... Allan's settings Posted July 19 I think I got it. Soffits have to be active but cheating the eave sub fascia to tiny gets the look.

Seems like there is always tips to pick up on the Forum, one of the reasons I continue to come here when can, I'm sure Ive learnt as much here as from the Docs over the years. Mick.

Changing the Material to say Color - Brown ( or your favorite BM or SW Color ) didn't used to work as Chief needed a "Framing Material" to Frame, but I think it was X15? that changed and you may not need to blend any more actually as they changed the way Chief Framing worked. Blending is more like staining the Fir , so a light Color would still show the woodgrain, whereas a Solid Color may work better these Days so instead of "Blending" just switch to your Chosen Color and try it instead. M.

Just the Rafter Tails ? I'm not sure that is possible , but you can still Blend Color with the Fir Material as usual , such as below ( just used yellow cos you used it in 2014 ), doing so may turn off the the Auto Roof Build , and you may need to use Edit all Roof Planes for Existing Roof Planes and then match the Color in the Structure Tab again in the Roof Plane Defaults (Build Roof > Materials) there is likely a better way? as it's a bit like chasing your tail. are you on X16 or X15 though?

you'll have to provide more info and some images of the problems to help.... Mick.

The only other Time I remember it happening to me was when "something" happen with a Wall Cabinet, but TS found the Issue and it was fixed in the next update. M.

actually I am finding AI makes a mess when increase resolution, size of pics as it's "guessing" in a lot of cases and seems to blur/blend many elements, even though the image is bigger..

Thanks Ben, you may want to have Nigel update the Documentation , and perhaps you can update the Video on this topic and cover it in a bit more depth for everyone, as it seems counter-intuitive to me at least to uncheck "Active Window" after Framing your shot etc and that's not mentioned in the Docs either, what I was thinking seems to be reinforced by the 1st 60 secs of the current video linked above. M.

Any chance you have turned off Auto Rebuild for your Terrain Perimeter (TP) ? only thing that comes to mind off hand as I don't think auto framing off cause that, perhaps as TS though as likely they have it in the reported Issues. M.

At the Default Settings for an export of the Active Window, except the DPI , which ! use 300 DPI with Pixels not Units the files are 200-500Kb in Size and the Snipping Tool does about the same and I find I sometime prefer the Snipping Tool Images for some reason. At Chief's Default settings with 72DPI ( which is web browser standard of old ) things look blurry on my 2K monitor, but I found 600DPI doesn't change much as far as "Resolution" visually on a Monitor, for a Graphic Artist it may indeed be better. The Big difference, is seen when you Set the Default Pixels to Units , then the File Size and Resolution can be nearly unlimited , and file sizes massive as you noted BUT visually if viewed on a monitor or in a Layout PDF, I don't see much real difference , so I think the OP would need to know what Standards and Size the Graphic Designer Needs before outputting, and some skill at post processing is likely a good thing as well. I may have missed it somewhere in the Manual but I don't think the need to Set Pixels to Units do do this is mentioned, just that it "alters size" but this is a screengrab for those not familiar with it....

I have use Topaz Gigapixel for 3-4 years , but this year they released Topaz Phot AI which incorporates their 4 former Apps, Gigapixel is the only only one still being developed on it own now though. TOPAZ LABS

I'd say copy your post into a TS case with these example plans and let them look at it , as Dormers can be a lot of work and really shouldn't be. * you are right I didn't catch Chief Autowalled the upper LH side with a 2x4 Attic Wall previous plan has it as 2x6 I believe. M.

This does work in newer versions perhaps X15 and X16 ? now hence the adding Signature Tip, I was assuming that if that didn't work , they must be using an older version, but maybe they just aren't aware of the Setting either? M.

Not recently, as it hasn't in the Past , Screenshots with the Snipping Tool do as good or better, I found, hence the Comment as believe me I have tried. Maybe it is working better in X16 ? M.

Hmmm not a legitimate Question DB ? M

If Photoshop or the Free Gimp are not you thing, give PixPlant a try , I think there is a trial version and the cost is low for single practitioners with special pricing. PIXPLANT M.

Have you tried it in X16 ? I haven't but it didn't really used to make much difference in the past that I noticed..... the default exports are a bit lacklustre. M.

Hi, Unfortunately no, you are not missing a setting, Auto Panels do not Dimension , you have to use small CAD lines ( make them look like Ext. lines ) or make yourself some End Panels from the Appropriate Cabinet Type, 3/4" thick and save them in your User Library and then drop them into plan from your Library. there are Threads Here on doing that. A Tip from Me would be to add your Forum Signature as so answers are Version specific , see Mine below , but knowing OS, Chief Version and sometimes Computer hardware is useful.

Not really for onscreen Viewing unfortunately, but you could add this as a suggestion for higher Res. exports over in the Suggestions Forum, but that maybe a Standard Camera and PBR will look better , but lighting will need to be worked with. M.

Late to the Party but PM me if arrangements fall through, thanks. Mick.

I think you could just use 2 different Wall Materials Regions for this , with two slightly different materials , same as you would for a Field Tile with a decorative Band or Stripe. M.

The Rendering Artist might know, Jintu goes goes by the Name Chiefer Here , but no way to know if that is one of his designs or a Clients ? @Chiefer I'd start with a standard wall , and use a Passageway off the Door Menu and give it an arch top and configure the Casings as needed, then do the Columns out of Solids, as the don't interact with the walls and mess things up. Mick.

Try the Western Canada User Group, this guy is in Campbell River by the look

Try tagging Him Here.... @Renerabbitt

Hi Gene , sorry busy week , I just had a quick look and fixed things up, but it's not Automatic for sure in this case, I haven't looked at Steve's plan, I just wanted to have a look at this myself but unfortunately I don't really have any Insights for you, it was just 20-30 mins trying stuff until one fix didn't ruin another. Mick. Latest X16 Version PLAN : Glenrock_MHD_Fix.zip