Renerabbitt

Members
 View Profile  See their activity

  • Posts

    4873

  • Joined

  • Last visited

 Content Type 

Everything posted by Renerabbitt

  1. Renerabbitt
    lost me at "upwork" Terry I don't know the type of work you do and the budgets you work with but as soon as someone mentions HGTV Fiverr Pinterest or Upwork I run for the hills. To me, and this is relating my own experience, you are saying that you want the lowest cost possible. To me, making that Titanic look the way you want it, is not a low cost endeavor.
  2. Renerabbitt
    couple years maybe...
  3. Renerabbitt
    this is the Ai: and the prompt I gave was this rendering from Chief: and then the text: home with mountain range behind it done in the style of watercolor by Thomas Schaller. The scene should be in the fall with tress on either side of the building. The driveway as a grid of exposed aggregate concrete.
  4. Renerabbitt
  5. Renerabbitt
    POST 102 #freesymbolfriday for #ChiefArchitect in The Rabbitt Design Feed Thanks to Caleb Watkins who funded some of these materials, We've got a Japanese Architecture Theme Pack. If you find that I have named something incorrectly please do correct me Some Japanese Cedar, mat, Shou Sugin Ban chipped or burnt, some stone, weathered wood and more get it as always at rabbittdesign.net/symbols or direct at Rabs Japanese Themed Material Pack-1.calibz Follow this link for the Rabbitt Design FB Feed for additional content: https://www.facebook.com/groups/3195137837435026/permalink/3207137419568401/ CLICK ME TO GO BACK TO THE INDEX!!!
  6. Renerabbitt
    Chief Architect PBR:RTRT:30 denoised rendering and then used Chief Vector rendering with StableDiffusion:ControlNet:Inverse+Canny:RealisticV2:DDIM then masked the Stable Diffusion out around the PBR rendering. In Ps added Neural Filter-Focal blur and Camera Raw with a fur brushed fade. Timing for ChiefArchitect/StableDiffusion/Photoshop in minutes was 1/8/10 so under 20 minutes.
  7. Renerabbitt
    I don't really understand what the benefit of opening in a text editor adds. This introduces liability as it is no longer actively linked to page information. Simply having dummy sheets in your template layout works quite well. Have a separate layout template for each separate engineer that you are using, or simply say S sheets attached and ask your engineer to include a page index on their S sheets
  8. Renerabbitt
    Pasting this response which was to your same post on FB I would ask why you arent changing the label in the label panel? To answer your specific question, the formula panel is where you could change the label in this case. But this is only changing the label for a material list, not for the plan view or schedules
  9. Renerabbitt
  10. Renerabbitt
    You have that element in a horizontal section which dictates the height, it is not in a separate section. You would need to split the parent vertically and put your door there
  11. Renerabbitt
    I think there is a much simpler method to do what you are looking for. Apply a box eave and apply a material to it, designate the size of the material based on the pattern and then in the material list set it to linear and update from pattern Then simply pull a material list Is that what you are trying to do?
  12. Renerabbitt
    Shazia Kitchen.jpg

    From the album: PBR Chief Based Renderings

  13. Renerabbitt
    Download this version, I improved it
  14. Renerabbitt
    POST 101 A package of tile materials to celebrate 1K group members. Please share your renderings if you use these, we would LOVE to see them! Most of these have patterns associated with them which can slow down your machine. Make sure to turn the patterns to none if thats the case Download direct at Rabs 1K Milestone Tile Pack.calibz or get it at rabbittdesign.net/symbols Follow this link for the Rabbitt Design FB Feed for additional content: https://www.facebook.com/groups/3195137837435026/permalink/3207137419568401/ CLICK ME TO GO BACK TO THE INDEX!!!
  15. Renerabbitt
    Nice try, subway and shaker is never going away, you've clearly never been to Kingway Cabinets
  16. Renerabbitt
    Joe I think a lot of people still ping your old email addresses, I've heard from a few users that they cant get ahold of you and I try and correct their contact info
  17. Renerabbitt
    This is how it showed up when I opened it in X15
  18. Renerabbitt
    https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/legion-series/legion-7-16arha7/82uh/82uh0001us/pf3zh50m
  19. Renerabbitt
    I have two laptops, one with DDR4 and one with DDR5, I don't know what the tests show..I just know I wont go back to nearly an identical laptop , this one with the DDR5 is soooo snappy..I won't even use my desktop with a 4090, thats how much of a difference I feel
  20. Renerabbitt
    Please tag or quote me, I only randomly came back to this to check on it. You are showing automatic fillers on the left and right, that can be turned off in general cabinet settings. Separations are within the Front/Sides/Back panel of your Cabinet and is a different thing entirely. I wouldn't bother with this, we are all experienced architectural drafters here and plan view handle hardware isn't giving anyone any pertinent information. Provide an elevation with annotations for your handle hardware So you want the sani pipe to be in cabinet? This should suffice
  21. Renerabbitt
    The California Premium
  22. Renerabbitt
    Revert your cabs to default and this would be easy, otherwise do it on a cabinet by cabinet basis for those cabinets with the same face configuration using the match properties tool Match Properties Tool with Face Configuration then make your edit Change the Line Style for the Cabinets, Door Drawer within the Layer Set you are using No, why would you want to?? do this in elevation. You could hand place all hardware in plan but this would not be useful to a shop or builder Have a diagram? this didn't make sense to me We can dimension to openings, show an elevation with openings and dimension it 3d moldings if you must show it in 3d, otherwise simple CAD or just a note should get you there.
  23. Renerabbitt
    Please provide a plan file, wayyyyyy easier to address your questions as I would go about offering solutions more based on your plan than your stated intention. Sometimes there are better ways than what you are looking for.
  24. Renerabbitt
    Hello Aloha, Thank you for the lead! I appreciate it. With my experience, expertise, and reputation in this software, I believe I can bypass the application process. I usually bid for contracts, given the opportunity cost on margin for hourly gigs. While my hourly rate is $20,000 I understand that it might not be suitable for everyone, haha, and I am willing to negotiate. Rest assured, I am able to work efficiently and effectively with this software, and I am confident that I can meet your prerequisites without any issues. If you are interested, please let me know if you would like to schedule a call and I can give you a proper bid after review.
  25. Renerabbitt
    Soooo AC, haha, if you give me a smidge of patience on email responses I could've helped you out, poking fun but I think you asked me about this this morning. Para-CAD you own my pro template as well so I'll show you its just a quick settings change in the schedule. You would simply make a separate schedule for each continuous wall and include the column "perimeter" Not as advanced as Joe's system though 230425-Compressed.mp4