Dennis_Gavin Posted March 9, 2016 Share Posted March 9, 2016 Got an update this morning for X8 but don't see it mentioned in the announcements or any description of what it fixed. Link to comment Share on other sites More sharing options...
dshall Posted March 9, 2016 Share Posted March 9, 2016 Got an update this morning for X8 but don't see it mentioned in the announcements or any description of what it fixed. I did not get update. My version is the screen shot. Link to comment Share on other sites More sharing options...
Dennis_Gavin Posted March 9, 2016 Author Share Posted March 9, 2016 since you showed me yours I'll show you mine....;o) You are on a MAC right? Maybe only for Windows? Link to comment Share on other sites More sharing options...
Greg_NY61 Posted March 9, 2016 Share Posted March 9, 2016 They didn't make it into work yet to post the update notes. Link to comment Share on other sites More sharing options...
jscussel Posted March 9, 2016 Share Posted March 9, 2016 Update notes are posted next to the download button on CA web site. Link to comment Share on other sites More sharing options...
Joe_Carrick Posted March 9, 2016 Share Posted March 9, 2016 The bug reported in https://chieftalk.chiefarchitect.com/index.php?/topic/8209-stair-height-vs-floor-height-in-x8/#entry76190 has not been fixed. Link to comment Share on other sites More sharing options...
Dermot Posted March 9, 2016 Share Posted March 9, 2016 The recently posted update only corrects a couple of important issues that were in 18.1 that were not in 18.0. Link to comment Share on other sites More sharing options...
Joe_Carrick Posted March 9, 2016 Share Posted March 9, 2016 Dermot, When can we get this one fixed. It can really cause problems with the ConDocs, creating a situation where the stairs can be built such that they don't comply with code. This is not something we as designers want to deal with. It's expensive to fix in the field. It could result in a stairway having to be rebuilt at our cost. I pay for Errors and Omissions Insurance - but I don't want to have to use it. BTW, I just determined that any intermediate Landing Heights are also incorrect. Link to comment Share on other sites More sharing options...
HumbleChief Posted March 9, 2016 Share Posted March 9, 2016 I think it's really important that Chief get its software accurate and correct but I'm a bit confused by the need to have stairs measured and calculated absolutely perfectly for a builder - in the plans. I understand the argument but I've never seen a builder begin building stairs without measuring the actual height of the landing above and using his common sense, simple division, and building skill, build a stair that fits, and is built to code. If I had a builder who came to me after the fact and said my plans showed the risers to be 6 11/16" and I built them that way and look they are 1/2" too high at the top of the stairs, I would encourage that builder to find a new line of work - yesterday. Doesn't mean Chief shouldn't get it right, but if this is a real work place problem then having Chief be perfect in this regard is not going to solve the obvious deeper issue. Link to comment Share on other sites More sharing options...
Joe_Carrick Posted March 9, 2016 Share Posted March 9, 2016 Larry, If we're just talking about a wood framed stair built in the field I might agree - but I would want a very strong note on the plans stating that the contractor verify all dimensions and report any discrepancies before fabrication. OTOH, when it's a prefab (shop built) stair it's a different story entirely. Then it needs to be exact and shown on the plans. Most building departments are very strict about adherence to code for stairs. I know that many users don't consider Chief as software for commercial buildings - but I'm not one of them. Yes, it seems to be best suited to frame construction but there are users who don't shy away from concrete, masonry or steel frame buildings of 3 or more stories. I've done Hospitals - many years ago all drafted by hand - that could easily have been done in Chief and I have absolutely no problem with doing commercial projects today using this software. 1 Link to comment Share on other sites More sharing options...
HumbleChief Posted March 9, 2016 Share Posted March 9, 2016 OTOH, when it's a prefab (shop built) stair it's a different story entirely. Then it needs to be exact and shown on the plans. Good point. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now