djhplanning Posted February 4, 2022 Share Posted February 4, 2022 I'm having trouble finding a setting to control how my exterior wall is placing itself to the sill plate vs. sitting on top of the subfloor. Something changed on my template file that I use. The floor system is inset from the exterior wall. I've tried looking through both wall, floor and framing system settings and can't seam to find the correct setting. Link to comment Share on other sites More sharing options...
djhplanning Posted February 4, 2022 Author Share Posted February 4, 2022 I did check the build foundation settings. The only thing I found that may have influence was foundation wall defaults, platform intersections both set to automatic, and doesn't seam to change if set otherwise. This is when the problem happens though, when adding the foundation. Link to comment Share on other sites More sharing options...
MPDesign Posted February 5, 2022 Share Posted February 5, 2022 How about the wall settings 1 Link to comment Share on other sites More sharing options...
robdyck Posted February 5, 2022 Share Posted February 5, 2022 19 hours ago, djhplanning said: I did check the build foundation settings. The only thing I found that may have influence was foundation wall defaults, platform intersections both set to automatic, and doesn't seam to change if set otherwise. This is when the problem happens though, when adding the foundation. You need to post the plan so someone can review the settings within that plan file. Is that something you can do? Link to comment Share on other sites More sharing options...
Kbird1 Posted February 6, 2022 Share Posted February 6, 2022 A Plan would help , another possibility is the Wall Definition and where you have the Platform building to? Link to comment Share on other sites More sharing options...
djhplanning Posted February 8, 2022 Author Share Posted February 8, 2022 On 2/5/2022 at 6:44 AM, MPDesign said: How about the wall settings Link to comment Share on other sites More sharing options...
djhplanning Posted February 8, 2022 Author Share Posted February 8, 2022 settings here are set to automatic Link to comment Share on other sites More sharing options...
djhplanning Posted February 8, 2022 Author Share Posted February 8, 2022 On 2/5/2022 at 6:57 AM, robdyck said: You need to post the plan so someone can review the settings within that plan file. Is that something you can do? Here is the plan. Northland-Fledge-Existing 2-4-22.plan Link to comment Share on other sites More sharing options...
SNestor Posted February 8, 2022 Share Posted February 8, 2022 On 2/4/2022 at 11:54 AM, djhplanning said: I'm having trouble finding a setting to control how my exterior wall is placing itself to the sill plate vs. sitting on top of the subfloor. Something changed on my template file that I use. The floor system is inset from the exterior wall. I've tried looking through both wall, floor and framing system settings and can't seam to find the correct setting. Dan - quite a simple issue. Watch the video....it's the little things in Chief that can drive you crazy Dan Heid - Floor Framing Issue (Wall Definition Problem) - Watch Video 2 Link to comment Share on other sites More sharing options...
robdyck Posted February 8, 2022 Share Posted February 8, 2022 @SNestorNice explanation Steve! 1 Link to comment Share on other sites More sharing options...
djhplanning Posted February 10, 2022 Author Share Posted February 10, 2022 On 2/7/2022 at 8:52 PM, SNestor said: Dan - quite a simple issue. Watch the video....it's the little things in Chief that can drive you crazy Dan Heid - Floor Framing Issue (Wall Definition Problem) - Watch Video Thank you Steve Nester! This seams to have taken care of the problem. I just don't understand how this would ever have gotten changed in my template file because it's never been an issue for me before. Link to comment Share on other sites More sharing options...
Ridge_Runner Posted February 10, 2022 Share Posted February 10, 2022 2 hours ago, djhplanning said: I just don't understand how this would ever have gotten changed in my template file because it's never been an issue for me before. Gremlins! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now