Doug_N Posted October 28, 2021 Share Posted October 28, 2021 This is actually a problem I am having. The image on the left is cad work, and the one on the right is CA generated stairs. Can the one on the left be generated using CA? I can't seem to do it. Link to comment Share on other sites More sharing options...
rgardner Posted October 28, 2021 Share Posted October 28, 2021 Needs a wall to build up to on the sides. Link to comment Share on other sites More sharing options...
Doug_N Posted October 28, 2021 Author Share Posted October 28, 2021 Hi Ryan, The problem is a bit more complicated than that. Here is the architect's ask. CA's generated solution. Also I have the problem of putting a center railing in this plan Link to comment Share on other sites More sharing options...
Chopsaw Posted October 28, 2021 Share Posted October 28, 2021 Manual Railing. Anything else required ? Link to comment Share on other sites More sharing options...
Doug_N Posted October 28, 2021 Author Share Posted October 28, 2021 2 minutes ago, Chopsaw said: Manual Railing. Anything else required ? Chopsaw, How did you do that??? Amazing. Link to comment Share on other sites More sharing options...
Chopsaw Posted October 28, 2021 Share Posted October 28, 2021 Straight Railing set to "Follow Stairs" Link to comment Share on other sites More sharing options...
Doug_N Posted October 28, 2021 Author Share Posted October 28, 2021 The other thing is that the end railings have to be 180 Degrees apart as well Link to comment Share on other sites More sharing options...
Doug_N Posted October 28, 2021 Author Share Posted October 28, 2021 1 minute ago, robdyck said: One must assume its a triple shot of astra zeneca, pfizer and moderna which everyone knows unlocks the intended and powerful digital interaction of the vaccine. Oh oh. LOL Link to comment Share on other sites More sharing options...
Chopsaw Posted October 28, 2021 Share Posted October 28, 2021 19 minutes ago, Doug_N said: The other thing is that the end railings have to be 180 Degrees apart as well 57 minutes ago, rgardner said: Needs a wall to build up to on the sides. I think Ryan is correct but not sure of the details ? @rgardner Link to comment Share on other sites More sharing options...
Doug_N Posted October 28, 2021 Author Share Posted October 28, 2021 I can't see a way of putting a wall there Link to comment Share on other sites More sharing options...
robdyck Posted October 28, 2021 Share Posted October 28, 2021 6 minutes ago, Doug_N said: I can't see a way of putting a wall there Did you post a plan? Link to comment Share on other sites More sharing options...
Doug_N Posted October 28, 2021 Author Share Posted October 28, 2021 Here is the plan file5 Sided Stairs.zip Link to comment Share on other sites More sharing options...
rgardner Posted October 28, 2021 Share Posted October 28, 2021 48 minutes ago, Doug_N said: I can't see a way of putting a wall there Place a wall on the level below the deck. Use a single layer wall type with the “opening no material” material. Link to comment Share on other sites More sharing options...
rgardner Posted October 28, 2021 Share Posted October 28, 2021 Other option is to have a lattice layer if you are going to put it on the underside of the deck anyways. Link to comment Share on other sites More sharing options...
Chopsaw Posted October 28, 2021 Share Posted October 28, 2021 55 minutes ago, Doug_N said: Here is the plan file I think you may also need to offer a reward. It seems you need not just a wall but room definition as well but then you also get other surprises as one might expect. Link to comment Share on other sites More sharing options...
glennw Posted October 28, 2021 Share Posted October 28, 2021 Firstly, I think you need to clean up the geometry and get things accurate. Your cad guide, walls and stairs don't appear to be snapped to each other correctly. The joining of the stairs to other stairs is controlled by the Allow Rap setting. The extension of the stairs at each side is controlled by the Winders setting. But...to get the winders setting to work, the stairs have to be in a room. So you need to create an invisible room. But....I can get the winders to build on one side, but not both. Link to comment Share on other sites More sharing options...
Chopsaw Posted October 28, 2021 Share Posted October 28, 2021 7 minutes ago, glennw said: The joining of the stairs to other stairs is controlled by the Allow Rap setting. The extension of the stairs at each side is controlled by the Winders setting. But...to get the winders setting to work, the stairs have to be in a room. So you need to create an invisible room. But....I can get the winders to build on one side, but not both. That helps but as soon as I create a room I loose the Rap but can achieve two Winders for some reason. Too bad you can't edit stair treads like decking boards. That would solve the problem pretty quick. Link to comment Share on other sites More sharing options...
glennw Posted October 28, 2021 Share Posted October 28, 2021 Firstly, I think you need to clean up the geometry and get things accurate. Your cad guide, walls and stairs don't appear to be snapped to each other correctly. The joining of the stairs to other stairs is controlled by the Allow Rap setting. The extension of the stairs at each side is controlled by the Winders setting. But...to get the winders setting to work, the stairs have to be in a room So you need to create an invisible room. But....I can get the winders to build on one side, but not both. Link to comment Share on other sites More sharing options...
Chopsaw Posted October 28, 2021 Share Posted October 28, 2021 2021-10-27 11-37 PM.mp4 Link to comment Share on other sites More sharing options...
rgardner Posted October 28, 2021 Share Posted October 28, 2021 28 minutes ago, Chopsaw said: 2021-10-27 11-37 PM.mp4 7.9 MB · 0 downloads Not at my computer to test it but I think it had something to do with the level the room was on. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now