rlackore

Professor, you are clearly an old AutoCAD user, with your talk of paper space and model space. I am very often victim to what Perry mentions - I forget that in CA I don't have to terminate a "hotkey" command with Enter or Spacebar. This results in lots of "weird" behavior, when CA and my AutoCAD brain are out of sync. Just a notion - not saying it's your actual problem.

I don't know why, but maybe you can fix it easily by setting a deeper bottom margin?

Yep - love that functionality. And AutoCAD isn't the only program I've used that uses more robust, user-friendly Undo operations; I use one at home that gives a pop-up box detailing the operation to Undo when I hover the mouse over the Undo icon.

See the dashed line in plan view? That's the outside edge of the finish fascia. Pull the roof plane out the depth of the finish fascia, and I'll bet the elevation is fixed.

To fix the wall problem, go to the 2nd floor plan view, select the two intersecting CMU walls at the corner, open the wall dbx, and uncheck "balloon through ceiling above".

Rods can be made in plan with BUILD>PRIMITIVE>CYLINDER. Assign a height, position in plan, then shoot an elevation and rotate.

Nice, Jim. Now I remember why I've held on to my 30-60-90 triangles for all these years.

Decks should be slope-able. Slabs also. Even odd shapes should be slope-able. If CA can figure out roof intersections at an angle, it can figure out sloped decks and slabs that intersect at an angle.

Remember when printing meant rolling the diazo exposure into a cardboard tube and splashing in a little ammonia - then waiting ten minutes?

Yes, you did. My brain didn't read it that way the first time - I can't explain why.

I thought that was very interesting, so I took another look (and considering the file size, something had to be there). All the linework was in paper space, not model space, so Chief probably didn't know what to do with the file. Anyway, see attached: new block.zip

Like Tommy said. The only thing I have to add is that to create a molding polyline quickly, select the exterior room and Make Room Molding Polyline.

The following referenced files are missing: c:/allan engineering/mobile homes/20571 Mural ST.pdf c:/allan engineering/civil/eagle rock project/hydrology/file002.pdf Ask Allan Engineering to bind the references before sending you the dwg file. Of course, pdf files are just raster images, so don't expect to be able to extract any editable linework from the dwg, because there isn't any.

I believe this behavior is normal; however, you can pan around using the arrow keys and the command will remain active.

I had no troubles - opened all elevations at the same time, messed around a bit, selected all markers, etc. However, I didn't have your MyHand font, so it substituted with Arial - don't know if the font could possibly affect anything.

The railing walls are aligned with the stem wall main layer (concrete). Just move the railing walls out 4" (the thickness of the stem wall brick) in all directions.

Yes, the actual plan file. You can zip it first if it's large. Another option is to DropBox it and give us a link.

Does it matter why? We all work differently. We all have weird situations that pop up that require a lot of effort. Rob may have a very good reason to model the soffit framing, and it may require a long, detailed explanation that isn't relevant to the problem. BTW Rob, I trained and served with many Marines off and on over the course of my Army career - you fellas are a breed apart. Thanks for your service, and a happy belated Veterans Day to you.

Please post the plan, it will be much quicker and easier for us to help.

What Tommy said; but be aware that you can only export folders from you're User Library - not individual items (unless they are sitting alone in a folder).

Unfortunately, CA doesn't do networking and collaboration very well. My office has six seats of CA, and the only way for us to share user-created content is to export items from our User Libraries and import the content individually, then delete the old content. Major PITA - it makes standardization of library content very difficult. CA definitely needs the ability to share libraries stored on a network, much like it allows the use of shared pattern files.

I would suggest the Stafford County GIS mapping site. The lot ID is 17 45N, address is: 260 TACKETTS MILL ROAD STAFFORD VA 22556-5925 Two foot topo is available, and the site is pretty clear so the aerial gives you a good view. Do a print screen, overlay it in Chief, and you can get pretty darn close. The GIS measuring tools might help also.

Honestly, I would call Mark L. Perry, L.S., and put the question to him. A land surveyor (or whoever is out in the field working for him), should know enough to shoot both distance and azimuth (or at least bearing) from identified, established points. But, maybe he wasn't being paid to locate the house? In that case, you get what you pay for. Oops, my bad, I just noticed the "House Location Survey" text. I guess whoever paid for this definitely didn't get what they paid for.

This is a screen shot of our setup from your attached layout: Notice the Drawing Margins, Right and Botttom, are set to 6". After you've selected the printer and made any changes you need to to the printer settings, click on the Populate From Printer button. You should now be golden. Bottom line is, the printer margins were FUBAR.

It's very difficult to notice in plan, but if you zoom in/out around the intersection you may eventually notice a very slight misalignment between the two walls: To align them, select the interior wall (or exterior, whichever way you want to go) and drag using the handle where my cursor/cross hairs are in this picture: When you drag, and it doesn't take much, the wall will "snap" into alignment; notice the little red x in this picture which indicates alignment with the interior surfaces of the two walls: ...then release the mouse button, and everything should be aligned.