MPDesign

Members
  • Posts

    531
  • Joined

  • Last visited

Everything posted by MPDesign

  1. Scott, I did the following to get it to work. Open attic wall dbx and uncheck the no locate and room def options. Increase 2nd floor open below room ceiling height to 548".
  2. Wow Joe that is very generous of you! Thank you, will put to use since Anderson is right in the neighborhood! Dennis- I played around with the ctrl override, success! thank you for the reminder. cheers!
  3. I would ask questions here specific to your challenge in chief. Lots of great help and free! Feel free to Pm or email me if you wish
  4. General venting, trying to use this yesterday I don't think the bay, and bow units work very well at all. The exterior casings will not connect even with the no framing between command checked. I cannot resize the side windows to be big enough to connect to the center picture unit. Even with ignore casing for opening resize checked off. Hey Joe, how do/did you make custom units.
  5. +18, as in 18 is the number of years I have been using Chief! and stairs are still an issue.
  6. Mike Go to the roof tools, fix all roof command. Add your freeze board there and it will place freeze on all roof planes.
  7. Justin, How did you get that topo data out of Earth pro?
  8. Thank you Greg need this every now and then!
  9. Kjell, Looks great! how are the mountains done?
  10. when roof plane is selected, zoom in to label. there is a grab handle in the label text, grab and move.
  11. It sounds and looks like your print default line weight has been changed by accident. Open layout, Look at your print page setup. Advanced line weight options, make sure its set to 100 MM
  12. Jim have you tried a reinstall. there is a new patch as of this morning.
  13. Just checked there isnt even a business category on the web site. damn kids!
  14. Yes I think your right Ray. Forgot its the 1st At least I hope and pray its not true!
  15. What were the images of? a pdf? Need more info. UPLOAD THE PLAN PLEASE OR A PICTURE
  16. Larry, I found an invisible wall inside your kitchen at the bench location. deleted that wall and no more orange wall outside. The wall type was interior white fill. As for the framing of the deck. I would use a backup file to copy, paste in place. I always make sure once the deck is closed into a room, to open dbx and check (keep framing after deck is deleted.) then uncheck the auto feature. That way my custom adjustments to framing, posts, and footings are kept.
  17. create an architectural block of the trim, in elevation view with the interior trim turned of, use a p-solid and molding line. block together and copy to your library as millwork. of course you will need to make one for each window size your dealing with.
  18. Bernie, Also here is an image i grabbed off the net.
  19. Bernie, Use south for your 43.25 latitude, East for the 79.866
  20. oops, forgot to hit attach button inside-corner-block.calibz
  21. Here is one, made with a solid and a molding line. Hope you find it useful.
  22. Make one and save to your user library for future use. change the number as needed.