Renerabbitt

Some of these are not properly modeled. Here is a elevation view of the end cut of a volute with the molding profile overlayed:

any chance you would post these on my discord server? https://discord.gg/9R3KZ53mXK

**Quick Tips for Copying Elements Between Floors in Chief Architect** *Published by Rabbitt Design* *Date: December 22, 2023* *Category: Architectural Design Software Tutorial* *Video Length: 1 minute and 16 seconds* **Introduction** We start with a festive greeting and dive into a quick, useful tip for using Chief Architect software. The focus is on copying elements from one floor to another in a 3D view, specifically demonstrating how to replicate windows from the second to the third floor. **Copying Technique in 3D View** We demonstrate the simple process of copying elements in a 3D environment. The video shows how to use the Edit Toolbar to copy and paste elements. We emphasize the ease of this process, highlighting the copy and paste options in the toolbar. **Pasting on a Different Floor** Next, we illustrate the process of navigating to a different floor level and using a hotkey for the 'paste hold position' function. This ensures that the copied elements are accurately placed on the third floor, directly above their original position on the second floor. **Final Result and Quick Tip Conclusion** We conclude by showing the final placement of the windows on the third floor, which align perfectly with the floor below. The video ends with a reinforcement of how quick and efficient this method is for duplicating elements in Chief Architect. **SEO Search Terms:** Chief Architect tutorial, copying in 3D architecture software, quick design tips, efficient floor duplication, architectural software shortcuts, 3D view editing, Chief Architect window replication. See Video Below/Attached

Not understanding what you are referring to. A double click where specifically? You're opening a material from your library ot edit it and then trying to do what? or?

just place a symbol that is a 3way from your library,otherwise you need to edit the CAD block and add your annotation for the symbol you are trying to modify. Use CAD Lines set to the electrical connections layer to depict a connection between floors

This type of hardware isn't really practical in terms of integrating into a cabinet. You would need to have a very custom element in order to have a catch that is separate from the latch. If you dont plan on opening the doors in 3d, by all means just make it a single unit and attach it to the door, but the catch will swing with the door if you open it

Custom Stringer is a very easy method if it aligns with the wall above. All you would need is the custom stringer the thickness of the wall

Use regular text instead of rich text

Ah, ok, so this can be done very easily, just add a 1/16" or 1/2" jamb to your shower door and paint it then add the wall covering. Though it looks like your way worked just fine

Sorry I was confused, do you want your tile wainscot to wrap or not wrap?

Did you try what I suggested?

Not really, a wall can report its trib length on one side of the wall and be marked bearing but it cant do both sides of the wall. So no matter what there would always be some manual input

Not possible in schedules....yet You could instead build your own schedule out of macros inside of a text box

use a wall covering in the wall covering panel of the wing wall's dbx.

It would be great if you included your .plan file as well as some photos illustrating the problem and some additional info in terms of what you are calling an insert.

Example Walkthrough Packages for your social feeds

Secret Sauce...only took e a few hours to put this together Keep in mind bitrate is 1.2 to get under chieftalks darn 14mb cap..real version is 256mb and doesn't have the artifacts 1st Story Glenview Render Low Bitrate.mp4

This is a chief walkthrough..the speed ramps were in time to the music track I was going to use. super low bitrate to be able to post under the 14mb cap Chief Render Low.mp4

no not a dummy, thats a good question. Make a custom millwork symbol and adjust the bounding box of that symbol to be the depth of the cabinet. Then apply it as a shelf. You're very close to making something cool

Try what Ryan Suggested and turn those side pieces into doors..You can make this be a cabinet with no additional solids needed

You just dont need a default set for saved plan views is why I do it differently. I might do a different default set for different scales only. Your screen shots show the SPV defaults, so you couldve just set those and not used a default set. Then you have the power of the default set being able to designate something else