scottp3ul Posted August 21 Share Posted August 21 Hello, I am new to Chief Architect and I am having an issue with the height of four walls. I have tried deleting and rebuilding them but the problem remains. Any help would be greatly appreciated! Scott Link to comment Share on other sites More sharing options...
DBCooper Posted August 21 Share Posted August 21 Wall heights are usually set based on floor/ceiling heights in the room dialog but you can override any of them by editing the height directly in a camera view. So this is probably either a room problem or a wall problem. You can usually fix both by using the "reset to defaults" tool. Just select floor/ceiling heights and wall tops/bottoms for "all floors" and they should all be set back to the defaults. If that doesn't work, then you might want to post the plan so someone can poke around in it. It could have to do with the floor/ceiling structure or maybe even something else. Link to comment Share on other sites More sharing options...
scottp3ul Posted Saturday at 11:45 PM Author Share Posted Saturday at 11:45 PM Hello and thank you for your response. I tried your suggestions and unfortunately was unsuccessful. I also attempted to post my plan to this forum and received a message that the file was too large. Thanks for your assistance! Scott Link to comment Share on other sites More sharing options...
CharlesVolz Posted Sunday at 01:11 AM Share Posted Sunday at 01:11 AM Howdy Scott, Hard to help without a plan file, but here are some notes: The red check mark indicates the default value is selected in the adjacent box. The ceiling elevation defaults are in Room Specification> Structure tab. The floor and ceiling elevations of a room are affected by those of the room(s) directly below and above. Common solutions are to delete the foundation and/or align the walls of the room with those directly above and below. This is an area of CA where I think users should seek a little training; along with roofs, foundations, and default sets. It helped me back in the day. Edited July 2 by CharlesVolz Link to comment Share on other sites More sharing options...
DBCooper Posted Sunday at 02:05 AM Share Posted Sunday at 02:05 AM If your plan is too big to attach, you could try creating a compressed .zip file to see if that will work. If it is still too big, you could try removing things that don't have anything to do with the problem (like fixtures and furniture) and doing a "save as" to a new file and then zipping that. If it is still to big, you could post it to a shareable online location (like dropbox or whatever) and then post the link. Link to comment Share on other sites More sharing options...
scottp3ul Posted Sunday at 02:22 PM Author Share Posted Sunday at 02:22 PM Hoping this works Link to comment Share on other sites More sharing options...
scottp3ul Posted Sunday at 02:34 PM Author Share Posted Sunday at 02:34 PM My file is only 25100 kb, which is obviously well below the 14mb limit, so I will have to contact customer service to figure out the problem. Thanks for your help guys!!! Link to comment Share on other sites More sharing options...
ChristianA Posted Sunday at 04:42 PM Share Posted Sunday at 04:42 PM Scott, 25100 kb is larger than 14mb. Did you try zipping it? Link to comment Share on other sites More sharing options...
scottp3ul Posted Sunday at 07:19 PM Author Share Posted Sunday at 07:19 PM My mistake.. I tried to zip the file but it's still not small enough Link to comment Share on other sites More sharing options...
PitMan71 Posted Sunday at 07:22 PM Share Posted Sunday at 07:22 PM Dropbox or One Drive link would be an option if you have. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now