SHCanada2

two posts is one way with the bottom post having rock material. I'm pretty sure CA has a video for vertically different columns. Look for "columns"

CA has an article on minimum and recommended requirements.

what does it look like if you set the leader style to "none"

if your drawing sheet matches your print size, your layout page will match the pdf if "to scale" is selected or if "fit to paper is selected", which looks to be what you have there. but there is only one page showing, and you say it is printing on 3 pages? I tried it with ARCH C for both and it is only printing one page for my elevation

@winterddAre you trying to maintain the framing created by the deck, or some other framing you put there?

I seem to recall I had a similar issue a few years back and someone suggested I create a room in the porch which matched the cantilever. and that seemed to fix the impact to the other room heights

And there are many free ones that work for up to 3 or 5 min

Doesnt CA link it by default as opposed to embedding

what have you tried? Without the brick, what you describe is a standard attached garage build here (except our stem walls are 48" into the ground) The elevation of the slab vs the footing is set up in the room structure

I do a lot of basement developments and sometimes I will need the main floor plan, and second floor just because the City sometimes asks. For the basement I will just use a laser measure and draw in CA onsite to make sure everything lines up. It takes about 60 minutes I'm looking for something that will be ok accurate for "the rest of the house" for a floor plan and does not charge by the sq foot. I saw polycam has a monthly fee. Has anyone used a monthly subscription service, or God forbid someone who just sells the software to do a scan and provide a floor plan. I dont need bells or whistles, just the floor plan. I can do my own video. Anyone used something with Android? I'm willing to pay $1000 for HW if I can get the per plan fee down to about $50 or less. But the 0.20 cent per square foot that I saw for a couple software packages is too expensive, I might as well just laser measure it myself and pay myself $150 / hr

@Renerabbitt interesting, that looks like it might be persistent. Or does one have to click on the CAD detail to fire the macros, and if 2 plan files are open does it still work ( the whole global variables problem)

you could also...if your db is not being used for any other purpose other than CA notes, put each note in a CA text macro in your template plan, and then just call whichever macro from your notes. ...or put them in a ruby module which loads..and call whichever. but probably only an option if you do not use the db for any other purpose

i was going to mention the same. I find that if the walls are vertical it looks better. The leftmost wall in the pic I find distracting as it slopes inward. You can also get a better PDF image by sending the camera to a 24x36 layout and CA save to PDF to 24x36. larger image at same dots per inch equals better looking image

did you try a materials list?

I'd do solids and moulding polyline for the top. I might try material region first to see how the gap between the blocks would look. your exterior wall soffit in the front, can be modelled as a room

more importantly, that ladder does not look to comply to the 4:1 safety rule. Safety second is my motto

use an existing and click the save as button beside the plan view drop down

change the room to a balcony and build all framing

No, a couple of have asked for it to be able to be a usable global variable ... for similar to you...parcel coverage

I didn't do anything special between x15 and 16. I do not have those issues

if the lumber yard does not tell you connection details, hire structural engineer. Last one I did was steel beam to steel column, joists on top. No wood involved. Structural engineer did the post and beam specs as he was the one that suggested it instead of 4 ply LVL Yours sounds like a flush steel beam of sorts

what about the trackpad, does it have the same behaviour? and if you try in a different program that uses double clicks in a different manner from a single click? I'm with dbcooper, sounds like your left click is configured to double click.

and use 3d trees/plants to get shadowing

...well, my thought is how can the setup be the same every time, as the spans will be different. but to answer your question, i've never heard of that ability

I use a dim with no line and a polyline to do somethimg similar. I do it for parking dimensions superimposed on a survey. I keep them in my template plan for easy copying and pasting. As 24.07.2024_13.49.20_REC.mp4 I change the length or width of the polyline the dim value changes with it. I havent tried it with a line, but you could just use a polyline with a fill and mke it look like a line...similar to what I show in the video