Kbird1

this should work , it sounds like the ToolBar is Undocked and lost.... eg. you have changed monitors or gone from 3 to 2 or something like that... Mick.

I am trying this Hotfix Driver to see if it helps with X13, since the latest Version 512.15 has issues for me on a 3080Ti, it is based on 511.65 list several posts above. GeForce Hotfix Driver Version 511.72 Updated 02/04/2022 06:12 PM GeForce Hotfix Driver Version 511.72 GeForce hotfix display driver version 511.72 is based on our latest Game Ready Driver 511.65. The hotfix addresses the following issues: G-SYNC cannot be re-enabled on G-SYNC Compatible displays after manually disabling from the NVIDIA Control Panel [3523157] Call of Duty Vanguard random corruption [3519774] Assassin's Creed Valhalla may fail to launch correctly [3525655] Click here to download the GeForce hotfix display driver for Windows 10 x64/ Windows 11 x64 Mick.

that is actually the latest Driver from Nvidia , from March 22........ and I have tried it , and am currently trying some older ones , so if I find a flawless one I will post an update to my Nvidia Drivers Topic, I haven't found one so the Topic has not been updated lately, but I'll do it now. you could see if the option to Rollback to the one you had is available in Device Manager if you don't know it's number. Mick.

It seems it is seen in Chief as a Furniture Piece not a "Cabinet" so....... Place the Sink on the Floor ( agree to message ) and then open the sinks's specs ( DBX) and set the correct height , then using the CTRL Key, Slide/move the Sink back into the Cabinet. ( don't use the sink I did ) M.

I'd be happy to have a look at it ...... feel free to PM me for more Info.... M.

Not that uncommon on a Cut Rafter Roof, but not that common on Rake Walls is my guess ? I agree with Rob though once you know the offset, the centerline is not really used again. I am surprised that some Ruby Expert at Chief hasn't worked out those offsets though to add to the centerline "Cut length" so it's correct for the "Field Cut". * And Alan haven't we had Cutlist forever in SMR or is there something new in X14? M.

Any chance the Dell Tech updated the Dell Command Centre too? and perhaps the Nahimic Software? CA has a known incompatibility with Nahimic...

I guess you meant you begged them to stay on Win10? your Sig makes it confusing? Anyway, can you not Roll the Driver Dell Installed back Via Device Driver? the Crashing in 3D Chief said was fixed in the latest Drivers on Win 11, but on comment on Win 10 , I am trying different Drivers myself to see if I can find one the will work in CA , without issues, they all work in 3D games or in 3DMark > TimeSpy , which I downloaded to see if there was issues elsewhere other than Chief...nope.....all 3Dmark told me was my 3080Ti was in the 96% percentile for the 11700K CPU I have. Thanks for the link.... and one for you.... https://chieftalk.chiefarchitect.com/topic/34172-real-time-ray-tracing-questionsproblemssolutions/?do=findComment&comment=267385 M.

Unfortunately I have to say you are not the only one, I have both a 3080 and 3080Ti here and both have varying Issues in X13, not just 3D unfortunately, and there is no "known fix" for it all, in fact it seems the March update brought back the Issue in Layout of Triangle ( lines ) appearing on Wall Surfaces, and I also had a crash that corrupted the Plan and could no longer be read.... Just some from this week.... M.

I have seen this happen IF I don't close the Layout and and reopen it. It seems Chief doesn't see the the Save As Plan as a new plan until after the Save As Plan and Layout are closed, on Re-opening the Layout it will Reference the Original Plan again. M.

Your Framer, especially his Back may disagree , but Eng. may disagree with Him too

Not quite sure what you are doing as like others I can't get the "reversing issue" in your Plan.....

Would be my 1st thought too assuming Attic Walls layer is On , not just Walls, Normal M.

You can also select one cabinet and click on the Custom Countertop tool on your Toolbar ...assuming X12/13 and then grab the edit handle and pull it along the bank of cabinets. Please add you SIG. so we know what Version you are using as it matters for a lot of answers. If you are using a Home Designer Product you should be over on HomeTalk as those Products can't do what Interiors and Chief Premier can...... https://hometalk.chiefarchitect.com/ you might also want to fully avail yourself of the CA KnowledgeBase ( KB) or FAQ as it's called Elsewhere https://www.chiefarchitect.com/support/database.html M.

I typically don't use Live View in Layout as the PDF Size EXPLODES exponentially, a recent example was 22.3mb without and 52.7mb with , ( so it can't be emailed any longer) but you are correct , the Views in PDF do look nicer even STD View with Lines as in the example above looked nicer than in Layout. The above was some Preset Cameras for Client Views that could be opened 1 by 1 for Viewing but IMHO.... ASTRAL 3D and RTRT just ain't there yet. M.

I'd try making my own back clipped View say 8" and a dedicated Layerset that doesn't show anything except the Wall Framing and perhaps a few other components eg Rim Joists as needed. And possibly Send View to a Cad Detail if needed. * great minds think alike M.

IF it's X13 simply deleting the bottom Seperation , usually removes the bottom of the cabinet I find , I sometimes have to use "No Bottom" as well but that setting alone does not remove the Separation as Chief's Frameless Cabinets are not really Frameless they are just Auto 3/4" Framed cabinets. and a how to do your Sig. Vid. https://chieftalk.chiefarchitect.com/topic/18908-signature-here-at-chief-talk/?tab=comments#comment-155662 M.

au contraire Monsieur PS. could not agree more

It was the XC Ultra that was On Sale but it looks as though you are right.....it is gone off the Restock Sale Page too. Newegg had the same price but is also sold out now.... M.

Watch ya back the RED SMARTIES are being dropped again with free abandonment at the moment M.

Molding Line does work , though I thought the Grout Lines would work out better with a molding line....

You can likely use a Molding Line for this drawn in Plan View but I haven't tried it yet..... M.

The View Opens "instantly" on the 3080Ti, but it is far from "Photo Realistic" as I think I have now seen in some of Chief advertising... * Still worth getting that 3070Ti Larry and only 1/2 the cost (now) of a 3080 Ti.... go on.... ya know ya wanta....

Cleaner from a distance anyway......after 10,000 samples with the 3080Ti screaming for mercy for 7 mins or so ....bonus my Office is nice and warm now too..... But zoomed in not so much.......... Drywall has always been bad , from the start , perhaps we still don't have real PBR Materials in Chief ? I am not sure.... but am surprised the Cabinet Hardware is so "grainy"

Yes that would work too, but I find it easier to get one side right , then just copy reflect each plane over the Ridge line and join them into the main roof. * for that particular one in the OP, 3 may work better since it is almost a Barrel with a little flare each side. M.