scottharris

Woodmode keeps the catalog private and restricts access to dealers thru the woodmode website. It is listed on our site as a pointer and link to woodmode.

I don't know of a good way to distinguish; you can when you modify dimensions, physically change their layer to manual.

This is correct it can be done in X6 and X7 - you need to choose the door style from the Library for that specific face item. See the attached example - it's also a cabinet in the sample plan Five-12 Kitchen if you want the details on the cabinet from my attached image.

Barry, If you delete (modify) an auto dimension, it 1) becomes a manual dimension and 2) will then prompt you to turn off the auto dimension with auto-refresh (since it won't refresh your manual dimension). So, you need to make a decision… I typically turn the auto dimension off once I have the shell and the openings setup and manually make my adjustments.

Barry, For the Auto NKBA, there is not a control to turn off/on what you locate. It is designed to pickup the typical items the NKBA recommends. I do it manually; using a dimension default for the cabinet boxes and one for my appliance centerlines. It works very quickly. In the dialog diagram these are “NKBA 1E – Elevation Cabinets” and “NKBA 2 – Appliance Centerline” (when using the centerline, change your dimension tool to centerline). If you want my defaults, you can export them from the Fire & Ice Sample plan (export the annotation sets; you will then just need to turn off openings in my NKBA 1E configuration.

Hi All, I have a few presentations at the 2015 Builder / Kitchen & Bath show. In particular is the topic using “3D Software to help Sell the Job”. In the past we have had presentations like – a kitchen that would change cabinets styles instantly using “set as default” It is fun and visual. (see video) If you have some suggestions you can share, I would greatly appreciate hearing from you. Thanks in advance!

Jim, you can find a sample construction drawing completed in Chief Architect on our samples gallery. If you have time, take a look at the "Riverstone" plan.

The people figures that are in the 3D Library are "silhouettes" - in the specialty category. Agreed, the search function needs help - it's on our list

What you can control for materials is the Sash and Trim for the interior and exterior. Do you have an example of what you would like you can post?

Take a look at this video on ray trace tips and techniques; it is long (1 hour), but it has good information. One tip I like to do before ray tracing, is inspect my materials with a ray trace preview. With the rainbow tool (define materials), go to the properties panel, and above the image preview change the setting to “show ray trace view” – it can quickly help you set your materials correctly before you run your main ray trace

You can with these steps: 1. set the cabinet to not have a door 2. place the door separately from the Library and rotate it open.

Charles, the cross-section slider is going to leave hollow areas like you are seeing. You might try the doll house (floor overview); then, if you need, set the ceiling height to 5' - you can see the tradeoff in the attached image. (I suppose you could lower the height of windows and doors to get it exact) You won't be able to use the slider with the floor overview, but you will have solids for doors/walls, etc. For water, use something like a polyline solid, set the elevation and paint it with water.

Todd, I think another user sent me the fridge or I downloaded from Sketchup. You can get the fridge I used from the Fire & Ice Kitchen sample plan on our website as well.

I think this issue should be better addressed in the next release; we will allow asymmetrical cabinet face layouts so you can use a Split Items button to modify horizontal and vertical layout of doors and drawers on cabinets - so, you can avoid the issue noted above about doubling a stile.

Scott, there is a simplistic video on Room Planner; however, it may not have all the detail you are after. We have a few customers lined up to work with on putting more information together. In the mean time, if others have information to share, we would like to learn more on how people are measuring as-builts. Room Planner can be a good tool for as-builts and we are adding more functionality (besides an Android version). So, let us know what you need.

A Vector view often will show the seams of the objects; however, you can get the camera angle positioned to hide it (see attached image) the other option is to use a single large cabinet to get the view you are after.

Chief Architect has a free video play list for new users, when you are at the video site, video.chiefarchitect.com go to the play list "Trial Version" (on the upper right side of the screen). There are several great videos to help (and our youtube channel). Also, we offer free webinars that can help - see the schedule here. Once you are a customer, you will then have full access to over 400 detailed videos on video.chiefarchitect.com

Here's a quick tip video on a similar roof you may find helpful.