BethVanDeusen Posted September 23, 2015 Share Posted September 23, 2015 I am having an issue when I use the wall elevation view. Cabinets/appliances will partially disappear. When I scroll in or out, they will sometimes reappear. This does not happen if I do a cross section view. See attached example. I have not had this issue in previous versions and it only happens with wall elevations. Link to comment Share on other sites More sharing options...
Alaskan_Son Posted September 23, 2015 Share Posted September 23, 2015 Probably one to send into tech support but looks like a video card issue to me. Link to comment Share on other sites More sharing options...
DavidJPotter Posted September 23, 2015 Share Posted September 23, 2015 No one would be happy with such performance. I looked up your video card and it is a good one which makes your complaints all the more vexing. Try updating your software video card drivers and see if that helps. You should also make a formal complaint to Tech Support for sure. I do hope you get it solved. DJP Link to comment Share on other sites More sharing options...
KirkClemons Posted September 24, 2015 Share Posted September 24, 2015 Is the wall perfectly straight? Or is the elevation camera looking directly at the wall? I've seen cases where a slight angle to either the camera or the wall provides bad results. Link to comment Share on other sites More sharing options...
BethVanDeusen Posted September 24, 2015 Author Share Posted September 24, 2015 Thanks to all for your responses. I did contact tech support and it was a video card issue. Updated driver installed and all is well. Link to comment Share on other sites More sharing options...
kjacobs Posted November 4, 2015 Share Posted November 4, 2015 I am having a similar problem. Cabinets in wall elevation do not show up, but are visible in all other camera view. What's weird, is they did show up a few days ago...but today, nothing... Maybe mine is a video card issue as well? Link to comment Share on other sites More sharing options...
Greg_NY61 Posted November 4, 2015 Share Posted November 4, 2015 Is the Cabinet Base Layer turned on? Link to comment Share on other sites More sharing options...
Bill_Emery Posted November 4, 2015 Share Posted November 4, 2015 The wall elevation camera will only show cabinets(or millwork) that are entirely within the room that the wall elevations originate from. If the cabinet is in another room, or partially in another room, it won't be visible. If this is the case, you may have to use a cross section camera, and adjust the layout box for the room that you want to show. Link to comment Share on other sites More sharing options...
DRAWZILLA Posted November 4, 2015 Share Posted November 4, 2015 If the cabinet is in 2 rooms just open up the camera DBX for the wall detail and check to "ignore railings and invisible walls", then you will get both rooms. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now