kwhitt Posted April 9, 2021 Share Posted April 9, 2021 I'm engineering a 3cm stone hood to go in a kitchen. I'd like to show three progressive isometric views showing the various layers of construction. I have set up three different isometric camera views using three different layer sets. When I was finally able to get all three camera views onto the layout, the isometric cameras keep moving off center and I am unable to "pull" the layout boxes to get them re-positioned (end up with void white space as shown in middle). I also got a strange error at one time telling me to contact tech support, but it didn't stay on the screen long enough for me to get all the info. Has anyone had any luck with isometric views and layout? Attached are the files if anyone can give me a hand. Thanks, Kevin CHF_Snow_1796 Cypress Isle_HOOD DETAIL_04-09-21.zip Link to comment Share on other sites More sharing options...
robdyck Posted April 9, 2021 Share Posted April 9, 2021 On 4/9/2021 at 5:45 PM, kwhitt said: I'm engineering a 3cm stone hood to go in a kitchen. I'd like to show three progressive isometric views showing the various layers of construction. I have set up three different isometric camera views using three different layer sets. When I was finally able to get all three camera views onto the layout, the isometric cameras keep moving off center and I am unable to "pull" the layout boxes to get them re-positioned (end up with void white space as shown in middle). I also got a strange error at one time telling me to contact tech support, but it didn't stay on the screen long enough for me to get all the info. Has anyone had any luck with isometric views and layout? Attached are the files if anyone can give me a hand. Thanks, Kevin CHF_Snow_1796 Cypress Isle_HOOD DETAIL_04-09-21.zipFetching info... Expand Don't use live views!!! Problem solved! 1 Link to comment Share on other sites More sharing options...
Alaskan_Son Posted April 9, 2021 Share Posted April 9, 2021 Another couple potential methods: Send To Layout using Current Screen As Image Use Perspective Cameras with a 10 degree Field of View (the smallest it will go). 1 Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 6:04 PM, solver said: No input on your question, but a thought on a different method. Would screen captures of each stage work? My screen capture tool has a Repeat Last Capture command that I use all the time to do similar. You would get 3 identical images easy to place and align in layout. Expand Thanks Eric. That occurred to me too, however, the resolution isn't large enough when it goes to print. Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 6:50 PM, robdyck said: Don't use live views!!! Problem solved! Expand Rob - I've tried that and eventually the camera moves (especially upon reopening the file) and the resolution here again is not high enough... Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 6:55 PM, Alaskan_Son said: Another couple potential methods: Send To Layout using Current Screen As Image Use Perspective Cameras with a 10 degree Field of View (the smallest it will go). Expand Thanks Michael. I will give your 2nd suggestion a try. Is this a known problem with Chief that an isometric camera will move? Link to comment Share on other sites More sharing options...
robdyck Posted April 9, 2021 Share Posted April 9, 2021 On 4/9/2021 at 7:00 PM, kwhitt said: Rob - I've tried that and eventually the camera moves (especially upon reopening the file) and the resolution here again is not high enough... Expand Notice that the camera jumps between view2 and view 3. That's odd. Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 7:02 PM, robdyck said: Notice that the camera jumps between view2 and view 3. That's odd. Expand Yep, I've noticed that too... Thanks for looking at the file. Kevin Link to comment Share on other sites More sharing options...
Alaskan_Son Posted April 9, 2021 Share Posted April 9, 2021 On 4/9/2021 at 7:01 PM, kwhitt said: Is this a known problem with Chief that an isometric camera will move? Expand If you report it then it certainly will be. Link to comment Share on other sites More sharing options...
robdyck Posted April 9, 2021 Share Posted April 9, 2021 On 4/9/2021 at 7:03 PM, kwhitt said: Yep, I've noticed that too... Thanks for looking at the file. Kevin Expand I've done this type of thing without any of these difficulties, however I would have approached it differently. I wouldn't have used 3 cameras in the same location. I'd have replicated them away from each other in either the y or x axis. I also wouldn't have used 3 separate symbols. Rather, each view would show additional items, not different items. I'd have started with the framing and a camera, replicate, then add sheathing, replicate then add finish material. These won't jump...I guarantee it. I've been using the same camera views and updating and exchanging images hundreds of items over the years. They always land in the same spot. Link to comment Share on other sites More sharing options...
robdyck Posted April 9, 2021 Share Posted April 9, 2021 On 4/9/2021 at 7:09 PM, Alaskan_Son said: If you report it then it certainly will be. Expand FWIW, I did report this several years ago. Link to comment Share on other sites More sharing options...
robdyck Posted April 9, 2021 Share Posted April 9, 2021 On 4/9/2021 at 7:03 PM, kwhitt said: Yep, I've noticed that too... Thanks for looking at the file. Kevin Expand It's not odd, they aren't in the same location! Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 7:09 PM, Alaskan_Son said: If you report it then it certainly will be. Expand I'll be glad to report it, I always do, but my question was whether or not this was a known issue. Sounds like it is seeing Rob's reply. In fact, I've reported several bugs and although Tech Support responds quickly, they never seem to get fixed. Link to comment Share on other sites More sharing options...
robdyck Posted April 9, 2021 Share Posted April 9, 2021 Hey Kevin, you just gotta be a bit more careful placing these items. Space them out and you'll be fine! kevs_hood.mp4 Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 7:20 PM, robdyck said: It's not odd, they aren't in the same location! Expand I swear they were in the same location to start. I used your method above by replicating the camera view and all was well at first. Then they started moving. I then re-centered each camera and they still move. Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 7:21 PM, robdyck said: Hey Kevin, you just gotta be a bit more careful placing these items. Space them out and you'll be fine! kevs_hood.mp4Fetching info... Expand Thanks Rob. I got to that very same point, but when you send them to layout, they move. Link to comment Share on other sites More sharing options...
Alaskan_Son Posted April 9, 2021 Share Posted April 9, 2021 On 4/9/2021 at 7:21 PM, robdyck said: Hey Kevin, you just gotta be a bit more careful placing these items. Space them out and you'll be fine! kevs_hood.mp4Fetching info... Expand The whole key to Kevin's issue is the "Isometric" part. To create a true isometric view, he needs to be using an orthogaphic camera. Try sending one of those orthographic views to layout and then try moving, resizing, reshaping, and updating those views. I think you'll pretty quickly see the problem. Link to comment Share on other sites More sharing options...
robdyck Posted April 9, 2021 Share Posted April 9, 2021 On 4/9/2021 at 7:25 PM, kwhitt said: Thanks Rob. I got to that very same point, but when you send them to layout, they move. Expand And FWIW, I would only use images for this purpose just to make sure Chief doesn't sneak a layout view away from me while I'm not looking. Link to comment Share on other sites More sharing options...
Alaskan_Son Posted April 9, 2021 Share Posted April 9, 2021 On 4/9/2021 at 7:21 PM, kwhitt said: 'll be glad to report it, I always do, but my question was whether or not this was a known issue. Expand It might be know to a small number of people. I do recall having seen it before, but I also hardly...if ever...send orthographic 3D cameras to layout and as such it's not something I've personally had to contend with. The real question isn't whether its a "known" issue or not but whether or not Chief has been made aware of it and how many people have reported it. If only one person is reporting the problem, then its likely going to take a back seat to 100 other issues being reported by 2 people...and those are going to take a back seat to the 20 other issues being reported by 3 people, etc. 1 Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 7:45 PM, solver said: If you Export an image, you can up the resolution. Would this make a difference? Expand Eric - I think that's what I'll end up doing. It's just a pain to get all the images to line up using this method. Thanks for your input. Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 7:47 PM, Alaskan_Son said: It might be know to a small number of people. I do recall having seen it before, but I also hardly...if ever...send orthographic 3D cameras to layout and as such it's not something I've personally had to contend with. The real question isn't whether its a "known" issue or not but whether or not Chief has been made aware of it and how many people have reported it. If only one person is reporting the problem, then its likely going to take a back seat to 100 other issues being reported by 2 people...and those are going to take a back seat to the 20 other issues being reported by 3 people, etc. Expand I understand (squeaky wheel and all). All the other cameras work so precisely. I am surprised that the ortho views are not as good. Thanks again for the help. I saw your other post about leaving YouTube. I have switched to Rumble. They've got some things to work out, but the platform is coming along nicely! I hope to see you back up again soon as I always watch your vids. 1 Link to comment Share on other sites More sharing options...
Chopsaw Posted April 9, 2021 Share Posted April 9, 2021 A little late to the party but that is a perfect little gem for a layered 3D PDF. I just wish they were easier to make or even if chief would allow us to create and embed them. Link to comment Share on other sites More sharing options...
kwhitt Posted April 9, 2021 Author Share Posted April 9, 2021 On 4/9/2021 at 8:13 PM, solver said: When you import, they will come in at the same location. Resize as required, Transform/Replicate to move. You have the Align and Align/Distribute Along Line tools available too. Expand Thanks Eric! Link to comment Share on other sites More sharing options...
glennw Posted April 10, 2021 Share Posted April 10, 2021 Why not just use the one model and the one camera and use layer sets to display the various stages? Link to comment Share on other sites More sharing options...
Alaskan_Son Posted April 10, 2021 Share Posted April 10, 2021 On 4/10/2021 at 12:54 AM, glennw said: Why not just use the one model and the one camera and use layer sets to display the various stages? Expand I can't speak for Kevin, but the most obvious answer is that they can't be kept live that way. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now