Larry_Sweeney Posted January 25, 2018 Share Posted January 25, 2018 Is this a BUG or a setting problem? What our my options? I'm guessing as a work around I could lay a p-solid in the doorway and give it the oak material to fill the gap. Is this the best solution? I just want to make sure I'm not just doing something wrong to get this result. Thank you. Link to comment Share on other sites More sharing options...
javatom Posted January 25, 2018 Share Posted January 25, 2018 Could you raise the door off the floor? Link to comment Share on other sites More sharing options...
JJohnson Posted January 25, 2018 Share Posted January 25, 2018 Why use a doorway at all ? Just break the low wall and pull it back to create opening. Link to comment Share on other sites More sharing options...
dshall Posted January 25, 2018 Share Posted January 25, 2018 I bet one room is a slab and the other is a wood floor..... OTOH, sometimes when the wall is very wide, the floor material goes missing..... and then you could PTP Link to comment Share on other sites More sharing options...
Larry_Sweeney Posted January 25, 2018 Author Share Posted January 25, 2018 I made the opening using a doorway and added a pass-through on each side then mulled them together. I just realized that by unmulling the three items the problem cleared up. I'll have to look at the opening a little closer to see if I have any other problems not having them mulled. I just assumed they would have to be mulled together to look correct. I have my units set up for zero separation and no frames or casing. Link to comment Share on other sites More sharing options...
Alaskan_Son Posted January 25, 2018 Share Posted January 25, 2018 On 1/25/2018 at 5:18 PM, solver said: I usually do these like this. Pass-Through and Doorway. Expand Nice illustration Eric. Link to comment Share on other sites More sharing options...
Larry_Sweeney Posted January 25, 2018 Author Share Posted January 25, 2018 Eric......Do you then mull them or not? Would there be any reason to mull them? If you do mull them, do you get the same issue with the missing flooring material as in my case? Link to comment Share on other sites More sharing options...
Larry_Sweeney Posted January 26, 2018 Author Share Posted January 26, 2018 Thanks to everyone for your input. Have a great day. Link to comment Share on other sites More sharing options...
DH7777 Posted November 3, 2020 Share Posted November 3, 2020 On 1/25/2018 at 4:32 PM, JJohnson said: Why use a doorway at all ? Just break the low wall and pull it back to create opening. Expand I guess I could do that. I already thought of that but I end up with no jamb and casing. I HATE trying to work with molding Polylines and Molding Lines. they are annoying to me. I really was hoping there was a way to do this and the trim casing is automatic. Link to comment Share on other sites More sharing options...
DH7777 Posted November 3, 2020 Share Posted November 3, 2020 On 1/25/2018 at 5:39 PM, Alaskan_Son said: Nice illustration Eric. Expand How do I get the casing to be added to the rest of the opening? I need one side all the way to the floor and the other side to land on the counter at half-wall height Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now