dshall

try this but what you will not be able to build is your window inverted (the window ridge pointed down instead of up)

For this reason I do not have custom tool bars.... eventually they will get broken and I would need to reset toolbars, not worth the aggravation.

Required attic ventilation is 1/150 or 1/300 depending on ......

Ain't Larry the smart one. You still have the garage foundation and the other room. I went down to level zero and turned off the ROOF OVER THIS ROOM and you can see what you get.' ' you need to delete the rooms at level zero (or auto build foundations?

I think he would like you to post the PLAN not PDF's If it is too big, use a drop box link, you will have an answer in about 38.2 seconds

Yep, and he could check the lateral force in case shear panel was required\

Metal braces are used a lot to support overhang countertops, I assume the same can be done for the shelves.

Yep, big difference, thanks all.

I checked the USE ACTIVE WINDOW SIZE box and I think it now works.... probably my bad......

Hi Dermot, I didn't type in any number, I never have. I have left it as is. It is OOB. Maybe that is the issue, I need to change what the default setting is.

Hi Michael, (num4,num4) is the hot key to export the pic. (for whatever reason, I have never had much luck with the knowledge base button) I never had this issue with the old Mac, I wonder if there is a setting somewhere that defines the number of pixels for the reported pic?

Yes, why is it so big? How do I control the size? This is something I never had an issue with until I got the new Mac. So what is controlling the size? thanks Eric.

Why are my pictures to big to export? I take a camera view andI want to export and this is the message I get does anybody know what is going on? I have been doing this for years (I think) and now with the new Mac I get this.

Hi Shayne, I would love to do a ZOOM meeting soon to compare notes. here is my email dscotthall2@icloud.com

Ryan, is the lack of memory (8gb vs 16 gb) the reason for the machine being slow? Is the reasoning being that CA can only use 8gb, so if anything else is going on, CA will be slower? BTW, The only reason I did not upgrade to the best was it was a special order and I needed the machine ASAP. If you can tell me that the lack of memory is the reason for being sluggish, I will upgrade today. thank you for your input.

Hi Guys, I bought new 27"MAC..... should I exchange for better IMAC. This new IMAC seems to be more sluggish than my 2017 27" IMAC that had all bells & whistles Any thoughts? thanks

thanks Joe

Stupid question... How so I get rid of gray back ground? I am in a plan. Typically the entire window has white back ground. This plan has a gray back ground. I thought at one time if I did a COMMAND F2 it would get fixed. Any ideas? This is the only plan looking like this. thanks

I found the issue. There was a piece of drywall from 2 sloped ceiling planes that were not merged very well at the ridge. Once I selected the two ceiling planes and merged all was well. BTW, I could not select the flying drywall.... because.... I do not know why....

The problem is I have something in Tokyo so it is messing up the model. Now I can at least find the offending item I will be good to go. Thanks Mick for looking into this.... (look closer, you will see the black line are offset from the colored shapes)

Anybody seen this? Shadow effect, by the way, what is the site to report this to CA. Hinderberger 2021 1112 sheet 9 2.pdf Hinderberger 2021 1112 sheet 9 2.pdf

Larry, I remember having your issue a few years back. I do not remember how I solved it……

Yeah, that is what I came up with, your foundation wall was inline with the finish of the wall above..... Robert is muy rapido

Nice! thanks guys,I had not thought of that.