Alaskan_Son Posted January 21, 2016 Share Posted January 21, 2016 Scott ordered some outlets that could be attached to island cabinetry (or almost any other item for that matter). The ones we have available in the library now do not display properly in both plan and 3D views without adjusting the origin. Once the origin is adjusted, they won't snap properly. Anyway, here are some that do all the above correctly. Created in X7...I just took the standard cabinet mounted outlets from the library and made some tweaks. Once imported they should be in your User Library in a folder titled "Cabinet Outlets". Cabinet Outlets.calibz 3 Link to comment Share on other sites More sharing options...
dshall Posted January 21, 2016 Share Posted January 21, 2016 Good stuff Michael, it's only taken 10 years to take care of this, mucho appreciato. BTW, I tried several years ago but I could not figure it out, props to you. Link to comment Share on other sites More sharing options...
facer_03 Posted January 22, 2016 Share Posted January 22, 2016 Thank you Alaskan_Son Link to comment Share on other sites More sharing options...
Dennis_Gavin Posted January 22, 2016 Share Posted January 22, 2016 Thanks Michael! Link to comment Share on other sites More sharing options...
NRST8TRKR Posted February 6, 2016 Share Posted February 6, 2016 Thanks again Michael, Ken Link to comment Share on other sites More sharing options...
Alaskan_Son Posted February 6, 2016 Author Share Posted February 6, 2016 You're welcome guys. Link to comment Share on other sites More sharing options...
MPDesign Posted February 6, 2016 Share Posted February 6, 2016 Thank you Michael I think Chief should compensate you for fixing there symbol! 1 Link to comment Share on other sites More sharing options...
Alaskan_Son Posted February 6, 2016 Author Share Posted February 6, 2016 Thank you Michael I think Chief should compensate you for fixing there symbol! I gotta say...That has a nice ring to it Link to comment Share on other sites More sharing options...
Cheryl_C_Crane Posted February 8, 2016 Share Posted February 8, 2016 Greatly appreciate you taking the time to make these, and for sharing! Link to comment Share on other sites More sharing options...
Chopsaw Posted May 29, 2016 Share Posted May 29, 2016 Thanks Michael, I will try my best to figure out how you did this. Link to comment Share on other sites More sharing options...
Alaskan_Son Posted May 29, 2016 Author Share Posted May 29, 2016 Thanks Michael, I will try my best to figure out how you did this. You can find some clues here... https://chieftalk.chiefarchitect.com/index.php?/topic/8942-fancy-cad-blocks-for-symbols-that-remain-consitent-between-2d-and-3d/#entry79240 Link to comment Share on other sites More sharing options...
CJSpud Posted June 11, 2016 Share Posted June 11, 2016 Mucho Gracias. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now