Renerabbitt Posted February 17, 2019 Share Posted February 17, 2019 This video is pretty long, looking for a ton of feedback so I can narrow down a direction and compile videos that will be meaningful to everyone. Going over some good tricks and tips for creating awesome looking scenes with little to no effort after templating 1 1 Link to comment Share on other sites More sharing options...
SNestor Posted February 17, 2019 Share Posted February 17, 2019 Your video on PBR shows the possibilities. However most of what you went over was too advanced for me. Needless to say...but i was amazed. Also...I’m always torn about the value of spending a lot of time on rendering scenes. Seems like I waste a lot of time trying to get things just right...but can’t be compensated for the effort required. I would like you to do short videos that explain some of the basics...such as “what is an ambient occlusion map and how do you create one”. Then, where do you store the maps you have created. Same with the other maps. How do you create...what they do...and where do you keep them on your computer. Basic stuff...start at the beginning. One more thing. How do you post a video on Chief Talk without posting to YouTube? Thanks for doing a great video. Very eye opening. Link to comment Share on other sites More sharing options...
DRAWZILLA Posted February 17, 2019 Share Posted February 17, 2019 Rene, nice video, it seems to explain it all. Lots to ponder. I do lots of mostly con doc's so never get into that much detail with my renders, Scott and I call our renders "Crappy renders" mostly b/c we didn't want to wait for ray-traces. Thanks for the lesson and tweaks to get them better. Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 17, 2019 Author Share Posted February 17, 2019 On 2/17/2019 at 3:25 PM, SNestor said: Thanks for doing a great video. Very eye opening. Expand Exactly what I was hoping for in a response, thank you very much. I know I wasnt very clear in the video but one of the major points is that I only have to setup these default materials once and then all subsequent kitchens etc. Will look good with only a few minutes time. I ended up saving all the materials to defaults after the video. I'll break a video into parts as suggested . Do you have a kitchen .plan file you could share? I could use it as an example Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 17, 2019 Author Share Posted February 17, 2019 On 2/17/2019 at 6:27 PM, DRAWZILLA said: Rene, nice video, it seems to explain it all. Lots to ponder. I do lots of mostly con doc's so never get into that much detail with my renders, Scott and I call our renders "Crappy renders" mostly b/c we didn't want to wait for ray-traces. Thanks for the lesson and tweaks to get them better. Expand Thanks as well.. do you happen to have a crappy render .plan to share ? Haha Link to comment Share on other sites More sharing options...
DRAWZILLA Posted February 17, 2019 Share Posted February 17, 2019 On 2/17/2019 at 7:11 PM, Renerabbitt said: Thanks as well.. do you happen to have a crappy render .plan to share ? Haha Expand Nothing special, just renders with no tweaks, they are much better now using the PBR through. Link to comment Share on other sites More sharing options...
SNestor Posted February 17, 2019 Share Posted February 17, 2019 On 2/17/2019 at 7:10 PM, Renerabbitt said: Do you have a kitchen .plan file you could share? I could use it as an example Expand Not really...but I’ll work on something and post later. Thanks Link to comment Share on other sites More sharing options...
johnny Posted February 17, 2019 Share Posted February 17, 2019 Does anyone know if its possible to export Chief files WITH all the texture and reflection maps??? Using PBR would be incredibly useful if there was a way to export the work into a rendering app that continued the process. Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 17, 2019 Author Share Posted February 17, 2019 On 2/17/2019 at 8:40 PM, johnny said: Does anyone know if its possible to export Chief files WITH all the texture and reflection maps??? Using PBR would be incredibly useful if there was a way to export the work into a rendering app that continued the process. Expand Not that know of- The material files I use in Thea use the same material diffuse/bump/normal/roughness maps as CA so that I don't need to constantly update both Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 17, 2019 Author Share Posted February 17, 2019 On 2/17/2019 at 7:27 PM, DRAWZILLA said: Nothing special, Expand On 2/17/2019 at 8:02 PM, SNestor said: Not really Expand Steve and Perry, Uploaded this today: May be fun for you to try out in a kitchen and see what results come of it. Let me know! Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 17, 2019 Author Share Posted February 17, 2019 On 2/17/2019 at 3:25 PM, SNestor said: ne more thing. How do you post a video on Chief Talk without posting to YouTube? Expand also, forgot this one- so long as the video is under 25mb it will upload- which for a 4k resolution is about a 3 min vid Link to comment Share on other sites More sharing options...
SNestor Posted February 17, 2019 Share Posted February 17, 2019 On 2/17/2019 at 9:50 PM, Renerabbitt said: also, forgot this one- so long as the video is under 25mb it will upload- which for a 4k resolution is about a 3 min vid Expand Ok...but your video on PBR was much longer than 3 min Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 17, 2019 Author Share Posted February 17, 2019 On 2/17/2019 at 10:13 PM, SNestor said: Ok...but your video on PBR was much longer than 3 min Expand That was from YouTube Link to comment Share on other sites More sharing options...
SNestor Posted February 17, 2019 Share Posted February 17, 2019 On 2/17/2019 at 10:15 PM, Renerabbitt said: That was from YouTube Expand Oh...yea, I see that now. I watched it mostly on my iPhone and never saw the YouTube symbol. Weird...ok, sorry about that. Link to comment Share on other sites More sharing options...
SNestor Posted February 17, 2019 Share Posted February 17, 2019 On 2/17/2019 at 7:10 PM, Renerabbitt said: Exactly what I was hoping for in a response, thank you very much. I know I wasnt very clear in the video but one of the major points is that I only have to setup these default materials once and then all subsequent kitchens etc. Will look good with only a few minutes time. I ended up saving all the materials to defaults after the video. I'll break a video into parts as suggested . Do you have a kitchen .plan file you could share? I could use it as an example Expand Quoted you above so you would see this post; I downloaded your "Starter Kitchen Material Package" from your "X11 Ongoing Symbols Thread"...but I'm getting a "texture missing" on a number of the materials. Is this correct? I love the recessed light you created...works fantastic. The subway tile is great also... Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 17, 2019 Author Share Posted February 17, 2019 On 2/17/2019 at 11:26 PM, SNestor said: Quoted you above so you would see this post; I downloaded your "Starter Kitchen Material Package" from your "X11 Ongoing Symbols Thread"...but I'm getting a "texture missing" on a number of the materials. Is this correct? I love the recessed light you created...works fantastic. The subway tile is great also... Expand Can you list which materials are missing, or screenshot for me? Link to comment Share on other sites More sharing options...
SNestor Posted February 17, 2019 Share Posted February 17, 2019 On 2/17/2019 at 11:51 PM, Renerabbitt said: Can you list which materials are missing, or screenshot for me? Expand 5131 Calacatta-Ceasarstone ALDER DEFAULT CABINET Ceiling Gyp Bd Oak Plank Floor Wall Textured Gypsum Board Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 17, 2019 Author Share Posted February 17, 2019 On 2/17/2019 at 11:55 PM, SNestor said: 5131 Calacatta-Ceasarstone ALDER DEFAULT CABINET Ceiling Gyp Bd Oak Plank Floor Wall Textured Gypsum Board Expand Strange..I'll try to repair it Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 18, 2019 Author Share Posted February 18, 2019 On 2/17/2019 at 11:55 PM, SNestor said: On 2/17/2019 at 11:51 PM, Renerabbitt said: Can you list which materials are missing, or screenshot for me? Expand 5131 Calacatta-Ceasarstone ALDER DEFAULT CABINET Ceiling Gyp Bd Oak Plank Floor Wall Textured Gypsum Board Expand mind trying this out and see if you get the same problem: RABS_STARTER_KITCHEN_MATERIAL_PACKAGE.calibz Link to comment Share on other sites More sharing options...
SNestor Posted February 18, 2019 Share Posted February 18, 2019 On 2/18/2019 at 12:30 AM, Renerabbitt said: mind trying this out and see if you get the same problem: RABS_STARTER_KITCHEN_MATERIAL_PACKAGE.calibzFetching info... Expand Still missing texture file in: - Ceiling Gyp - Oak Plank Floor - Wall Textured Gypsum Board The Alder Cabinet material is really nice... Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 18, 2019 Author Share Posted February 18, 2019 On 2/18/2019 at 12:33 AM, SNestor said: Still missing texture file in: - Ceiling Gyp - Oak Plank Floor - Wall Textured Gypsum Board The Alder Cabinet material is really nice... Expand no idea whats goin on..try this one: RABS STARTER KITCHEN MATERIAL PACKAGE.calibz Link to comment Share on other sites More sharing options...
SNestor Posted February 18, 2019 Share Posted February 18, 2019 On 2/18/2019 at 12:56 AM, Renerabbitt said: no idea whats goin on..try this one: RABS STARTER KITCHEN MATERIAL PACKAGE.calibzFetching info... Expand Same result...maybe someone else should try downloading. Maybe I'm screwing something up. Link to comment Share on other sites More sharing options...
Renerabbitt Posted February 18, 2019 Author Share Posted February 18, 2019 On 2/18/2019 at 12:59 AM, SNestor said: Same result...maybe someone else should try downloading. Maybe I'm screwing something up. Expand No I think it has to do with CA backing up textures to the data folder...as soon as I point to the texture in my file structure it redirects to CAs data folder Link to comment Share on other sites More sharing options...
gelbuilding Posted February 18, 2019 Share Posted February 18, 2019 On 2/17/2019 at 8:40 PM, johnny said: Does anyone know if its possible to export Chief files WITH all the texture and reflection maps??? Using PBR would be incredibly useful if there was a way to export the work into a rendering app that continued the process. Expand When exporting CA all the textures come with the model. I use Thea and apart from the glass which need changing, Only all of the diffuse and roughness maps get exported. I suppose i have to find in setting how to allow the other maps to be exported. Link to comment Share on other sites More sharing options...
Kbird1 Posted February 18, 2019 Share Posted February 18, 2019 On 2/18/2019 at 12:59 AM, SNestor said: Same result...maybe someone else should try downloading. Maybe I'm screwing something up. Expand try this : Use the Library Import Button , don't Drag and Drop I have seen this on some of my shared Libraries too. Imported just fine for me from the Symbols Forum. 10 items correct? Package Imports into X10 as well ...but won't open there , I did it 1st there by accident Mick Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now