Alaskan_Son

Ya, there are some nuances and your idea is still a good one. I was just pointing out that Charles did indeed realize that he could incorporate a wall to hold the outlet but that he was trying to avoid using that approach.

There are a few solutions but the easiest is probably this: Defaults Settings>Electrical>General Electrical>Switch - 3 Way>Edit>Change Name to "2-Way Switch". Click Okay. Again, there are a few options but most effective is probably this: CAD>CAD Block Management>Three Way>Edit>Change the "3" to a "2". Close the Edit Window and click Save.

Charles already mentioned this method earlier in thread. Its the method he was trying to avoid using. As he said:

That looks almost identical to one that I modeled and posted several years ago:

You actually don't need to convert to an array. upper_layers[0].material_data.quantity should do it.

The only walls with these off heights were manually manipulated...

There are a lot of complexities, oddities, and options to consider including but not limited to: Your Auto Story Pole Dimensions Defaults. In particular, whether or not you have Primary Height Marks Only checked. If you have this setting checked, you won't pick up on any wall heights aside from the very first one Chief finds without having to cross the model. The fact Top of Wall has been renamed "Top of Plate". Might seem like a minor detail, but I think it might be worth considering what Chief is actually measuring to. The wall (parametric object) and the actual plate (framing object) are 2 different things. Your 1st Floor Defaults. If for example you change your default ceiling height to 121-1/8" your problem goes away. If not, Chief is calculating your Top of Wall based on the (Baseline Height - Raise Off Plate - Vertical Structure Depth) or the location at which your roof is cutting off your wall. Repurposing Top of Wall isn't your only option. You can also simply use Rough Ceiling which is specifically designed to return the numbers I think you're actually looking for. You can manually snap to any of the relevant elevation data points after the dimensions are automatically generated. You're not limited to just those picked up by the Auto Dimension tool.

You might try placing a Temporary Point and toggling Edit>Edit Behaviors>Rotate/Resize about Current Point. Using this approach you can use the rotate handle or the Make Parallel/Perpendicular tool.

I assume you're wanting the "Attached To" column in the schedule to report "Wall" instead of "Floor"? If so, you can use a Custom Object Information Field along with a custom macro instead of the built in column. You could also simply exclude any of those objects from the schedule. If you need them for the quantity still though, you could add the appropriate quantity into a wall off to the side just as placeholders.

You need to make sure that the plan is closed before zipping or else the resulting file is empty. Chief locks the plan file while its open.

Are those Roof Beams or are they Rafters?

Build Foundation>Edit Default Slab Footing OR Default Settings>Walls>Slab Footing and then click on the Wall Types tab, check Pony Wall, and set the upper wall to Room Divider.

Try setting your Default Slab Footing to a Pony Wall using a Room Divider as its main wall type.

Sorry, but I don't believe that there are any defaults that will control that setting. A couple tips though: In my experience, the Display Bounding Box setting is only checked by default if the objects in the Block are different object types. If objects are all the same object type, then the setting is left unchecked. This doesn't necessarily solve your problem, it's just something to know. The bounding box is controlled by the Architectural Block layer's line style. Changing that line stye to the invisible line style will essentially just make it disappear. If your goal then is to always have no bounding box lines without having to open up any dialogs, you can either make sure to only block items of the same type, or change the line style for the Architectural Blocks layer. The latter option does however mean that you couldn't check Display Sub-Object using Block Layer.

Click on Plan Defaults and see what they say in there.

This doesn't necessarily mean that they're using the same material. You can have 2 materials with the same name.

I currently do this in a roundabout way by placing a break in the wall at that desired location. A small section of perpendicular Room Divider Wall at that desired break location can help give more refined control over where the break takes place and can be relocated to move the break. The main downside of course is that you're no longer dealing with a single wall. To keep the wall from auto merging you have to either toggle Auto Merge Colinear Walls off or change something about the adjacent walls (reverse layers, change a structural setting, or just create a copy of the wall type).

There definitely seems to be some weirdness with the Inserts Into Wall Symbol behaviors when it comes to both railing walls and off angle walls. Not something I feel too inclined to dig into, but I can easily reproduce and see what you're talking about. Here's a couple ideas fro you to possibly play with though: You might try using an Inserts Into Wall Symbol or even windows for the slat panels instead of the other way around. This way you'll simply be attaching to a solid wall. If you decide you still have to use a railing, you may find that inserting the symbol before converting to a railing will behave a little differently.

Having only taken Cedreo for a quick spin, I can't tell you for certain, but I can say with about 99% certainty that at best it offers about 5% of the capabilities you get with Chief. Its not even in the same league. The program seems to have been designed with the goal of quickly designing and visualizing spaces and little else. No CAD tools, no wall, floor, ceiling, or roof assembly layers, no framing, no parametric object components, no schedules or materials lists, not much of anything aside from basic 3D surfaces. As a tool for Construction Documents it seems almost useless. Its like comparing the calculator app to an Excel spreadsheet. If however all you need is the ability to quickly visualize a space or draw a floor layout...still no. I'd go with one of the Home Designer products.

I make it policy not to import feces.

Is there a question in there? Or are you just looking for a cookie?

It surely sounds that way.

HECK YEAH!!

I'm curious what this one is. Per the wording, it seems to be describing something we already have.

Whoa. This is huge.