ACADuser

OK so it's not a matter of checking BEARING in the wall dbx but changing the main layer of the wall. This is working for the most part but some of the balcony / exterior doors are not turning off.

See attached. I would like to display Load bearing walls only. How would you go about setting this up?

I suppose when I group selected something I may have scooped up the camera line & moved it. Locked layers will be my new procedure.

Not sure but I don't think so. I'll pay closer attention in the future. I'll put those cameras on a separate layer & lock that layer in the future. Thanks

I have had this happen several times. The Live View moved out of center in the Layout Box. I did drag the right side of the house 6" larger & same on left side but the center of the house remained constant. Why would the live view shift 10 feet or so down & mess up the layout view?

Yes a big fat CHANGE ORDER is indicated. The house is through permitting already & site work has begun. Of course they want it yesterday too.

Just want to run this problem by the group to see if there is a better way. I have a 3 story house completed!! The customer wants the house 12" wider, the first floor 8" taller and the center of the house to remain the same on the lot. The foundation must stay as-is and is on pile caps that are in place already. (Coastal Flood Zone) So the first floor 1 will change the default ceiling height plus 8", one problem solved. I will need to modify the stair. Foundation; move Elevator Pit & grade beams right 6" on right side Left side move grade beams left 6". Piles & Pile caps remain, adjust front entry pad. First to 3rd floor; turn "ALL Layers ON & unLocked" Use polyline Edit to move "All Visible" 6" Right & Left. Re build Roof Planes. Clean up as needed. Is that the preferred procedure?

Had to use this again today, Thanks for pointing the way.

I used a "Doorway" and added a Barn Door (Surface Sliding Door Arch Block) to the plan. Now I need to include it in the schedule but it appears as though Doorways are not included in the Door Schedule, Period. I have "Include in Schedule" checked.

Oh I see now. Thanks

Joe, I can't seem to locate that one in the "Macro of the Month" Can you tell me which month or send again. Thanks for your hard work.

I am able to draw them in as Rafters, not Trusses.

The closest I could build a truss to the corner is just under 4 feet.

with the room I was able to add the trusses. I think the Max plywood span may require the little trusses, no positive though.

OK the Room below with "Open Below" room type made the trusses buildable. This is from the truss manufacture, They have no problem building the small trusses.

The area below was a Balcony but owner did away with it. I just tried to add a ceiling plane about the height of the soffit & cut to the shape of the roof planes but about 1.5" inside the roof planes (0 pitch) But no luck. Also tried to grab the 3 roof planes & auto build but result was not correct. I'll try a room with room divider walls & open to below next.

Thanks Michael, that fixed the floor trusses. Look at the corner hip trusses on the next floor up, the very last truss will not build. Is that a bug? The roof up there is a normal roof. Thanks again.

See attached plan & picture. Hip trusses can not be drawn in some areas. Some floor trusses can not be extended but some can. Also same at 3rd floor same problem at areas over eve corners. Englewood.zip

When sharing details to the client I prefer this method: https://skfb.ly/XSqC I guess you could add the fixed view to the plan. But when you need annotation the fixed views are necessary

Joey, Looks very professional.

Well I did an ALL OFF & turned trusses only selected & Moved them -8" seemed to work OK

I have a house where I had to lower the first floor ceiling 8" & the floors above dropped 8" . I had a framing plan https://skfb.ly/XSqC But I do not want to rebuild ALL the framing for fear some of the modified framing will be removed. How do you lower the floor trusses & roof without messing yup the rest to the house framing? I have already selected the walls floor by floor & rebuilt them. Also most if the exterior walls are block walls. How would you display an outline for the block walls so you an tell they are there but not block the view of the framing? Erasing surfaces is too tedious & not permanent in the 3d view. Thanks

Post a plan. But looks like you have an extra hidden wall on the 2nd floor.

yes sir I do. I just want a toggle like press F20 to switch modes & F20 again to switch back. I go along doing my business but at times the lack of a better selection method gets to me and I go off on a search to fix this aggravation that I suppress daily. The Click & drag is the other one that drives me nuts. Oh I live with it but I don't have to like it.

You know your getting old when you forget the meaningful conversation you had in January. Well the SC keys are close together but the SI requires two hands or awkward left hand jump. Just complaining, sorry. Thanks for the reminder.