dskogg

I have to say even with the issues I use watercolour all the time to show clients design.. to me much better than trying to create a photorealistic rendering that always looks fake unless you take a ton of time.. watercolour takes secs..

In my area and I know in many locales in the states where plated roof trusses are used it is common to set heel heights( dimension of truss thickness at face of wall, top of wall to top of truss) ie 12” I have seen the usage of msr lumber and spf lumber for trusses across USA and Canada and there is a ton of it used. So my question is why does CA continue to just assume roofs are stick framed and don’t give an option for a heel height? And why don’t they show spf lumber as an option when this is a very prominent lumber being used in the US and Canada ? Come in CA smartin up!

I tried opening from startup and no go. i can’t believe I have lost the work. with auto save on how could I? very frustrated. If I saved over it can I undo? seems undo only works for active session.

I ran into windows not showing opaque and how I fixed it was change the glass to another glass and then change it back and it seemed to work this way every time... it is very annoying and takes time.

Hi All, i did some work on a plan and now i cant find the work i did on it. I have looked at auto archives, not there, searched my drive for other plans, looked in other locations and still cant find changes. I have autosave set for every 5 mins. Is there anything else i can do?

I need some help putting a grade wall below this basement level slab. I am trying to utilize the material list to calculate conc. Any suggestions on how to do this?

Another thing you cant do with box window is add corner boards? Unless i am missing something..this is dumb.

Thanks for all your answers guys...i did get it to work by making wall go thru and then adding a pass through. Yes a real PIA not being able to select opening without case or frame being on...whats with that? This seems like a problem CA needs to address,..this box window issue...why so complicated and why hasn't this already been done???? Come on CA...

Not sure if posting a plan will help, all I did was raise floor to try and create a box window and it leaves a hole n wall below. is there a different way this should be done?

I am having a great deal of trouble just making a window box, i raised floor but then wall below is open? I tried using the window box tool but it would not let me put on corner boards? This shouldnt be this hard, Help!!! Also my railing wall on balcony is two different colours? Whats going on? I tried deleting and putting new one and it still does not fix. I am not sure if my plan is corrupt but when i change a wall now it doesnt change it in 3d views?

Thanks, i did not know you could have multiple page layouts for different pages, this way i could have a cover sheet without title block etc.. I am watching video on layouts now to learn more. Thanks.

Thanks Chopsaw, this seemed to work. I have not been using page layout box before. But i put the # symbol into the layout page information but somehow one of my sheets now is missing my titleblock from page 0, any idea why?

I thought there was a way to show what page no on the layout this section detail was put on if the auto button for text below line was checked, not working for me?

I have set my plan display section to auto for the second line but they do not show the page of the layout that the section view has been sent to? what am i missing?

i just did a folding sliding door for a design, i used an overhead door, i built individual doors and made them a library item and inserted them in, i then used cad to draw them in plan. I had to draw a polygon over the overhead door dashed line to hide it, A lot of work to get this result.

Thanks David. Is there a way to have railing wall extend down to bottom of stair? The railing wall stops at top of stair and then stair is obviously set in.

Also stair railing should be continuous, how to do this in ca?

Thanks guys, that is great. The 3rd stair at top i had to pull wall from above down to fill in opening, but the framing shows thru, is there a way to do this so it does not happen?

HI everyone, i tried looking through forum to get this answer and i couldn't find an answer. Is there a simple way to show a knee wall with cap for stair railing. it is a very common way to do a stair railing cost effectively. I am hoping that in x9 they have this figured out? I took a look at videos and they did not help. I want a wall that follows stair with a cap on it. i know i could do polyline solids but that is dumb. Any help would be appreciated Cheers. David

Hi Kirk, thanks for reply, what if I lock certain layers, can someone with another same build open these? What if I turn off material list for layers, can this be turned on? David

I turned off both the material list and can lock any layers i choose to. This way customer can not do a material list and can only change unlocked layers. I tried this on home designer pro 2018 and it worked. Anybody know if someone had a premier version if they could rename file or unlock layers? Here is the file, let me know if anyone can change name and resave or if you can open file and change items. skogg material list and layers locked except cabinets.zip

Interesting, is this contract you would be willing to share? johnny then do you charge extra for the file?

I would appreciate if anyone could share their intellectual property note they place on drawings. I am assuming designers do?

I downloaded a trial of designer pro to see what it could do and it definitely opens x9 files.

Yes there is a switch to allow pro users to allow them to modify. i was more concerned that the customer now could do more with the design like budget takeoffs and such, if they want file they should pay extra for it. one customer is telling me how great there 2020 designer can do things, but I don't think 2020 can export material lists or attach area labels to things like counters, back splashes etc. the customer seems quite impressed with 2020's ray trace 360's. as everyone knows we can produce 360's very fast not in ray trace views that look great. i wonder how long it takes 2020 to produce a ray trace 360... as long as CA? i hardly ever do ray traces anymore, instead I do 360 renders and lots of water colour views.