-
Posts
733 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by dskogg
-
I am designing a mexican casa and they put walls up around entire perimeter of lot. They use a conc beam at top and 3/4 up and conc piers and then fill in with brick. Any way i could add this band in the middle using a fence? Also if i want to add a gate but still want the wall to go over the gate how do i do this with a fence? Maybe i use a wall instead? The fence is convenient as i can spec post spacing and top rail. Any suggestions on best way to do this?
-
Ever since ca came out with 360 views I have had this issue. if I log onto chief with phone and view 360 it will not go full screen and the only way out is to hit back button. But it if I send 360 link to someone using phone I can select link and it will fill the screen. anyond else having this issue ?
-
Ever since ca came out with 360 views I have had this issue. if I log onto chief with phone and view 360 it will not go full screen and the only way out is to hit back button. But it if I send 360 link to someone using phone I can select link and it will fill the screen. anyond else having this issue ?
-
Thanks for helping guys, i did not have the check mark lower wall split by abutting roof...i missed in on video as it was dark on bottom of vid.. Have a great day...
-
i tried both the wall align tool selecting upper wall and align below and also adjusted upper wall so the studs lined up. The walls are different, upper has siding and 3/8" sheathing, the lower 1/2" drywall. The upper main layer is set to the sheathing. Pulled walls away and snapped back to upper wall and still does not work.
-
here is a screen shot of both plans...exactly the same dimensions for walls as eric's...still does not work. There must be something else?
-
i lined up the main framing layer, but i have the build and dimension set to the exterior of sheathing...is this the problem?
-
Thanks eric, this works, i still do not know how you can do this and i can not. I tried a sample plan and the same thing happened? And also chief told me there was no solution other than polyline solids etc.
-
eric i did exactly what you did with no results...could i have different settings? I spoke to ca and they said to add a polyline solid to fix this.
-
thanks eric, i did what you said and pulled roof planes away and snapped back and nothing changed.
-
144 macewan park close nw as built.zip
-
I have a vaulted main floor abutting a 2nd floor, i have selected roof cuts wall at bottom for upper wall but it still is showing siding and an opening for floor joists, what am i doing wrong?
-
Thanks Michael, if i pull back section symbols then they come off my print page, it would be easy enough to use a polyline but with a terrain that slopes it would be much harder. This one i am showing flat but many are not. So would i just display the terrain only and then convert to a symbol and have it on another layer?
-
I shrink my terrain so that in elevations i see the side of the terrain skirt in elevation, but in my perspective i have to enlarge terrain so it looks right. I thought i could have multiple terrains on different layers to achieve this but it does not allow this. Any thoughts on how best to achieve this?
-
Yes the glass does seem to not show that well...my glass pendants glass you can hardly see..just the brass top and rod..
- 454 replies
-
- pbr
- physically based rendering
-
(and 1 more)
Tagged with:
-
I just close camera now and open up again and it works, kind of annoying, doesn't seem to happen all the time. I am quite happy with the pbr and have found great results once you set up lighting..here is a kitchen reno i am doing as part of a whole house reno/addition. Its great to have many lights..i have 36 lights turned on for this view
- 454 replies
-
- pbr
- physically based rendering
-
(and 1 more)
Tagged with:
-
i got the white out the other day on 20.1
- 454 replies
-
- pbr
- physically based rendering
-
(and 1 more)
Tagged with:
-
Will I be able to have multiple switch lines go to one switch symbol? in the case of the Dbl switch
-
So I can make multiple switch symbols that can have multiple switch lines attached? in some of the Reno’s I have done we had to use a special switch from legrand where they take their standard square switch and have one with two switches in the same space, so we had 2 Dbl switches and a single all in a 3 gang box. it gave us 5 switches. so if my symbols snapped together properly so that the square switches butt together I could then show some doubles with singles with some dimmers etc
-
So I can make multiple switch symbols that can have multiple switch lines attached? in some of the Reno’s I have done we had to use a special switch from legrand where they take their standard square switch and have one with two switches in the same space, so we had 2 Dbl switches and a single all in a 3 gang box. it gave us 5 switches. so if my symbols snapped together properly so that the square switches butt together I could then show some doubles with singles with some dimmers etc
-
The only thing is I would want them to snap at a certain way so I could just place 2-3-4 together also the switch and outlet symbols in plan are too big in my opinion, how to change this?
-
Thanks Mick. What about how chief places the switches together?
-
Hi I really like the Adorne outlets from Legrand, no screws, snap on face plates, square outlets and switches. I have made a sample switch, chief automatically snaps them together but can this be controlled? When there are two or more switches there is no space between switches or plugs. I do not like showing the old standard switches and plugs chief uses, i know you can turn off on a layer but if you want to show them they are old school, and even today decora is the standard...
-
How do i get rid of z fighting on 3d standard camera?
dskogg replied to dskogg's topic in General Q & A
Good idea, I will try that.