Randyc Posted October 2, 2015 Share Posted October 2, 2015 can some one tell me best practice to close the hole in my roof if you take a look at 3d view from back it is obvious rc.plan Link to comment Share on other sites More sharing options...
Greg_NY61 Posted October 2, 2015 Share Posted October 2, 2015 Here you go, the problem was you have to pull the wall on the attic floor back a little... if you select that wall and open dbx you will see it sticking up, just pull it back and it goes away. rc_fix.plan Link to comment Share on other sites More sharing options...
jbaehmer Posted October 2, 2015 Share Posted October 2, 2015 I am assuming you are talking about that small triangular hole at the peak. I say, just hip it right there and you are good. it is attached. rc hip.plan Link to comment Share on other sites More sharing options...
Randyc Posted October 2, 2015 Author Share Posted October 2, 2015 would you please look again? Link to comment Share on other sites More sharing options...
Randyc Posted October 2, 2015 Author Share Posted October 2, 2015 jbaehmer can you explin how you did this i am very new to this software Link to comment Share on other sites More sharing options...
jbaehmer Posted October 2, 2015 Share Posted October 2, 2015 pull the ridge end back as shown in the left picture. The as in the middle picture, break the roof plane in a couple spots. Then join the roof edges as shown in the right picture. Sorry...explaining in text isn't one of my strengths. Hope the pictures work or if someone else can explain it better. I need to get something to be able to do short videos. I think I can explain things better that way. Hope it helps. Link to comment Share on other sites More sharing options...
Gawdzira Posted October 2, 2015 Share Posted October 2, 2015 Randy, you use the break tool (hot key 3) at the critical points and then join the roofs (hot key 2) with the join tool. When I do this I work in plan view. Study the roof plan in plan view with his fix and you can see how to make these types of roof configurations work. Link to comment Share on other sites More sharing options...
Solution Randyc Posted October 2, 2015 Author Solution Share Posted October 2, 2015 jbaehmer thank you I opened both plans and split screen.. and made mine look like yours thanks again RC Link to comment Share on other sites More sharing options...
Randyc Posted October 2, 2015 Author Share Posted October 2, 2015 thanks to all who responded RC Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now