• Posts

  • Joined

  • Last visited

Everything posted by jbaehmer

  1. Hello. I am based out of Tacoma, WA and have done several projects in those areas. Feel free to reach out and I can help. Thanks.
  2. Thanks Mick for the mention! Hello Charles. Got your email and I sent an email back. Would love the opportunity to talk about your project. Feel free to call when you have a minute.
  3. Hello. We are out of Puyallup, WA. Would love to chat and see how we can help.
  4. I have a friend that is looking for a licensed architect in Texas. 3500 Sq Ft Commercial TI project in around the Dallas area.
  5. No... Not Luke. I have been using someone local for a bit. They don't have to use CA, so feel free to pass my info along. Though I am looking to get work caught up, I am also looking to hire an engineer on staff, though I am not expecting to find someone to hire on this forum, my focus with this post is to more get work caught up.
  6. I have alot of projects happening right now and my current engineer is being overloaded by me . I guess that is a good problem to have. Looking to see if there are any licensed structural engineers for WA state that are available for some more work. This can be remote work depending on experience. Again, I need this person to be a licensed WA State engineer. So, if you are one or know of one, please feel free to send them my way. Thanks.
  7. A partner of mine is licensed, please feel free to reach out to me. Thanks.
  8. I have a client that has an addition to their log cabin in Port Angeles, WA and I don't know the first thing about log cabins. Anyone here have experience with log cabins and looking for a side gig?
  9. When I first started using Chief, I my first few classes were with Mike. I owe a lot to him helping me getting started with CA. Thank you Mike! You will be missed.
  10. Hello. I am out of the Puyallup, WA area. I am familiar with WA state building codes and the new energy codes. Please feel free to reach out. Thanks.
  11. We can help. I have an interior designer on staff. Her name is Madison. madision@elevation.biz 253.317.0827
  12. hmmm... at least I know it is a setting I have. May need to re-create it and see if it still happens. Thanks.
  13. Not sure what I am doing wrong (if anything) for this. In the attached files, I have two layouts... 11x17 & 30x42. They both show up good on screen in regards to the space between the sheet edge and the border of the Plans. On the 11x17, it stays the same spacing on the PDF. However, on the 30x42, it looks good on screen, but after the PDF is made, it seems to shift down and to the right. I changed several settings trying to find out what is happening and I am stuck. Hoping you guys may have some luck with it. Fix 30x42 layout.zip
  14. Thanks, guys! Appreciate the kind words
  15. Hello. My name is Jared Baehmer. I own Cornerstone Home Designs in Puyallup. We specialize in what you are looking for..... Architectural designs that are engineered feasibility studies, and permit submittals. Would love the chance to speak with you and see how we can help. Jared Baehmer Cornerstone Home Designs jared@cornerstonehd.biz 253.777.2362
  16. Hello. My office is located down in Puyallup. Feel free to call me and we can talk. Thanks.
  17. Sounds good. I have done a number of homes up in the Bellingham area for a couple of contractors. If you can message me your email, I can send you some examples of my work. Thanks.
  18. Hello. My name is Jared Baehmer w/ Cornerstone Home Designs out of Tacoma, WA. If you are open to working remotely, I would like to chat with you and see how I can help you. my contact info if below. Look forward to speaking with you.
  19. Hello. If you are open to having someone work remotely for you, I am based out of the Seattle/Tacoma area. I am very familiar with the energy codes and local building department requirements as I have done several homes across the state. Please feel free to give me a call. Jared Baehmer Cornerstone Home Designs 253.777.2362 jared@cornerstonehd.biz
  20. There could be a number of items affecting it. I would look at the wall types and see where the dimension layer is set to. It "may" be on something other than the main layer or not the layer of the wall you are intending it to be. See Pc attached. It also could be which side the "main" side of the wall is drawn depending on what dimension layer you have the wall-type set for. I have all my wall-types set to the dimension to the main framing layer of the wall-type and no matter which way I draw the wall, it always dimensions to the bottom left sides of the walls every time. I would suggest looking at that dimension layer of your walls and see what it is set to. I noticed when I set the dimension layer in my wall-type to the sheetrock layer (Layer 3), then it changed positions of the dimensions on the plan.
  21. Hello. I just emailed you. Look forward to speaking with you.
  22. Hello, I see this is in the Seattle Area. I am out of Tacoma and can help you with this. Feel free to give me a call. contact info below.
  23. I am trying to make shelving in the highlighted space, but not sure how to do it. I need some cabinet guru's to help me out if possible. Thanks.