winterdd Posted Friday at 07:28 PM Share Posted Friday at 07:28 PM I like to use sills on my stem wall tops. I am helping a fellow CA user (their plan file) in the area and we all use settings differently. When I build the fdn the caps are not sitting on the stem wall tops. I do not have the option to vertical and horizontal settings. Any advice what this may be? Link to comment Share on other sites More sharing options...
CarrieS Posted Friday at 09:25 PM Share Posted Friday at 09:25 PM We don't have Wall Cap Offsets for full height walls (Walls that are not ponywalls/railings) in X17, but we do in X18. I'm not sure why the wall cap is sitting so high though... I wouldn't expect it there. Maybe post the plan so we could poke at it? Carrie Link to comment Share on other sites More sharing options...
PitMan71 Posted Friday at 09:54 PM Share Posted Friday at 09:54 PM Post the plan. Something you arent expecting is causing the behavior.... I would test it outside the existing model in the same drawing. Draw a small 4 sided room somewhere away from the model with the same wall types as the plan. Add the foundation as it is on the main house and add the cap like you would normally and see if the behavior changes. 1 Link to comment Share on other sites More sharing options...
winterdd Posted Friday at 10:32 PM Author Share Posted Friday at 10:32 PM Thanks guys let me see if I can compress the file. Link to comment Share on other sites More sharing options...
mtldesigns Posted Friday at 10:44 PM Share Posted Friday at 10:44 PM 3 hours ago, winterdd said: Any advice what this may be? First thing I'd look at is if there is a ceiling height? 1 Link to comment Share on other sites More sharing options...
winterdd Posted Saturday at 03:02 PM Author Share Posted Saturday at 03:02 PM plan file link....... https://drive.google.com/file/d/1Mbo_8sML34dGUvglwzw9GtHtCZKFRgW2/view?usp=drive_link Link to comment Share on other sites More sharing options...
tundra_dweller Posted Sunday at 12:52 AM Share Posted Sunday at 12:52 AM @winterdd Your plan link is private, it needs to be set to allow anyone with the link to access it. My first thought was that you have a ponywall set up with an airgap for the upper wall, but I seem to remember that wall caps with pony walls usually put the wall cap on top of the lower wall anyway. Interesting... 1 Link to comment Share on other sites More sharing options...
Mark3D Posted Sunday at 09:29 PM Share Posted Sunday at 09:29 PM You could try exterior room molding polyline 1 Link to comment Share on other sites More sharing options...
winterdd Posted Sunday at 10:08 PM Author Share Posted Sunday at 10:08 PM 38 minutes ago, Mark3D said: You could try exterior room molding polyline Yep, I may just have to do that. I was trying to avoid it. Thanks! Link to comment Share on other sites More sharing options...
winterdd Posted Sunday at 10:18 PM Author Share Posted Sunday at 10:18 PM On 7/31/2026 at 4:25 PM, CarrieS said: We don't have Wall Cap Offsets for full height walls (Walls that are not ponywalls/railings) in X17, but we do in X18. I'm not sure why the wall cap is sitting so high though... I wouldn't expect it there. Maybe post the plan so we could poke at it? Carrie This is a block stem wall by the way. I create these all the time with a rowlock feature and it is just not cooperating this time. Link to comment Share on other sites More sharing options...
PitMan71 Posted 19 hours ago Share Posted 19 hours ago 13 hours ago, winterdd said: This is a block stem wall by the way. I create these all the time with a rowlock feature and it is just not cooperating this time. try changing it to a railing wall, solid. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now