roof overhang and fascia issue

[Jambruins]

I have auto roofs on. Why are some of my roofs showing with a 2' overhang and why are some of the fascia's not aligning?

 

Thank you for the help. 

house plan.zip

[SHCanada2]

I havent checked your plan, but the overhang is set in the wall specification (if it differs from the build roof dialog). Also in the build roof dialog specify same height eaves if you are trying to match eave height

[Jambruins]

I have selected same height eaves and for some reason one gable end has a 24" overhang and the other end is 12" like the hip walls. 
 

[SHCanada2]

did you check the wall properties

 

[Mark3D]

Have a look at this plan i got it to work by using Make roof baseline polyline, they now control the roof keep that in mind when editing i think chief was having trouble with the different pitch on the back gable

Others may have a better solution 

Liberty house.zip

[SHCanada2]

that is interesting, the one gable eave is at 1'10". while all other eaves are the configured 12"

 

odd thing is, it is a gable, which means the eave depth has no impact on anything. I also changed the wall to a hip and added a small gable line, and it was also 1'10" eave, even though everything I can find defines the eave as 12". I tried without same height eaves and without same roof height. I'd be curious as to what CA says

 

 

[Doug_N]

I can make the roof behave by manually editing roof base polyline, but in auto, strangely some overhangs are 12' 10".  I don't understand why.

Liberty House.zip

[tundra_dweller]

Yeah it's really strange. Anytime you see roof baselines a foot away from the ext. main layer you know there's going to be problems but this is automatic roofs and I don't see anything that would make one end different from the other. There's got to be something but I sure can't find it.